Building & Technologies

Products for modern buildings, sustainability and value retention

Find all items and facilities you need for the efficient operation, restoration, updating, maintenance and sustainable preservation of your building.

Everything for Construction and Facility Management

Discover our full range: Appliances, Technical gases, insulation materials, spare parts, cleaning liquids, electrical equipment, pipes and installation accessories – for efficient and sustainable building projects.

Note on Technical Gases: These may only be handed over to trained professionals within our franchise network. Orders can be placed by anyone, but delivery is strictly subject to safety and qualification requirements.

All other products – such as air filters, cleaning supplies, or installation materials – are available without restrictions and can be purchased directly.

coolenvi-BIMservice-consulting-female-recommendation.png?ts=1764251300

Commercial
Air Conditioner

IT Precision
Air Conditioner

Residential
Air Conditioner

Technical Gases

Air Filter

Insulation

Sanitary Installation Materials

Installation Materials

Electrical Installation Materials

Overview of this Category for building-related products

The following is a complete summary of the products and services offered within this category. For a more comprehensive experience, we recommend exploring the pillars above.

Filter

Aspen
Coolenvi
Daikin Europe
Danfoss
Dehn
EATON
Eurofins
Fränkische Rohrwerke
Gustav Hensel
Hager
Klauke
Novaer
OBO Bettermann
Phoenix Contact
Rockwool
Saint Gobain - Kaiflex
Spelsberg
Victron Energy
WAGO
WÜRTH
Zebtec

Air Handling Technology
Construction Technology
Potable Water Technology

0.75 mm²
1.0 mm²
1.5 mm²
2.5 mm²
4.0 mm²
6.0 mm²
10.0 mm²
16.0 mm²
25.0 mm²
35.0 mm²

Connection Cable
Earth-Underground Cable
Single-Core Cable

Comfort Area
Commercial Area
IT & Process Area

233 mm
287 mm
310 mm
320 mm
335 mm
435 mm
489 mm
530 mm
592 mm
620 mm
710 mm
850 mm
874 mm

Unisex

For Facades 3.6 - 14.0 kW
For Facades up to 3.5 kW
For Floor or Flat Roof 3.6 - 14.0 kW
For Floor or Flat Roof up to 3.5 kW
With 4 end caps
Without 4 end caps

English
German

1.5 / 1

4.50
6.00

-
A++ cool / A++ heat

-
3 - 50
3 - 55
3 - 100

3.10 (SHR 0.86)
4.19 (SHR 0.91)
5.24 (SHR 0.86)
5.49 (SHR 0.90)
8.17 (SHR 0.86)
10.2 (SHR 0.86)
19.3 (SHR 0.86)
20.87 (SHR 0.85)
26.0 (SHR 0.93)
33.6 (SHR 0.86)

6 mm
6,4 mm | 1/4"
9,5 mm | 3/8"
10 mm
12 mm
12,7 mm | 1/2"
15 mm
15,9 mm | 5/8"
16 mm
18 mm
19,05 mm | 3/4"
22 mm
28 mm

Ash wood
White plastic

2.00 / 0.76 - 2.40
2.50 / 0.60 - 3.50
2.50 / 0.80 - 3.00
2.50 / 0.95 - 3.20
3.50 / 0.90 - 4.20
3.50 / 1.05 - 4.10
4.20 / 1.10 - 4.70
5.00 / 0.90 - 6.00
5.00 / 1.10 - 5.35
5.00 / 1.20 - 5.60

20 - (2.0 | 6.800)
25 - (2.5 | 8.500)
35 - (3.5 | 11.900)
45 - (4.5 | 15.350)
50 - (5.0 | 17.000)

5.00 / 1.20 - 5.60 min.-max.
7.10 / 1.90 - 8.00 min.-max.
9.50 / 3.00 - 11.20 min.-max.
10.00 / 3.10 - 12.00 min.-max.
12.50 / 3.10 - 14.00 min.-max.

50 - (5.0 | 17.000)
70 - (7.0 | 23.900)
75 - (7.5 | 27.600)
100 - (10.0 | 34.100)
125 - (12.5 | 42.650)

