BIMservice | E&IC Control Technician
Product number:
DK-ZT900101.19
Product information " BIMservice | E&IC Control Technician"
The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective.
How our climate-neutral E&IC Technician works
First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings.
Always fully configure supply chains
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.
Login
Service Configuration for On-Site Operations
Booking a service covers the on-site labour only. Depending on the operational conditions, additional tools and materials from BIMdepot™ as well as a mobility solution via BIMconnect™ may be required to ensure a smooth execution.
The exact configuration depends on the type of assignment, location and available resources at the customer’s site.
Others also ordered
BIMconnect | Business trip in Western Cape
€20.00*
Your next Service-Hub:
ZA|George 20/40 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain.
It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort.
Your Advantage: A Sustainable Supply Chain Without Additional Effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Plannable operations without additional coordination effort
Charging Times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €0.50*
BIMconnect | Business trip Germany-Spain
€5,809.00*
Your next Service-Hub:
DE|Essen > ES|Barcelona 1570/3140 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
BIMconnect | Business trip Germany-Italy
€3,293.00*
Your next Service-Hub:
DE|Essen > IT|Milan 890/1780 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
BIMconnect | Business trip Germany-France
€3,219.00*
Your next Service-Hub:
DE|Essen > FR|Mauvieres 870/1740 km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
BIMconnect | Business trip Denmark-France
€5,402.00*
Your next Service-Hub:
DK|Ribe > FR|Mauvieres 1460/2920 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
BIMconnect | Business trip Denmark-Spain
€7,992.00*
Your next Service-Hub:
DK|Ribe > ES|Barcelona 2160/4320 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
BIMconnect | Business trip in Denmark
€73.95*
Your next Service-Hub:
DK|Ribe 20/40 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain.
It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort.
Your Advantage: A Sustainable Supply Chain Without Additional Effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Plannable operations without additional coordination effort
Charging Times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
BIMconnect | Business trip Denmark-Austria
€4,366.00*
Your next Service-Hub:
DK|Ribe > AT|Linz 1180/2360 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
Rental product
BIMdepot | Operational Personal Protective Equipment - Climbing
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This personal protective equipment, consisting of a fall arrest harness and accessories, is used by our technician for professional inspection, supervision, work, installation and positioning on roofs or during work at height, mainly on façades, roofs, access balconies, balconies, balustrades or industrial facilities. Anything that cannot be reached safely or economically usually requires the use of a suitable lifting platform or aerial work platform.
For various tasks, we additionally recommend the following equipment:
If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with Regulation 303/2008 on chemicals and climate protection and Implementing Regulation (EU) 2015/2066.
€15.00*
Rental product
BIMdepot | Operational Leak Scanner Refrigeration
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This leak scanner is used by our technicians for assessments, leak testing and environmental important measures and documentation on refrigeration cycless.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€25.00*
Rental product
BIMdepot | Operational Refrigerant Pressure Gauge
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This aid as a pressure gauge battery is used by our technicians for all work on refrigeration circuits and air conditioning systems.
For various tasks, we also recommend the following equipment:
Nitrogen nitrogen gas bottle for pressure tests
Refrigerant scale for collection or disposal
Vacuum pump before recommissioning
In addition to fresh refrigerant, there is much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€28.00*
Rental product
BIMdepot | Operational Vacuum Pump
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This vacuum pump is used by our technicians to evacuate each refrigerant cycle once new installed for commissioning or after replacement of fitted appliances.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€35.00*
Rental product
BIMdepot | Operational Refrigerant Scale
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This scale is used by our technicians to accurately measure the amount of refrigerant during both filling and disposal processes.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Vacuum pump after pressure testing
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€38.00*
Rental product
BIMdepot | Operational Hand Pallet Truck
BIMdepot Filter:
Construction Technology
|
Task - Duration:
1 Week
|
Task - Work Location:
DE - From Essen
This pallet truck is used by our technician for the proper movement and positioning of heavy or bulky pallet goods, especially IBC containment trays or packaged equipment or parts. The maximum load capacity is 2200 kg, which can only be achieved on flat, smooth and load-bearing surfaces.
