Digital & Practical for Perfect Technical Customer Service
Even our BIM technology supports customer service solutions and offers you customized services that ensure sustainable efficiency and profitability in your building infrastructure through precise planning and proactive maintenance.
BIM-Services for efficient technical customer service
As a building operator, developer or investor, you benefit from our digital BIM-Services, which optimize your maintenance and service processes and reduce costs in the long term. The real added value lies in integrating BIM-Care with CAFM, 3D models and the expertise of our facility managers. This enables you to make technical customer service more efficient, identify problems early and use resources in a targeted manner. Our solutions offer precise planning and a sustainable building infrastructure. Use digitalization to operate your buildings economically and maximize the service life of your infrastructure.
Facility Management Support
Comprehensive, organised repair of almost any facilities, refrigeration & HVAC systems BIM/CAFM-driven maintenance planning, operator compliance and energy optimisation preserve building value.
BIM Care – Flexible Maintenance
Digital service contracts without long-term commitments or one-time maintenance for specific trades. Transparent, efficient and designed to preserve building value.
BIM-Service
the climate
Repair of refrigeration and air conditioning systems, leak testing, compliance with operator obligations, F-gas management & environmentally friendly disposal, including energy efficiency.
BIM-Service
for the air
Customer service for ventilation systems for fans, air filters, humidification and dehumidification, setting and balancing of air volume flows, ensuring hygiene, fire and smoke protection and heat exchangers.
BIM-Service
for the earth
Technical customer service for EMSR & EMC. Repair and maintenance of electrical, measuring, control and regulation technology, exclusion of interference radiation, photovoltaic systems with inverters and synchronization of generators and microgrid networks.
BIM-Service
for water
Technicians for many water systems: repair of drinking water technology, water filters, hygiene flushing systems, balancing of hot water circulation lines, contactless water drainage, oil and grease separators, lifting systems and the separation of drinking water, fire extinguishing and process water systems.
BIM-Service
for building protection
Construction customer service for buildings and their protection and safety. Repairs to avoid cold bridges, leaks and roof sealing. Fire protection systems for cable and pipe penetrations to ensure the structural integrity and longevity of buildings.
BIM-Service
for Diagnostics and Simulation
Just as the four elements—fire, water, earth, and air—work in harmony to sustain life, the principles of heat transfer, electron movement, gas and water flow are fundamental forces in energy efficiency. By optimizing these elemental processes, we can prevent energy loss and minimize costly investments in repair and recovery, ensuring a sustainable future.
BIM Service
for Expert Review and MEP Analysis
Just as the four elements – fire, water, earth, and air – work in harmony to sustain life, the principles of heat transfer, electron flow, and gas and water dynamics are fundamental forces in building performance. Through professional assessment and optimisation of these processes, we can prevent energy losses and reduce unnecessary investments in repair and recovery, ensuring a sustainable future.
Let's create your air conditioning service offer!
Even if creating air conditioning service offers seems complicated or does not require spare parts. At Coolenvi, worry-free building operators are our customers. We offer diagnostics and advice as part of our BIM Facility Management 4.0. This enables us to provide a complete set of services, special tools, and materials to create tailor-made offers for your specific requirements
Tip
BIMaudit | VDI Hygiene Inspector
€143.00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from €110.00*
Tip
BIMservice | Air Conditioner Technician
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The air conditioning technician for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly climates.
System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise
As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes:
Accurate leak tests:
We perform precise leak tests to ensure the proper functioning and longevity of your systems.
Adjustment and factory filling of the refrigeration circuit:
Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance.
Personal protection and environmental protection measures:
We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation.
Why Choose Us?
We are internationally recognized for our contributions to environmental protection and safety in building operations.
Expertise and access to AI technologies:
Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot, BIMcare, BIMpilot, or BIMphase
Tip
BIM Facility Manager
€880.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
€1,040.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
For healthy breathing air in the room
Coolenvi is not a contractor for air handling systems but is a service partner for optimization, conversion, hygiene and economical operation. Indoor air technology can be a complex overall system. We are your partner for supply technology preventative fire and smoke protection air filter technology and regulated occupancy-dependent economic efficiency.