FIT | Rework insulation of refrigeration pipes

1 Day
1 Month
1 Week

E | 1 Phase | 16 A | no Surge Arrester
E | 1 Phase | 16 A | plus 2-Pole Surge Arrester
E | 1 Phase | 16 A | plus 4-Pole Surge Arrester
E | 1 Phase | 20 - 25 A | no Surge Arrester
E | 1 Phase | 20 - 25 A | plus 2-Pole Surge Arrester
E | 1 Phase | 20 - 25 A | plus 4-Pole Surge Arrester
E | 1 Phase | 32 A | no Surge Arrester
E | 1 Phase | 32 A | plus 2-Pole Surge Arrester
E | 1 Phase | 32 A | plus 4-Pole Surge Arrester
E | 1 Phase | 40 A | no Surge Arrester
E | 1 Phase | 40 A | plus 2-Pole Surge Arrester
E | 1 Phase | 40 A | plus 4-Pole Surge Arrester
E | 1 Phase | 50 A | no Surge Arrester
E | 1 Phase | 50 A | plus 2-Pole Surge Arrester
E | 1 Phase | 50 A | plus 4-Pole Surge Arrester
E | 1 Phase | 63 A | no Surge Arrester
E | 1 Phase | 63 A | plus 2-Pole Surge Arrester
E | 1 Phase | 63 A | plus 4-Pole Surge Arrester
E | 3 Phase | 16 A | no Surge Arrester
E | 3 Phase | 16 A | plus 4-Pole Surge Arrester
E | 3 Phase | 20 - 25 A | no Surge Arrester
E | 3 Phase | 20 - 25 A | plus 4-Pole Surge Arrester
E | 3 Phase | 32 A | no Surge Arrester
E | 3 Phase | 32 A | plus 4-Pole Surge Arrester
E | 3 Phase | 40 A | no Surge Arrester
E | 3 Phase | 40 A | plus 4-Pole Surge Arrester
E | 3 Phase | 50 A | no Surge Arrester
E | 3 Phase | 50 A | plus 4-Pole Surge Arrester
E | 3 Phase | 63 A | no Surge Arrester
E | 3 Phase | 63 A | plus 4-Pole Surge Arrester

PW - Glycol Brine Recycling Disposal
PW - Glycol Brine Storage Refill

Accredited & accompanied | biologically
Accredited & accompanied | biologically & chemically
Accredited & accompanied | chemically
Direct | biologically
Direct | chemically
Direct | chemically & biologically

DE - From Essen
ZA - From George

196 mm
210 mm
233 mm
287 mm
465 mm
489 mm
535 mm
540 mm
560 mm
565 mm
592 mm
617 mm
710 mm
712 mm
930 mm

2.50 / 0.76 - 3.30
3.20 / 0.65 - 5.80
3.20 / 0.76 - 3.90
3.20 / 0.85 - 4.40
4.00 / 0.70 - 6.30
4.20 / 1.00 - 5.00
5.00 / 0.90 - 6.00
5.40 / 1.10 - 6.00
6.00 / 0.80 - 7.20
6.00 / 1.30 - 6.30

5.60 / 0.90 - 7.30 min.-max.
8.00 / 1.30 - 11.30 min.-max.
11.20 / 3.00 - 13.00 min.-max.
14.00 / 2.60 - 16.50 min.-max.

~ 3.00 (562)
~ 4.00 (802)
~ 5.70 (1102)
~ 8.70 (1101)
~ 10.90 (1401)

0,25 A
0,63 A
1 A
1,6 A
2,0 A
2,5 A
4,0 A
6,0 A
10 A
16 A
20 A
25 A
32 A
35 A
40 A
50 A
63 A

48 mm
96 mm
200 mm
300 mm
350 mm
500 mm
600 mm

Monocrystalline

1.11
1.50
1.55
1.88
1.90
2.20

220-240/1/50
380-415/3/50

220-240/1+N/50

220-240/1/50

I 34/40/43 - O 46
I 35/37/39/41 - O 49
I 37/39/41/43 - O 49
I 39/41/43/45 - O 48
I 39/42/45 - O 46
I 39/42/45 - O 49
I 60 - O 59
I 61 - O 50
I 63 - O 2x59
O 59.7

A++
A+++
A+++ / A++
A++ / A+

A+++ cool / A+++ heat
A+++ cool / A++ heat
A++ cool / A++ heat
A++ cool / A+ heat
A+ cool / A+ heat
A / A

6.4 (¼) - 12.7 (½) / 5 - 50
9.5 (3/8) - 15.9 (5/8) / 3 - 50
12.7 (1/2) - 22 (7/8) / 3 - 100
31.75 (1 ¼) - 31.75 (1 ¼) / -

3.29
3.50
4.17
4.36

3.48
3.86
4.10
4.32

2 - 10
2 - 15
2 - 20
2 - 25

5 - 50
5 - 75

EU3/G3/COARSE-45%
EU4/G4/COARSE-60%
EU5/F5/ePM10-60%
EU6/F6/ePM10-75%
EU7/F7/ePM1-60%

Chemical fiber
Synthetic

35 - (3.5 | 11.900)
45 - (4.5 | 15.350)
60 - (6.0 | 20.500)
80 - (8.0 | 27.300)
100 - (10.0 | 34.100)
190 - (19.0 | 64.800)
225 - (22.5 | 76.700)

526 m3/h
850 m3/h
885 m3/h
1359 m3/h
1606 m3/h
1659 m3/h
1700 m3/h
1735 m3/h
2565 m3/h
2740 m3/h
2800 m3/h
3242 m3/h
3400 m3/h
4882 m3/h
5079 m3/h

20 mm - Galv. Steel
25 mm - Galv. Steel
25 mm - Plastic
48 mm - Cardboard
96 mm - Cardboard

R32 (675)

