Microgrids for Commercial & Industrial Use – Your Own Energy System

This installation package provides a structured and professional implementation of your Microgrid XS System, including photovoltaic generation, battery storage, and power conversion. The system is delivered as a partially pre-assembled energy infrastructure unit, enabling reduced on-site installation time, improved system consistency, and repeatable deployment across projects. All works are carried out by certified personnel in accordance with applicable technical standards. Installation Requirements Client Responsibilities The client is responsible for ensuring that all areas required for the installation of the microgrid system are fully accessible and suitable for installation works. Any delays, additional costs, or technical adjustments resulting from unmet site requirements or insufficient client-side preparation shall not be the responsibility of the contractor and may be subject to additional charges. Provision of clear and adequate access to all installation areas (roof surfaces, technical areas, and external spaces) Provision of basic site infrastructure, including electrical power supply, water, and sanitary facilities (toilet) for installation personnel Verification and confirmation of the structural integrity and load-bearing capacity of all installation surfaces, in particular roof structures for photovoltaic systems and ground surfaces for system components, containers, and mounting structures Ensuring sufficient load-bearing capacity and stability for scaffolding, lifting equipment, and other installation aids Our Scope of Installation Installation of 9 photovoltaic modules (approx. 2.1 m × 1.0 m each) Installation of pre-assembled Microgrid XS Power Conversion Unit (PCU), including inverter, MPPT charge controller, protection devices, busbar system, and internal wiring Installation and connection of LiFePO₄ battery system including DC busbar integration DC cabling, string combiner integration, and system wiring AC integration into existing electrical distribution (standard low-voltage connection, excluding modifications to main distribution board) Installation and integration of 2-way smart meter (subject to local grid operator approval and regulatory requirements) Scope of Services Mechanical Installation: Roof mounting system, module installation, alignment, and structural fixing Electrical Installation (DC & AC): Stringing, cabling, combiner integration, PCU connection, and protection devices Energy System Integration: Inverter configuration, battery integration, and MPPT setup Monitoring & Control: Smart meter integration and basic system monitoring configuration Commissioning: Testing, parameterization, and documented handover in operational condition Execution Model: Installation is performed within a defined execution window. Continuous on-site presence is not guaranteed and depends on project phase and workflow optimization Installation Cost Breakdown Position Description Price (€) 1. Mechanical Installation 6 days (2 technicians) – Roof mounting system, PV module installation, structural fixing and alignment 5,440 € 2. Electrical Installation (DC & AC) 3 days (2 technicians) – Internal system wiring, PCU integration, protection and grid connection 2,720 € 3. Energy System Commissioning 2 days (2 technicians) – Inverter setup, battery integration, MPPT configuration, smart meter, internal data network, monitoring setup 1,813 € 4. Logistics & Travel Mobilization, travel costs (up to 300 km), accommodation, tools and consumables 1,470 € 5. Site Equipment PPE provision; scaffolding included in system calculation 250 € Total Installation Cost: 11,693 € The above pricing is based on an estimated total installation effort of approximately 170–190 man-hours, calculated on the basis of a two-person installation team (8-hour workdays). Additional Services (Not Included) Modifications to existing electrical infrastructure (e.g. main distribution board, earthing upgrades) Grid connection approval processes or utility coordination Additional travel or extended mobilization beyond defined scope Delays or additional work due to missing site readiness or access restrictions Special construction works (core drilling, structural modifications, piping adjustments) Integration into external systems (WiFi, KNX, advanced EMS) Provision of heavy equipment (cranes, lifts beyond standard scope) Construction and finishing works (masonry, painting, structural adaptations) Right of Withdrawal (EU Consumers) Consumers have the statutory right of withdrawal in accordance with applicable consumer protection laws. Early Expiry of the Right of Withdrawal: The right of withdrawal may expire prematurely if the customer expressly requests that the service begins before the end of the withdrawal period and acknowledges that the right of withdrawal is lost once the service has been fully performed. Individually Configured Systems: For system components that are individually configured, pre-assembled, or tailored to customer specifications, the right of withdrawal may be excluded where legally permitted. Project Scheduling: Installation dates are scheduled after order confirmation within a defined execution window. If performance cannot be carried out due to reasons attributable to the customer (e.g. lack of access or missing prerequisites), additional costs may apply. This structured approach ensures a transparent, efficient, and technically compliant installation with clearly defined responsibilities and cost allocation.

The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology. The advantages with BIM Facility Manager Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology. How BIM Facility Managers work with buildings In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager. Where maintenance contracts are offered This can be found under the category BIMcare™. Always fully configure supply chains The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.

Next-Generation Smart EV Charging Solution The EV Charge Pro NS is a high-performance AC charging station designed for flexible single- and three-phase operation. It delivers up to 22 kW in three-phase mode or 7.3 kW in single-phase mode, making it ideal for residential, commercial, and energy-integrated applications. Modern design without LCD – fully digital control The NS version removes the built-in display and relies on a fully digital interface via VictronConnect (Bluetooth) and web access through WiFi or access point mode. This results in a clean hardware design with maximum operational flexibility. Full energy system integration The charger integrates seamlessly with Victron Energy GX devices and the VRM monitoring platform. When combined with solar PV systems within the Victron ecosystem, excess solar energy can be used directly to charge your EV. Flexible charging modes Solar surplus charging mode Manual charging mode Scheduled charging based on energy demand Real-time status indication A fully programmable RGB light ring around the charging port visually indicates system status such as disconnected, charging, or fully charged for instant recognition. Key features Up to 22 kW AC charging (three-phase) 7.3 kW single-phase operation No LCD – app & web-based control Victron GX & VRM compatible Solar surplus charging support RGB status light ring Available in 3 modern color options Ideal for: Residential homes, commercial buildings, fleet operators, and PV-integrated energy systems.