Tip
BIMaudit | VDI Hygiene Inspector
€143.00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from €110.00*
Tip
BIMservice | Air Handling Technician
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The building's ventilation technician for supply and exhaust air handling units ensures draft-free and freshly filtered indoor air.
Expertise for optimal indoor air quality
Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades.
Efficient air filtration for clean indoor air
Intelligent ventilation concepts for energy savings
Professional maintenance and repair for maximum operational reliability
BIM-Service – for air quality that impresses.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Tip
BIM Facility Manager
€880.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
€1,040.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
Competent technicians for electrical measurement, control and regulation technology
Reliable service for control cabinets, digital controllers and building management technology
BIMservice | E&IC Control Engineer
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective.
How our climate-neutral E&IC Technician works
First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings.
Always fully configure supply chains
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot, BIMcare, BIMpilot or BIMphase.
Tip
BIM Facility Manager
€880.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
€1,040.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
Legionella in drinking water? - We solve it!
BIMservice also offers sanitary technicians for drinking water systems and hot water preparation.
Tip
BIMaudit | VDI Hygiene Inspector
€143.00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from €110.00*
Tip
BIM Facility Manager
€880.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
€1,040.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
Skilled Technicians for Construction Technology Services
Reliable solutions for preserving and enhancing the value of your building through expert services in construction technology and maintenance.
Tip
BIM Facility Manager
€880.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
We embody the essence of the four elements
Coolenvi binds the harmonious balance between man and nature. Immerse yourself in the fascinating symphony of life shaped by the essential elements that surround us. The air that we breathe flows through our lungs with freshness and vitality while the clear water that we drink quenches our thirst for purity. The warming fire that surrounds us gives us security and creates a pleasant atmosphere. As our foundation, the earth forms solid ground beneath our feet, symbolizing stability and connection to nature.
These four elements - air, water, fire and earth - are not only essential to life in nature but also sources of health and joy in life in buildings. Every moment fills you with technology, energy and joy as well as full of vitality and well-being.
This is how we achieve your ESG goals (Economical-Social-Governance)
Tip
BIMaudit | VDI Hygiene Inspector
€143.00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from €110.00*
Tip
BIMservice | Air Conditioner Technician
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The air conditioning technician for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly climates.
System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise
As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes:
Accurate leak tests:
We perform precise leak tests to ensure the proper functioning and longevity of your systems.
Adjustment and factory filling of the refrigeration circuit:
Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance.
Personal protection and environmental protection measures:
We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation.
Why Choose Us?
We are internationally recognized for our contributions to environmental protection and safety in building operations.
Expertise and access to AI technologies:
Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot, BIMcare, BIMpilot, or BIMphase
Tip
BIMservice | Air Handling Technician
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The building's ventilation technician for supply and exhaust air handling units ensures draft-free and freshly filtered indoor air.
Expertise for optimal indoor air quality
Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades.
Efficient air filtration for clean indoor air
Intelligent ventilation concepts for energy savings
Professional maintenance and repair for maximum operational reliability
BIM-Service – for air quality that impresses.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
BIMservice | E&IC Control Engineer
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective.
How our climate-neutral E&IC Technician works
First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings.
Always fully configure supply chains
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot, BIMcare, BIMpilot or BIMphase.
Tip
BIM Facility Manager
€880.00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIMaudit | MEP Appraiser - Advisory report
€1,185.00*
1. Appraisal - Specialist Area:
Ventilation technology
|
2. Appraisal - Concern:
Heating, ventilation, air conditioning - problems or failures
|
3. Appraisal - Purpose:
Technical advisory report
|
4. Appraisal - Services included:
Assessment of responsibilities
|
Language Version:
German
|
Work Location:
Remote
Our independent expert will prepare customized advisory and technical reports to help you understand, resolve, and professionally document the problem. This provides an objective assessment, clear technical insights, and a reliable basis for further action — be it for repair, negotiation, or prevention.
1. What is being assessed?
Each area of expertise requires its own report.
Ventilation technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinet)
Energy consulting & renovation
️2. Where about is advise requested?