540/660/800 (561)
870/990/1200 (801)
1500/1740/2100 (1101)
1500/1740/2100 (1401)

230 / 1 / 50

41 / 9
54 / 12

1.38 / 1
2.30 / 1

0.9 / 1
2.8 / 1

Minimum €

–

Maximum €

Free shipping

Aluminium Adhesive Tape for Pipe Insulation 75mm 45m Roll

Item - Quantity: 1 Pc

Aluminium adhesive tape, specially designed for sealing joints and connections on insulated copper pipes. The standard fixing tape is easy to apply and provides long-lasting sealing and protection against moisture, dust, and corrosion. Ideal for installations in heating, air-conditioning, and refrigeration systems. Material: Aluminium Dimensions: 75 mm x 0.003 mm, 45 m per roll Weight: 0.7 kg per roll Unit: Pc. Perfect for long-lasting sealing of pipe joints and insulation

€15.12* €15.50* (2.45% saved)

Tip

ANTIFROGEN L - Heat Transfer and Antifreeze Concentrate Propylene Glycol

Item - Quantity: 22 Kg

ANTIFROGEN L is a high-performance propylene glycol-based heat transfer and antifreeze fluid for closed heating and cooling systems. It protects installations against frost, corrosion and deposits and is used in industrial, building technology and process cooling applications. Internally galvanized pipes should be avoided as glycol-water mixtures can dissolve zinc. The fluid contains highly efficient corrosion inhibitors and is designed for mixing with water (min. 25% v/v and 35% recommended in Germany). Typical applications include heat pumps, refrigeration systems, HVAC systems, sprinkler systems and industrial temperature control systems. Base: propylene glycol with corrosion inhibitors Application: closed heating and cooling systems Operating temperature: approx. -30 °C to +150 °C Minimum concentration: 25% v/v Colour: blue Odour: neutral, odourless System protection: frost, corrosion and deposit protection Hazard classification May cause eye irritation Not classified as acutely toxic under proper use Not classified as CMR substance Environmental impact Not acutely hazardous to water (depending on concentration) Biodegradable under controlled conditions Must not be released into environment or wastewater Technical conclusion ANTIFROGEN L is an industrial heat transfer fluid with integrated corrosion protection for long-term use in closed energy and cooling systems.

Content: 22 Kg (€13.06* / 1 Kg)

€287.23*

ASPEN Condensate Pump PERI – Replacement Hose MS-1633

Original MS-1633 replacement hose for peristaltic kneading pumps of the ASPEN Condensate Pump PERI. Easy swap, reliable performance, durable spare part.

€31.80*

ASPEN Condensate Pump PERI PRO+

The new Peri Pro+ is a float-operated condensate pump offering exceptional reliability with an industry-leading 5-year warranty*. Based on stepper motor technology and software control, this version features intelligent pumping technology similar to the latest mini-pumps – always with the goal of minimizing noise and hose wear. The Peri Pro+ is ideally suited for split systems with high walls, ducted units, and floor-standing and chassis units. It's perfect for hotel rooms and other remote installation locations. *Hose not included and subject to proper installation and operation.

€462.00*

ASPEN Condensate Pump Silent+ Mini Lime Slimline – Signal White

The new and improved 5th generation Silent+ Mini Lime is the quietest corner duct pump on the market at just 16 dB(A). Quick, easy, and flexible to install with proven technology, high flow performance, and low power consumption. Maximum performance, high reliability, and energy efficiency at near-silent operation. Ideal for comfort and commercial areas where low noise is critical. Features: Backward-compatible Plug & Play cable Compatible with all common duct systems Fast installation – no vibration damper or anti-siphon valve required Flow rate up to 40 l/h with up to 10x lower power consumption Suitable up to 46 kW / 157000 Btu/h Vibration damper for quiet operation Pump can be installed in duct angle, left or right Various duct systems available Easy maintenance Included: Silent+ Mini Lime pump with 1.5 m fixed power cable Construction with vibration damper and backflow protection 500 mm inlet hose (14 mm ID) 40 mm PVC vent hose (6 mm ID) Pump angle 800 mm straight duct (not for OEM) Seal and ceiling penetration Inlet adapter Mounting kit Installation manual

€142.40* €179.00* (20.45% saved)

Big Bag for filter disposal

Our large capacity bag is specially designed for the disposal of used air filter materials from air conditioning systems. It offers enough space for three bag filters with the dimensions 592x592 and a maximum bag length of 600mm in the standard size of the big bag. Depending on requirements, additional products or services may be required, such as:LogisticsDisposal costsStaff deploymentMultiple big bags ...

