Product number:
DE-S3497392
EAN:
9405-1
Product information "Cable routing channel CK 110 x 60 white RAL 9010"
Cable trunking, cable duct CK 110 x 60 (per 2 m of trunking). Base perforation with a continuous mounting rail for attaching divider rails. Completely overlapping top section (cover) and base perforation.
- Tunnel length: 2 m
- Material: PVC - Polyvinyl chloride
- Flammability: Flame-retardant, self-extinguishing
Login
Others also ordered
BIMservice | E&IC Control Technician
€143.00*
Task - E&IC :
IC | DDC adjust parameters/markers
|
Task - Work Location:
Remote
The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective.
How our climate-neutral E&IC Technician works
First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings.
Always fully configure supply chains
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.
Tip
BIMservice | Technical Advice
€143.00*
Task - Work Location:
Remote
Measurement, optimization or consulting? We offer this service on-site or remotely for one hour, tailored to your specific needs.
What are the advantages of a BIMcare™ maintenance contract?
After maintenance is performed under BIMcare™, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned and BIMcare™ is subsequently continued continuously for at least 12 months.
Even without BIMcare™, a cost-effective remote service is available via WhatsApp.
Always configure supply chains completely
This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.
BIMservice | Electrical Technician
€143.00*
Task - E&IC :
E | Analyze cause of fault
|
Task - Work Location:
Remote
The Electrical Engineer for Low-Voltage AC/DC Systems is responsible for the safe, compliant, and efficient installation, commissioning, and verification of smaller electrical systems up to 1000 V DC. This includes photovoltaic systems, DC strings, protection devices, energy storage systems, and all associated control and network infrastructures.
How does the climate-neutral Electrical Engineering Service work?
First, a detailed assessment of all DC and AC components is performed to identify potential failure points and safety-relevant weaknesses. This includes examining PV strings, DC fuses, combiner boxes, cabling, grounding systems, inverters, and energy storage units. Based on this analysis, targeted upgrades, reconfiguration, or replacement of components may be implemented to improve operational reliability and ensure compliance with electrical safety standards up to 1000 V DC.
Furthermore, modern monitoring technologies, including Victron control systems and IoT-based supervision, can be integrated to enable remote diagnostics and performance optimization. In this way, maintenance times are reduced, system uptime is increased, and long-term operational efficiency is achieved. Environmentally friendly and energy-efficient approaches are consistently applied to support carbon-neutral operations.
What is obligation to fully configure supply chains?
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.
Tip
BIMservice | Fault Diagnose Control Technology
€429.00*
Task - E&IC :
IC | Analyze cause of fault
|
Task - Work Location:
Remote
Unknown fault in the control cabinet? We will create a diagnosis within 3 hours to solve the problem.
The advantage of a maintenance contract
After maintenance has been carried out as part of "BIM-Care", we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIM-Care is then continued for at least 12 months without interruption.
Always configure supply chains completely
It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive service, travel costs and work equipment are not included and these can be found under BIMpilot or BIMservice.
Content: 3 Hour/s (€143.00* / 1 Hour/s)
BIMaudit | MEP Appraiser - Damage Assessment
€1,185.00*
1. BIMaudit - Area:
Ventilation technology
|
2. BIMaudit - Concern:
Water damage, burst pipes
|
3. BIMaudit - Purpose:
Legal dispute / preservation of evidence
|
4. BIMaudit - Content:
Cause of Damage & Condition Assessment Scope documented in detail
|
Language Version:
German
|
Task - Work Location:
Remote
Do you have damage to your building's technology?
Whether it's water damage, a heating failure, or a dispute – here you can receive a customised report from an independent building services expert.
1. What is being assessed?
Ventilation technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinet)
Construction contracts & Building Acceptance
️2. Where did damage occur?
💧 Water damage, burst pipes
🔥 Fire damage, short circuit, power surge
🌫️ Mold, indoor air or odors
🧱 Construction defects or construction delays
📉 Loss of value / building damage
🌪️ Natural event (storm, hail, lightning, flood)>
3. What do you need the appraisal for?
⚖️ Legal dispute / preservation of evidence
🕊️ Mediation or out-of-court settlement
🧾 Review of a construction contract
💰 Submission to insurance / claims settlement
4. Which services are required?
Cause of Damage & Condition Assessment Scope documented in detail
Estimation of renovation costs
Repair recommendations
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).