🌡️ Heating, ventilation, air conditioning – problems or failures
📉 Loss of value / building damage
🚧 Defects in existing buildings, during renovation, or during new construction
3. What do you need the appraisal for?
🧑🏫 Technical advisory report
🏡 Assistance with home purchase
🏗️ Accompaniment during building inspections
📊 Property valuation
4. Which services are required?
Assessment of Responsibilities
Repair Recommendations
Energy Efficiency
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).
BIMaudit | MEP Appraiser - Damage Assessment
€1,185.00*
1. Appraisal - Specialist Area:
Ventilation technology
|
2. Appraisal - Concern:
Water damage, burst pipes
|
3. Appraisal - Purpose:
Legal dispute / preservation of evidence
|
4. Appraisal - Services included:
Cause of Damage & Condition Assessment Scope documented in detail
|
Language Version:
German
|
Work Location:
Remote
Do you have damage to your building's technology?
Whether it's water damage, a heating failure, or a dispute – here you can receive a customised report from an independent building services expert.
1. What is being assessed?
Ventilation technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinet)
Construction contracts & Building Acceptance
️2. Where did damage occur?
💧 Water damage, burst pipes
🔥 Fire damage, short circuit, power surge
🌫️ Mold, indoor air or odors
🧱 Construction defects or construction delays
📉 Loss of value / building damage
🌪️ Natural event (storm, hail, lightning, flood)>
3. What do you need the appraisal for?
⚖️ Legal dispute / preservation of evidence
🕊️ Mediation or out-of-court settlement
🧾 Review of a construction contract
💰 Submission to insurance / claims settlement
4. Which services are required?
Cause of Damage & Condition Assessment Scope documented in detail
Estimation of renovation costs
Repair recommendations
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).
BIMaudit | MEP Appraiser - Defect report
€880.00*
1. Appraisal - Specialist Area:
Air conditioning technology
|
2. Appraisal - Concern:
Construction defects or construction delays
|
3. Appraisal - Purpose:
Accompanying building inspections
|
4. Appraisal - Services included:
Preservation of evidence with images/measurement data
|
Language Version:
English
|
Work Location:
Remote
Our independent expert will prepare precise reports for you on defects in technical building equipment. Following a structured inventory, a thorough condition assessment is carried out – for repairs, negotiations, or prevention.
1. What is being assessed?
Ventilation technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinet)
Energy consumption
2. What defects are there?
🏡 Visual Collision Review of BIM Discipline Models
🧱 Construction defects or construction delays
📉 Loss of value / building damage
🚧 Defects during renovation or new construction
3. What do you need the appraisal for?
⚖️ Legal disputes / securing evidence
🏗️ Accompanying building inspections
🏡 Assistance with buying a house
4. What services are required?
Preservation of evidence with images/measurement data
Assessment of responsibilities
Support with acceptance or negotiations
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The expert reviews and prepares a customized report.
✔️ Optional: Additional services such as BIM management can be booked.
This package includes the preparation of a report in the following format:
Cover sheet
Table of contents
Description
Findings / Evaluation
Summary
Disclaimer
The report can also be provided in tabular form or as a project document on a digital platform upon request.
Note:
Please book the appropriate number of packages to cover the desired scope of services, depending on the task, building size, and intended use.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMpilot™, BIMservice™ or BIM Management. Processing takes place within a 4-day week (Monday–Thursday).
BIMaudit | MEP Arbitrator - Dispute Resolution
€1,185.00*
1. Appraisal - Specialist Area:
Construction contracts & Building Acccptance
|
2. Appraisal - Concern:
Construction defects or construction delays
|
3. Appraisal - Purpose:
Mediation or out-of-court settlement
|
4. Appraisal - Services included:
Support with acceptance or negotiations
|
Language Version:
German
|
Work Location:
Remote
This neutral mediator supports you in disputes concerning technical building equipment. The goal is an amicable solution that ensures the quick and long-term operation of the building technology in an appropriate manner.
Dispute resolution for building technology and contractual issues
As a neutral mediator, I conduct individual discussions, identify conflicts, and develop solution-oriented approaches with the parties involved. The goal is a quick, out-of-court settlement – fair, structured, and independently documented.
Your advantages:
Confidential one-on-one discussions without confrontation
Documented attempts at settlement for your protection
Legal position remains intact if settlement fails
Representatives (attorney, expert) possible
No clarification of liability – focus on solutions
Termination of mediation:
Mutual agreement
Declaration of failure
Termination by the mediator if there is no prospect of success
No payment of the advance fee
No participation in Appointments
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).