€30.85*

BigFoot Flat Roof Support Bracket Base SET 1500x1200 mm

Item - Quantity: 1 Pc

The Big Foot Multi Frame XL is an extremely robust and flexible mounting system for flat roofs. It has been developed for quick and easy installation and ensures maximum stability as well as unrestricted roof usability – even when installed. Thanks to the three integrated crossbars and the infinitely expandable design on both sides, the system can be optimally adapted to different requirements. Each support foot is individually height-adjustable and removable if required, allowing precise alignment even on uneven roof surfaces. The large footplates ensure even load distribution and protect the roof surface. With a maximum load capacity of 500 kg the Multi Frame XL is ideally suited for demanding applications. Inclined anti-vibration mats as well as a higher construction version are optionally available to meet additional requirements. Technical features: Easy installation Extremely robust construction 3 crossbars Infinitely expandable from both sides Roof remains fully functional Individually height-adjustable and removable feet Foot dimensions (L x W): 305 x 305 mm Height adjustment: 335–440 mm Maximum load: 500 kg Threaded rod: M24 Optional: increased construction (height adjustment 335–660 mm) Optional: inclined anti-vibration mats Order information: Product: Big Foot Multi Frame XL (boxed) Dimensions: 1500 x 1200 mm Feet: 4 x 305 mm Article code: BFS-1515-000 Weight: 43 kg EAN: 5414618981616 SKU: 10371320000 OEM: B9731 Unit: Pc. Minimum order quantity: 1 Pc. Brand: Big Foot Systems Product group: A The Big Foot Multi Frame XL stands for a future-proof, durable and flexible mounting solution of the highest quality.

€772.00*

BigFoot Multi Frame XL Extension – 1500x1200 mm

Item - Quantity: 1 Pc

The Big Foot Multi Frame XL Extension is a robust and versatile extension for flat roof mounting systems. Designed for easy assembly, it supports a wide variety of units while maintaining full roof functionality. Each of the two support feet measures 330x330 mm and is individually height-adjustable from 330 to 610 mm, allowing precise alignment on uneven surfaces. The large footplates ensure even load distribution and protect the roof surface. With a maximum load capacity of 500 kg, the extension is suitable for demanding applications. Supplied boxed with clamp kits, it features hot-dipped galvanized steel construction, recyclable EPDM foam mats, and recycled glass-filled nylon feet. Salt spray tested to 1000 hours. Technical features: Compatible with a wide variety of units Feet dimensions: 330 x 330 mm Height adjustment: 330–610 mm Maximum load: 500 kg Simple to assemble Supplied boxed with clamp kits Hot-dipped galvanized steel Recyclable EPDM foam mat Recycled glass-filled nylon feet Salt spray tested to 1000 hours Order information: Product: Big Foot Multi Frame XL Extension – 1500x1200 mm – 2x330 mm Foot Article code: BFS-1228-000 External dimensions: L1500 x W1200 mm Weight: 34 kg EAN: 5414618006753 SKU: 10425840000 OEM: BN9732 Unit: Pc. Minimum order quantity: 1 Pc. Brand: Big Foot Systems Product group: A The Big Foot Multi Frame XL Extension provides a durable, flexible, and high-quality solution for extending flat roof mounting systems.

€592.00*

Tip

BIMcare | Consumables-SET Air Conditioner

Item - Quantity: 1 Pc

The BIMcare™ Consumables Package for Air Conditioning is an optional addition to BIMcare™ maintenance. It enables predictable costs, audit-proof documentation, and supports compliance with operator obligations for your air conditioning and ventilation systems. Objective Ensuring hygienic and cost-efficient operation of air conditioning systems through the use of standard consumables. Included Materials Filter materials (fine filters, activated carbon filters) Disinfectants and cleaning agents for split-type indoor and outdoor units Marking, sealing, and labeling materials for maintenance schedule Disposable gloves, cleaning cloths, and functional test materials Not Included Renovation or replacement of air conditioning units Extensive mold removal or special measures External lab costs or special testing equipment, e.g., for leak detection Delivery only in conjunction with BIMcare maintenance.

€45.00*

Tip

BIMcare | Consumables-SET Air Handling Unit

Item - Quantity: 1 Pc

The BIMcare™ Consumables Package for a Combined Supply and Exhaust Air Unit is an optional addition to BIMcare™ maintenance. It provides predictable costs, audit-proof documentation, and supports compliance with operator obligations for your ventilation systems. Objective Ensure hygienic and cost-efficient operation of ventilation systems through the use of approved consumables according to VDI 6022. Included Materials Disposable face masks, gloves, protective clothing All-purpose cleaners, disinfectants for heat exchangers and surfaces Cleaning cloths (disposable and reusable), sponges, drying cloths, trash bags Brushes, lamella combs, vacuum bags according to VDI 6022 Marking, sealing, and labeling materials for maintenance points Not Included Special air filters or standard filters for multi-stage systems Drive belts Extensive mold removal or hygiene/special measures External lab costs or special sampling/testing materials, additional personnel Delivery only in conjunction with BIMcare maintenance.

