Construction Services – Protect Your Building & Ensure Longevity

This fork lift is used by our technician for the professional installation and positioning of heavy or bulky system components, particularly on façades or in ground-level outdoor areas. The maximum lifting height is 2.52 m. Installation tasks that cannot be safely or economically reached with this lift generally require the use of a suitable mobile crane. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This sampling kit is used for structured detection of key indoor pollutant groups and forms the basis for comprehensive laboratory analysis of indoor air quality in residential, office, and work environments without a known single source. The product includes sampling technology and laboratory analysis only. On-site sampling, coordination, assessment, or report preparation is not part of the scope of delivery. Analytical parameters Formaldehyde from wood-based materials and furniture Wood preservatives (e.g. PCP, Lindane, DDT, PCB, Chlorthalonil, Endosulfans) Moulds and yeasts (including non-visible contamination) VOC & solvents (e.g. benzene, toluene, alcohols, aldehydes, ketones) Plasticisers (e.g. DEP, DIBP, DBP, BBP, DEHP) Asbestos fibres (optional fibre analysis using specialised methods) Sampling principle Air samples are collected using a leased electronic sampling pump onto adsorption tubes. Sampling is standardised and designed for rooms up to approx. 100 m². Additionally, mould detection is carried out using sedimentation methods including an outdoor air reference sample. Laboratory analysis Gas chromatographic VOC analysis according to VDI-oriented procedures Scanning electron microscopy fibre analysis (e.g. SEM/EDX in case of asbestos suspicion) Microbiological testing (moulds & yeasts) Comparison with guideline and assessment values Evaluation (separately defined service scope) Laboratory report with structured measurement data - included Technical evaluation of results - optional Optional cause and mitigation interpretation by specialist bodies - optional Scope of delivery General: Laboratory analysis of all commissioned parameters Standardised result documentation Indoor air adsorption sampling: Complete sampling kit incl. leased sampling pump Special adsorption tubes for VOC, PAHs, formaldehyde, solvents Mould detection (indoor air) Culture media in dishes for two rooms Culture media for outdoor air reference sample Asbestos and mineral fibre detection Surface imprint sample on a specialised sampling carrier Note Leased sampling pump is included in delivery Overdue return may incur additional charges Results are for technical assessment only and do not replace medical diagnosis BIMdepot™ process logic For structured project workflows, the involvement of a BIM Facility Manager or a VDI Hygiene Inspector as a qualified indoor air specialist is recommended. Laboratory analyses are performed independently by specialised analysis partners.

This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads. For various tasks, we also recommend the following equipment: If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This personal protective equipment, consisting of a fall arrest harness and accessories, is used by our technician for professional inspection, supervision, work, installation and positioning on roofs or during work at height, mainly on façades, roofs, access balconies, balconies, balustrades or industrial facilities. Anything that cannot be reached safely or economically usually requires the use of a suitable lifting platform or aerial work platform. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with Regulation 303/2008 on chemicals and climate protection and Implementing Regulation (EU) 2015/2066.

Portable multifunction dosimeter for detecting ionizing radiation (beta, gamma, X-ray). Intended for internal use and supervised external operations. Real-time measurement, data logging and multi-alarm system compliant with common standards. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. You are advised to order the operational use of personal protection equipmemnt a OHS Occupational Health and Safety Manager from us, see under category BIMservice.

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort. Your Advantage: A Sustainable Supply Chain Without Additional Effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Plannable operations without additional coordination effort Charging Times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort. Your Advantage: A Sustainable Supply Chain Without Additional Effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Plannable operations without additional coordination effort Charging Times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

Our sustainable and customer-friendly solution enables the safe and efficient transport of people and permitted goods on international flight routes and within Europe. We combine speed, environmental responsibility, and legal certainty for your transport needs. What we transport Specialists for assignments at the destination Permitted goods, spare parts, and documents Other non-perishable, non-hazardous goods compliant with international aviation regulations What we do not transport For safety and legal reasons, we cannot transport the following goods: Animals of any kind Chilled or frozen goods Hazardous or legally prohibited goods Batteries (e.g. LiFePO4) or other lithium batteries in large quantities Liquids exceeding permitted air transport limits Gases, pressure containers, or compressed substances Explosive, flammable, or chemically aggressive substances Other goods prohibited under international aviation or safety regulations Customer notice: Pickup at destination Our service exclusively includes, depending on the option, national or international air transport. Delivery within the destination country or domestic transport at the destination is not included. The customer must collect the goods at the destination unless local transport has been booked. Freight is only transported from our warehouse on one route. Mobility at the destination, storage, parking, transfer, and accommodation costs are optional and must be borne and arranged by the customer. The total price depends on the selected options. Your advantage Fast and predictable availability of specialists and goods Sustainable, efficient, and legally compliant execution English as the business language for international operations Total price composition Description Price in EUR excl. VAT 1. Mobility at departure location - no Km 200.00 2. Mobility at destination - no Km 200.00 3. Non-EU round-trip ticket per person 2,100.00 4. EU round-trip ticket per person 300.00 5. One-way surcharge per 31 kg freight 300.00 6. Parking / transfer costs per location per vehicle/month if required 150.00 7. Overnight stay per night / person 120.00

If our staff is required on site, please also book the corresponding accommodation costs together with other BIM packages. Choose according to the defined location This accommodation package is valid for one person. It is provided as part of BIM Facility Management, BIMcare™, BIMservice™ or BIM-Management depending on route planning, seasonal requirements or urgency. Please note that this package must be booked on a daily basis and in line with the order: In the event of deviations, subsequent bookings are required before the contract is concluded, as no one should sleep on the street and we attach great importance to an optimal working atmosphere. If the employees work more than 4 days per week, overnight accommodation must be booked according to the daily flat rate, including at weekends. If the duration of the business trip or the travel times are not sufficient, weekends must be considered as standby time, but must be booked separately by the customer and at their own expense. Fully configure supply chains Ideally, a booking of 4 days per week, Monday to Thursday, is recommended. Please note that this is not an all-inclusive offer. Travel costs and work equipment are not included and can be found under BIMpilot™ or BIMservice™.