Tip
BIMcare | Building Controls Maintenance
€1,045.00*
Subscription:
One-time maintenance
|
System Type BIMcare:
EIC - Switch Cabinet + Power Distribution + Fuses
With BIMcare™, we take care of your switch cabinets, inverters, field devices, and digital controllers for building technical systems. Simple, clear, and without complex contracts – select your maintenance package via the dropdown menu.
Maintenance Price for Switch Cabinets
The price applies per switch cabinet up to 1000 mm wide. Use the dropdown menu to select the quantity, which determines the total price.
The Perfect Maintenance Plan
Three elements make this maintenance contract particularly transparent:
Dropdown 1 – Equipment Type: Switch cabinet, field devices, digital controller, or fire protection technology
Dropdown 2 – Duration: One-time, 24, 36 or 48 months, optionally with 36plus™ / 48plus™ extended warranty
Number of switch cabinets: determines the total price
The contract can be extended or reordered at any time.
Fixed Intervals Ensure Scheduled Maintenance
Regular maintenance ensures cost-effective and trouble-free operation of your building systems.
Maintenance Intervals
Equipment Type
Spring
Summer
Autumn
Switch Cabinet & Distribution
x
-
-
Field Devices & Consumers
x
-
-
Digital Controller & BMS/GLT & Network
x
-
-
Fire Protection & Emergency Power & UPS
x
-
-
Our Guarantee: Your Safe Harbor
Standard warranty on our installed control technology is 6 months from the installation date. With 36plus™ and 48plus™, the warranty can be extended up to 36 or 48 months.
Plan Your Supply Chains Optimally
Operations ideally take place between May and October, Monday to Thursday (4 days a week). Please note: This is not an all-inclusive service. Costs for repairs, travel, spare parts, consumables, and tools are typically provided by our Facility Manager or available via BIMpilot™, BIMdepot™, or BIMservice™.
Tip
BIMcare | Building Value Preservation
€250.00*
Subscription:
One-time maintenance
|
System Type BIMcare:
CON - Technical Fire Protection
We take care of the critical components of your building – from technical fire protection to roof and facade sealing, as well as drainage and wastewater systems.
Our maintenance and inspection services ensure that minor issues are identified and resolved early – efficiently, cost-effectively, and to preserve the long-term value of your building.
Essential Building Maintenance
Without long-term commitments, this service offers targeted inspections and maintenance for load-bearing, sealed, and safety-relevant building components. Here’s how it works in practice:
Select contract duration
Choose specific building components
Extend warranty for critical elements
The maintenance service automatically ends after the selected contract period. Seasonal inspections are optional, and new diagnostic or service requests can be made at any time. This contract covers buildings up to 1,000 m² and up to 5 floors.
Maintenance Intervals
Component
Spring*
Summer
Autumn*
Technical Fire Protection
-
x
-
Roof, Window & Facade Sealing
-
x
-
Drainage & Wastewater
-
x
-
Building Joints & Connections
-
x
-
Structural Load-Bearing Tests
-
x
-
*) Spring and summer inspections are optional and not included in standard maintenance.
Extended Warranty for Key Components
With 36plus or 48plus you receive a comprehensive maintenance package for critical building elements. The standard 6-month installation warranty can be extended up to 48 months.
Fully Configurable Supply Chains
Operations are ideally carried out Monday to Thursday (4 days per week) from May to October. Note: This is not an all-in-one package. Costs for repairs, travel, spare parts, consumables, and work materials are usually offered via our Facility Manager or found on BIMpilot™, BIMdepot™, and BIMservice™.
Variants from €180.00*
Tip
BIMcare | HVAC Maintenance & Care
€125.00*
Subscription:
One-time maintenance
|
System Type BIMcare:
AC - Air Conditioner Indoor Splitunit
We take care of your air conditioning systems, heat pumps, as well as cold rooms and chilled-water installations.
Without complex contracts, you receive simple and reliable inspection and maintenance services.
The Cool Maintenance
No long-term commitments: this maintenance service is economical, flexible, and sustainable.