€160.00*

Tip

BIMcare | Consumables-SET Potable Water

Item - Quantity: 1 Pc

The BIMcare™ Consumables Package for Drinking Water is an optional addition to the BIMcare maintenance service. It allows predictable costs, audit-proof documentation, and supports compliance with operator obligations. Objective Ensuring drinking water hygiene using material-friendly, drinking water-compliant consumables. Included Consumables Disinfectants and flushing agents (standard- and material-compliant) Chemicals for hygiene flushing (e.g., citrate or peroxide-based) Sampling consumables (sterile bottles, disposable tubes, adapters) Seals, O-rings, standard connectors (EPDM/silicone, drinking water compliant) Cleaning and care chemicals for fittings and surfaces Marking and labeling materials Not Included Renovations, pipe replacements, shock disinfections External lab costs and special sampling kits (e.g., item ZT80401.1) Hygiene flushing plans or inspection checklists Delivery only in combination with a BIMcare maintenance contract.

€95.00*

Tip

Rental product

BIMdepot | Operational Indoor Air Comprehensive Sampling Kit – Plus Lab Analysis

BIMdepot Filter: Air Handling Technology | Language Version: German | Task - Sampling Service : Direct | chemically & biologically

This sampling kit is used for structured detection of key indoor pollutant groups and forms the basis for comprehensive laboratory analysis of indoor air quality in residential, office, and work environments without a known single source. The product includes sampling technology and laboratory analysis only. On-site sampling, coordination, assessment, or report preparation is not part of the scope of delivery. Analytical parameters Formaldehyde from wood-based materials and furniture Wood preservatives (e.g. PCP, Lindane, DDT, PCB, Chlorthalonil, Endosulfans) Moulds and yeasts (including non-visible contamination) VOC & solvents (e.g. benzene, toluene, alcohols, aldehydes, ketones) Plasticisers (e.g. DEP, DIBP, DBP, BBP, DEHP) Asbestos fibres (optional fibre analysis using specialised methods) Sampling principle Air samples are collected using a leased electronic sampling pump onto adsorption tubes. Sampling is standardised and designed for rooms up to approx. 100 m². Additionally, mould detection is carried out using sedimentation methods including an outdoor air reference sample. Laboratory analysis Gas chromatographic VOC analysis according to VDI-oriented procedures Scanning electron microscopy fibre analysis (e.g. SEM/EDX in case of asbestos suspicion) Microbiological testing (moulds & yeasts) Comparison with guideline and assessment values Evaluation (separately defined service scope) Laboratory report with structured measurement data - included Technical evaluation of results - optional Optional cause and mitigation interpretation by specialist bodies - optional Scope of delivery General: Laboratory analysis of all commissioned parameters Standardised result documentation Indoor air adsorption sampling: Complete sampling kit incl. leased sampling pump Special adsorption tubes for VOC, PAHs, formaldehyde, solvents Mould detection (indoor air) Culture media in dishes for two rooms Culture media for outdoor air reference sample Asbestos and mineral fibre detection Surface imprint sample on a specialised sampling carrier Note Leased sampling pump is included in delivery Overdue return may incur additional charges Results are for technical assessment only and do not replace medical diagnosis BIMdepot™ process logic For structured project workflows, the involvement of a BIM Facility Manager or a VDI Hygiene Inspector as a qualified indoor air specialist is recommended. Laboratory analyses are performed independently by specialised analysis partners.

€956.80*

Details

Rental product

BIMdepot | Operational Recycling Cylinder Refrigerant

BIMdepot Filter: Air Handling Technology | Task - Duration: 1 Day | Task - Work Location: DE - From Essen

This cylinder is used for collecting, transporting, and disposing of up to 9 kg of refrigerant gases. It is exclusively operated by certified professional technicians. All processes are fully documented via a CAFM system ensuring traceability and environmental compliance. Disposal, hazardous goods surcharge, and container cleaning are included. We also recommend for various tasks: Disposal station Refrigeration fittings Refrigerant scale Nitrogen and service valves for pressure testing before commissioning or filling Refrigerants, oil recycling containers, vacuum pumps and additional equipment If listed as a rental item, shipment is typically combined with the Coolenvi™ service vehicle. Air freight is not permitted. For island or overseas operations, please verify logistics in advance. Coolenvi is certified under EU Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

€382.30*

Details

Rental product

BIMdepot | Operational Recycling Glycol Brine IBC 600 L

BIMdepot Filter: Potable Water Technology | Task - Duration: 1 Week | Task - PW: PW - Glycol Brine Storage Refill | Task - Work Location: DE - From Essen