Here’s how our climate-neutral craftsmanship works in practice:
Select your contract period
Define the number of air conditioning units
Extend warranty as desired
Maintenance automatically ends after the selected contract period. New service orders can be placed at any time.
Maintenance Intervals
System Type
Spring
Summer*
Autumn
Air Conditioning Unit
x
x
x
Chiller
-
x
x
Chilled Water Network
-
x
x
Cooling Machine
x
x
x
Heat Pump
x
-
x
*) Summer maintenance is optional and not included in the BIMcare contract.
The Coolest Warranty
With 36plus or 48plus, you receive an all-inclusive care package.
The standard warranty of 6 months from the installation date can be extended up to 48 months.
Configure Supply Chains Completely
Service operations ideally take place between May and October, scheduled from Monday to Thursday (4 days per week).
Please note: this is not an all-inclusive offer. Costs for repairs, travel, spare parts, consumables, and required work equipment are usually provided by our Facility Manager or can be found under BIMpilot™, BIMdepot™, or BIMservice™.
Tip
BIMcare | Photovoltaic System Maintenance
€180.00*
Subscription:
One-time maintenance
|
System Type BIMcare:
PV - Battery Storage
We take care about your solar systems, inverters, storage battery systems to ensure uninterrupted operation. There is inspection and maintenance without complicated contracts.
We maintain the power of the sun
With scheduled inspections, we look after climate-neutral power supplies, solar panels, consumption optimization and electricity storage systems. Just see how easy it is to combine the maintenance service:
Select contract durationSelect number of systemsExtend warranty
This always ends in accordance with the agreed contract term. New orders are possible at any time.
Maintenance intervals
Plant type
Spring
Summer
Autumn*
1x LiFePo4 battery storage
x
-
-
1-3x Inverter, MPPT's, IoT
x
-
-
up to 40sqm Photovoltaics and String combiner
x
-
x
We Guarantee The Power Of The Sun
Systems installed by us do usual start with a 6 month warranty and could extend the guarantee with 36plus or 48plus from the day of the invoice up to 36 or 48 months.
Always configure supply chains completely
Operations are ideally carried out Monday to Thursday (4 days per week) from May to October. Note: This is not an all-in-one package. Costs for repairs, travel, spare parts, consumables, and work materials are usually offered via our Facility Manager or found on BIMpilot™, BIMdepot™, and BIMservice™.
Tip
BIMcare | Potable Water Systems Maintenance
€690.00*
Subscription:
One-time maintenance
|
System Type BIMcare:
PW - Potable Water System Basics
We take care of drinking water systems, hygienic flushing systems, and sampling. Inspection and maintenance are carried out without complex contracts.
The supply of the most important resource: water
Every drinking water system must be inspected regularly – just like a car. We assume your operating responsibilities – reliably for companies and landlords. Our climate-neutral maintenance service ensures that your drinking water system functions efficiently and complies with legal requirements:
Regular maintenance & inspection
Drinking water samples & Laboratory reports (optional)
Action plans with facility or BIM manager (upon request)
Quality assurance maintenance for up to 3 samples
How to ensure drinking water quality – flexibly & efficiently! It's that easy to ensure quality assurance maintenance of drinking water systems:
Select contract term
Select number of systems
Extend warranty
This maintenance always ends according to the ordered contract term. New orders are possible at any time.
Maintenance intervals
Plant type
Spring
Summer
Autumn
PWW heating
-
-
x
Backwash filter
-
-
x
Expansion vessel
-
-
x
Sampling
-
-
x
Separations
-
-
x
Drinking water network
-
-
x
Circulation hydraulics
-
-
x
Our Warranty Promise
Our installation invoice includes a 6-month warranty, which can be extended to up to 48 months with 36plus or 48plus.
Always configure supply chains completely
Deployments ideally take place between May and October, Monday to Thursday (4 days per week). Please note: This is not an all-inclusive offer. Costs for repairs, travel, spare parts, sampling materials, laboratory analyses, consumables, and work equipment are generally provided by our Facility Manager or are available via BIMpilot™, BIMdepot™, or BIMservice™.
Tip
BIMcare | Ventilation Systems Maintenance
€200.00*
Subscription:
One-time maintenance
|
System Type BIMcare:
AHU - Fire Damper
We take care of your supply and exhaust units, air filtration, heat recovery, fire dampers, and steam humidifiers.
No complicated contracts required – just reliable inspection and maintenance. Simply book and we handle the rest.
Efficient Maintenance of Your Air Systems
Book exactly the maintenance you need – no hidden clauses or unnecessary paperwork.
Our technicians follow a clear checklist, reliably, digitally, and carbon-neutrally.
Repair offers and optional handyman services complete the service:
Select contract duration
Specify number of units
Optional equipment warranty extension
The maintenance contract automatically ends after the selected period. New orders can be placed anytime, either by you or our Facility Manager.
Maintenance Intervals
Unit Type
Spring
Summer*
Autumn
Air Handling Unit
x
x
x
Fire Damper
x
-
-
Steam humidifier
x
-
-
Ductwork
x
-
-
*) Summer maintenance is not included in this contract but can be optionally booked.
Warranty for Extra Security
Our standard warranty is 6 months from installation. With 36plus or 48plus, protection can be extended up to 48 months – ensuring trouble-free operation of your air systems.
Plan Operational Deployments Optimally
Deployments are ideally scheduled between May and October, Monday to Thursday (4 days per week). This is not an all-inclusive offer. Costs for repairs, travel, spare parts, consumables, and tools are usually provided by our Facility Manager or available via BIMpilot™, BIMdepot™, or BIMservice™.
BIMdepot | Operational Air Quality Measuring Device
€620.00*
BIMdepot Filter:
Air Handling Technology
This measuring device is used by our technicians to measure quality and air flow in workplaces.
We also recommend the following equipment for various tasks:
Air flow meter
Sound level meter
Smoke tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Air Volume Measuring Device
€66.00*
BIMdepot Filter:
Air Handling Technology
This measuring device is used by our technicians to measure air flow at air vents and in air ducts.
We also recommend the following equipment for various tasks:
Air quality meter
Sound level meter
Smoke test sticks
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Cable Locator
€25.00*
BIMdepot Filter:
Electrical engineering
The cable locator device is used by our technicians for quickly finding individual wires, defective cables or testing before connection or any wiring might change or is confusing.
We also recommend the following equipment for various tasks:
Appliance Tester
Cable Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Data Cable Tester
€35.00*
BIMdepot Filter:
Electrical engineering
The data cable tester was specially developed for quick on-site testing of connection and network cables only by our technicians. The tester has an RJ-11, RJ-45, IEEE 1394 (Firewire) and USB output socket. In addition, coaxial network cables can also be tested using the BNC connection.
We also recommend the following equipment for various tasks:
Appliance Tester
Cable Tester
Installation Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Disposal Station Refrigerants
€265.00*
BIMdepot Filter:
Air Handling Technology
This condenser station is used by our technician to recover, dispose of or collect refrigerant gases.
For various tasks, we also recommend the following equipment:
Recycled bottles for storage or disposal
Refrigeration fitting suitable for the refrigerant gas
Refrigerant scale for documentation of recorded gas quantities
Nitrogen Nitrogen for pressure testing before filling
Much more is needed to refill...
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Infrared Camera
€162.00*
BIMdepot Filter:
Construction Technology
This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads.
For various tasks, we also recommend the following equipment:
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Installation Tester IEC 60364-6/EN 50110
€105.00*
BIMdepot Filter:
Electrical engineering
The testing device is used by our technicians to check installation while commissioning or even if in operation to ensure the cleanest supply of electricity for your demand, including electromagnetic compliance.
We also recommend the following equipment for various tasks:
Appliance Tester
Cable Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Leak Scanner Refrigeration
€25.00*
BIMdepot Filter:
Air Handling Technology
This leak scanner is used by our technicians for assessments, leak testing and environmental important measures and documentation on refrigeration cycless.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Mobile Brazing Station
€149.00*
BIMdepot Filter:
Air Handling Technology
This mobile soldering station is used by our technicians to create professional connections on refrigeration circuits, plumbing, and heating systems. It also includes consumables such as brazing solder, soldering gases, and flux.
We also recommend the following equipment for various tasks:
Nitrogen gas cylinder as soldering forming gas
Nitrogen gas cylinder for pressure testing
Vacuum pump for evacuating refrigeration systems, for example
There's much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.