The IBC container 600 L (REKO) is a reconditioned industrial container for rental use for safe storage, mixing and internal handling of glycol solutions. In particular, Antifrogen type N is classified as dangerous goods and must under no circumstances be disposed of via public sewage systems or by contaminating groundwater. Use is exclusively intended for compatible, non-hazardous media. Not suitable for acids, highly aggressive chemicals or other hazardous substances. The container must be cleaned by the lessee prior to return or can optionally be processed via a recycling concept including disposal costs. Transport costs are not included and can optionally be booked via BIMconnect™. Sustainability & Service: The inner container is made of HDPE (transparent/natural) and allows easy and safe level monitoring. A stable steel grid frame ensures mechanical durability in daily use, while the robust plastic pallet enables flexible internal transport with pallet trucks or forklifts. Volume: 600 litres Inner container material: HDPE Pallet: plastic, forklift accessible Filling opening: 225 mm Outlet valve: 2" sliding valve DN50 Outlet coupling: 3/4" valve with hose connection Dimensions: 1200 × 800 × 1013 mm Condition: REKO (cleaned, inspected) Approval: no UN dangerous goods approval For different applications we also recommend: Antifrogen L - antifreeze fluid Extraction pump Hose trolley Mixing tank for glycol preparation Manual pressure filling pump station Leak test station, sealing compounds and additional accessories If the item is listed as a rental product in your distribution channel, it is typically shipped together with the Coolenvi™ service vehicle. Please note that due to logistical restrictions these rental items cannot be shipped by air freight. For island or overseas operations, shipping feasibility and availability must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.

€215.00*

Details

Tip

BIMdepot | Potable Water Sampling Kit - Plus Lab Analysis

Task - Sampling Service : Direct | biologically

The BIMdepot drinking water test kit enables professional sampling and laboratory analysis of drinking water at one defined sample-taking point. Samples are collected in certified containers and sent to an accredited laboratory for analysis and evaluation. The results provide a reliable basis for assessing water quality and potential contamination from chemical or biological parameters. Sampling and evaluation should be performed by qualified professionals. 🔬 Analysis scope Depending on the selected variant, the following parameters are analyzed: Chemical parameters: Lead (Pb), Nickel (Ni), Copper (Cu) Biological parameters: Coliform bacteria, Enterococci, Pseudomonas aeruginosa, Legionella 📦 Variant overview Direct | Heavy metals & chemistrySelf-sampling for chemical analysis Direct | Bacteria & microbiologySelf-sampling for microbiological testing Direct | Full analysisSelf-sampling for combined chemical and biological analysis Accredited & supervised | Heavy metals & chemistryAccredited sampling with coordinating support for heavy metals Accredited & supervised | Bacteria & microbiologyAccredited sampling with coordinating support for hygiene Accredited & supervised | Full analysisAccredited sampling with coordinating support for complete water analysis ⚠️ Important notes Valid for one sampling location only. Additional kits required for multiple locations. Laboratory shipping included unless otherwise stated. Coordinating On-site services available separately. 📊 Results & Benefits Laboratory analysis provides detailed measurements and a verifiable assessment of water quality. It serves as a basis for professionals to initiate or maintain technical measures, optimize hygiene, or provide legal documentation. Completely configure supply chains For complete implementation, we recommend booking a coordinating BIM Facility Manager or VDI Hygiene Inspector as a certified professional, typically for 4 days per week (Monday to Thursday). Note: This offer is not all-inclusive. Travel expenses and equipment are not included and can be booked optionally in the categories BIMconnect, BIMpilot, or BIMservice.

€95.00*

Tip

BIMdepot | Surface Sampling Kit AGAR - Plus Lab Analysis

Language Version: German | Task - Sampling Service : Direct | biologically

BIMdepot contact and swab sampling set for surface analysis professionals: Includes 5 round agar plates in Petri dishes and 5 swabs for surface sampling – ideal for air filters, condensate trays, interior walls, air-handling components, food areas, or refrigeration units. Sample evaluation and report generation (e.g. according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user. Swabs are recommended for hard-to-reach or uneven surfaces. Note: More than 5 samples require additional kits. Microbial and bacterial analysis On TTC agar, most bacteria grow as red colonies – some fungi and yeasts may also appear. Colorless colonies are also counted. The key factor is Colony Forming Units (CFU), not colony size. At high contamination levels, the surface may appear uniformly colored or colorless due to heavy growth. Comparison with a fresh medium helps avoid misinterpretation. Reference values: < 10⁴ CFU/ml = low contamination 10⁴ – 10⁶ CFU/ml = moderate contamination > 10⁶ CFU/ml = high, unacceptable contamination Important notes This analysis kit does not include PPE, on-site sampling, or services. Transport, consulting, action planning & result interpretation are booked separately. Coordinated or extended deployments require separate booking. Create professional supply chains For full process and sampling support, booking a coordinating BIM Facility Manager or VDI hygiene inspector is recommended (Mon–Thu, 4 days/week). Note: Work equipment and travel costs are not included – see BIMconnect, BIMpilot or BIMservice.

€130.90*

Cable routing channel trunking CK 110 x 60 mm 2 m white RAL 9010

Item - Quantity: PU

Cable trunking, cable duct CK 110 x 60 (per 2 m of trunking). Base perforation with a continuous mounting rail for attaching divider rails. Completely overlapping top section (cover) and base perforation. Tunnel length: 2 mMaterial: PVC - Polyvinyl chlorideFlammability: Flame-retardant, self-extinguishing The picture of the product is not binding and may vary form the appearances of delivered item's

Content: 2 lm (€12.90* / 1 lm)

Variants from €13.50*

€25.80*

Cable routing channel trunking LFK 25 x 25 mm 2 m white RAL 9010

Item - Quantity: PU

Cable trunking, cable duct LFK 25 x 25 without retaining clips (per 2 m of trunking). Base perforation up to LFK 40 x 40 is single-row, from LFK 40 x 60 it is double-row. From LFK 60 x 60 with a continuous mounting rail for attaching divider rails. Completely overlapping top section (cover) and base perforation. Tunnel length: 2 mMaterial: PVC - Polyvinyl chlorideFlammability: Flame-retardant, self-extinguishing

Content: 2 lm (€2.82* / 1 lm)

Variants from €3.50*

€5.64*

Cable routing channel trunking LFK 40 x 40 mm 2 m white RAL 9010

Item - Quantity: PU

Cable trunking, cable duct LFK 40 x 40 without retaining clips (per 2 m of trunking). Base perforation up to LFK 40 x 40 is single-row, from LFK 40 x 60 it is double-row. From LFK 60 x 60 with a continuous mounting rail for attaching divider rails. Completely overlapping top section (cover) and base perforation. Tunnel length: 2 mMaterial: PVC - Polyvinyl chlorideFlammability: Flame-retardant, self-extinguishing

Content: 2 lm (€3.97* / 1 lm)

Variants from €4.50*

€7.94*

Cable routing channel trunking LFK 60 x 90 mm 2 m white RAL 9010

Item - Quantity: PU

Cable trunking, cable duct from LFK 40 x 60 including 4 retaining clips (per 2 m of trunking). Base perforation up to LFK 40 x 40 is single-row, from LFK 40 x 60 it is double-row. From LFK 60 x 60 with a continuous mounting rail for attaching divider rails. Completely overlapping top section (cover) and base perforation. Tunnel length: 2 mMaterial: PVC - Polyvinyl chlorideFlammability: Flame-retardant, self-extinguishing The picture can vary to the appearance of the item delivered and is not binding

Content: 2 lm (€10.54* / 1 lm)

Variants from €12.50*

€21.08*

CE®-GLAS Pocket Filter for FM1500 and FM2000 W/H/L: 874/196/350mm M7/F7/ePM1-60%

CE®-GLAS Pocket Filter, fabricated for Systemair FM1500 and FM2000 air handling unitsTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 874mmHeigth: 196mmFrame: 25mm (galv. steel)Pocket length: 350mmAmount pockets: 8

€303.07*

CE®-POLY Cassettefilter for RV4800 W/H/L: 565/530/96 mm M5/F5/ePM10-50%

CE®-POLY Z-Line Insert Filter in a cardboard frame, specially manufactured for SYSTEMAIR RV4800 Air Handling Units.Technical Data:Filter Quality: M5/F5/ePM10-50%Width: 565mmHeight: 530mmFrame: 96mm CardboardLength: 96mm

€290.40*

CE®-POLY Cassettefilter for RV4800 W/H/L: 565/530/96 mm M7/F7/ePM1-55%

CE®-POLY Z-Line Insert Filter in a cardboard frame, specially manufactured for SYSTEMAIR RV4800 Air Handling Units.Technical Data:Filter Quality: M7/F7/ePM1-55%Width: 565mmHeight: 530mmFrame: 96mm CardboardLength: 96mm

€484.80*

CE®-POLY Cassettefilter W/H/L: 712/335/48 M4/G4/COARSE-60%

CE®-POLY Z-Line Insert Filter in a cardboard frame, specially manufactured for WOLF KG 15 Air Handling Units.Technical Data:Filter Quality: M4/F4/COARSE-60%Width: 712mmHeight: 335mmFrame: 48mm CardboardLength: 48mm

€66.00*

CE®-TEX Filter Mat Paint-Stop M3/G3/COARSE-45% cut to size

CP®-TEX Paint-Stop M3/G3/COARSE-45% filter media cut to size. The perfect cut to size, as an air filter mat for the paint spray booth. In your paint shop, this custom-fit mat ensures high-quality paint surfaces and a clean workplace without excessive paint overspray. Simply select the number of square meters as the cut size and let us know the exact dimensions in the comments field of your order. The price and shipping costs always refer to whole square meters. Technical specifications: Length: 20m Width: 2000mm Thickness: 50mm Filter grade: EU3/G3/COARSE45%

€17.64*

CE®-TEX Filter Roll EU3/G3/COARSE45%

CP®-TEX EU3/G3 Filtermedium as a rollTechnical Data:Length: 20mWidth: 2000mmThickness: 20mmFilter Quality: EU3/G3/COARSE45%

€540.36*

CE®-TEX Filter Roll EU5/F5/ePM10-55%

CP®-TEX EU5/F5 Filtermedium as a rollTechnical Data:Length: 22 mWidth: 2000 mmThickness: 20 mm

€637.84*

CE®-TEX Pocket Filter W/H/L: 233/233/300mm M7/F7/ePM1-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 233mmHeigth: 233mmFrame: 20mm (galv. steel)Pocket length: 300mmAmount pockets: 3

€140.45*

CE®-TEX Pocket Filter W/H/L: 287/287/200mm M4/G4/COARSE60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M4/G4/COARSE60%Width: 287mmHeight: 287mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€28.94*

CE®-TEX Pocket Filter W/H/L: 287/287/200mm M5/F5/ePM10-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M5/F5/ePM10-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€36.66*

CE®-TEX Pocket Filter W/H/L: 287/287/200mm M6/F6/ePM10-75%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M6/F6/ePM10-75%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€37.68*

CE®-TEX Pocket Filter W/H/L: 287/287/200mm M7/F7/ePM1-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€41.85*

CE®-TEX Pocket Filter W/H/L: 287/287/300mm M4/G4/COARSE60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M4/G4/COARSE60%Width: 287mmHeight: 287mmFrame: 25mmPocket length: 300mmAmount pockets: 3

€33.51*

CE®-TEX Pocket Filter W/H/L: 287/287/300mm M5/F5/ePM10-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M5/F5/ePM10-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 300mmAmount pockets: 3

€38.02*

CE®-TEX Pocket Filter W/H/L: 287/287/300mm M6/F6/ePM10-75%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M6/F6/ePM10-75%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 300mmAmount pockets: 3

€39.07*

CE®-TEX Pocket Filter W/H/L: 287/287/300mm M7/F7/ePM1-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 300mmAmount pockets: 3

€43.30*

CE®-TEX Pocket Filter W/H/L: 287/287/500mm M4/G4/COARSE60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M4/G4/COARSE60%Width: 287mmHeight: 287mmFrame: 25mmPocket length: 500mmAmount pockets: 3

€44.35*

CE®-TEX Pocket Filter W/H/L: 287/287/500mm M5/F5/ePM10-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M5/F5/ePM10-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 500mmAmount pockets: 3

€40.13*

CE®-TEX Pocket Filter W/H/L: 287/287/500mm M6/F6/ePM10-75%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M6/F6/ePM10-75%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 500mmAmount pockets: 3

€43.30*

CE®-TEX Pocket Filter W/H/L: 287/287/500mm M7/F7/ePM1-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 500mmAmount pockets: 3

€47.52*

CE®-TEX Pocket Filter W/H/L: 287/287/600mm M4/G4/COARSE60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M4/G4/COARSE60%Width: 287mmHeight: 287mmFrame: 25mmPocket length: 600mmAmount pockets: 3

€45.41*

CE®-TEX Pocket Filter W/H/L: 287/287/600mm M5/F5/ePM10-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M5/F5/ePM10-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 600mmAmount pockets: 3

€42.24*

CE®-TEX Pocket Filter W/H/L: 287/287/600mm M6/F6/ePM10-75%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M6/F6/ePM10-75%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 600mmAmount pockets: 3

€44.36*

CE®-TEX Pocket Filter W/H/L: 287/287/600mm M7/F7/ePM1-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 287mmHeigth: 287mmFrame: 25mmPocket length: 600mmAmount pockets: 3

€49.63*

CE®-TEX Pocket Filter W/H/L: 287/489/300mm M4/G4/COARSE60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M4/G4/COARSE60%Width: 287mmHeight: 489mmFrame: 25mmPocket length: 300mmAmount pockets: 3

€126.72*

CE®-TEX Pocket Filter W/H/L: 287/489/300mm M5/F5/ePM10-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M5/F5/ePM10-60%Width: 287mmHeight: 489mmFrame: 25mmPocket length: 300mmAmount pockets: 3

€136.22*

CE®-TEX Pocket Filter W/H/L: 287/592/200mm M4/G4/COARSE60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M4/G4/COARSE60%Width: 287mmHeight: 592mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€40.13*

CE®-TEX Pocket Filter W/H/L: 287/592/200mm M5/F5/ePM10-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M5/F5/ePM10-60%Width: 287mmHeight: 592mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€46.46*

CE®-TEX Pocket Filter W/H/L: 287/592/200mm M6/F6/ePM10-75%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M6/F6/ePM10-75%Width: 287mmHeigth: 592mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€50.69*

CE®-TEX Pocket Filter W/H/L: 287/592/200mm M7/F7/ePM1-60%

CE®-TEX Pocket FilterTechnical Data:Filter Quality: M7/F7/ePM1-60%Width: 287mmHeigth: 592mmFrame: 25mmPocket length: 200mmAmount pockets: 3

€53.86*

Products for modern buildings, sustainability and value retention

Everything for Construction and Facility Management

CommercialAir Conditioner

IT PrecisionAir Conditioner

ResidentialAir Conditioner

Technical Gases

Air Filter

Insulation

Sanitary Installation Materials

Installation Materials

Electrical Installation Materials

Overview of this Category for building-related products

Commercial
Air Conditioner

IT Precision
Air Conditioner

Residential
Air Conditioner