For various tasks we additionally recommend the following equipment:
If this item is listed in your sales channel as a rental product, shipment should generally be carried out using the Coolenvi™ service vehicle. Please note that these leased items cannot be shipped by air freight for logistical reasons. If you are located on an island or outside the country, please check shipping methods and equipment availability in advance to avoid delays. Coolenvi™ is a certified specialist company for sustainable services in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.
€60.00*
Rental product
BIMdepot | Operational Hose Trolley 20m
BIMdepot Filter:
Potable Water Technology
|
Task - AHU:
ME | Installation Heat Exchanger
|
Task - Duration:
1 Week
|
Task - PW:
PW - Glycol Brine Recycling Disposal
|
Task - Work Location:
DE - From Essen
The Hose Trolley is a strong and resilient hose for rental use. Itt supports in different environments to fill or discharge variants of technical facilities only if they containt non-hazardous water based media. This Set provides also a standard couple adapter from 3/4 inch to 1/2" connectors.
Diameter: 1/2"
Length: 20 m
Sustainability & Service:
Cleaning after use is included in the rental price. Optional return logistics are available.
Recommended accessories:
Extraction pump
Mixing tank for glycol preparation
Manual filling pump station
Leak test equipment and sealing accessories
If listed as a rental item in your distribution channel, the product is typically shipped via a dedicated service logistics system. Air freight is not permitted for these rental items. For island or overseas operations, shipping feasibility must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.
€65.00*
Rental product
BIMdepot | Operational Air Volume Measuring Device
BIMdepot Filter:
Air Handling Technology
|
Task - Work Location:
DE - From Essen
This measuring device is used by our technicians to measure air flow at air vents and in air ducts.
We also recommend the following equipment for various tasks:
Air quality meter
Sound level meter
Smoke test sticks
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
€66.00*
Rental product
BIMdepot | Operational Wet & Dry Vacuum Cleaner Industrial
BIMdepot Filter:
Construction Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
High-performance wet and dry vacuum cleaner for rental and operational use. Designed for efficient removal of water, sludge, and construction debris on building sites and technical installations.
A robust solution for demanding cleaning tasks where high suction power and operational reliability are essential.
€69.00*
Rental product
BIMdepot | Operational Nitrogen Pressure Reducer
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This pressure reducer is used by our technicians for commissioning, leak testing and soldering work on refrigeration systems.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€15.00*
Tip
BIMdepot | Potable Water Sampling Kit - Plus Lab Analysis
€95.00*
Task - Sampling Service :
Direct | biologically
The BIMdepot drinking water test kit enables professional sampling and laboratory analysis of drinking water at one defined sample-taking point. Samples are collected in certified containers and sent to an accredited laboratory for analysis and evaluation.
The results provide a reliable basis for assessing water quality and potential contamination from chemical or biological parameters. Sampling and evaluation should be performed by qualified professionals.
🔬 Analysis scope
Depending on the selected variant, the following parameters are analyzed:
Chemical parameters: Lead (Pb), Nickel (Ni), Copper (Cu)
Biological parameters:
Coliform bacteria,
Enterococci,
Pseudomonas aeruginosa,
Legionella
📦 Variant overview
Direct | Heavy metals & chemistrySelf-sampling for chemical analysis
Direct | Bacteria & microbiologySelf-sampling for microbiological testing
Direct | Full analysisSelf-sampling for combined chemical and biological analysis
Accredited & supervised | Heavy metals & chemistryAccredited sampling with coordinating support for heavy metals
Accredited & supervised | Bacteria & microbiologyAccredited sampling with coordinating support for hygiene
Accredited & supervised | Full analysisAccredited sampling with coordinating support for complete water analysis
⚠️ Important notes
Valid for one sampling location only.
Additional kits required for multiple locations.
Laboratory shipping included unless otherwise stated.
Coordinating On-site services available separately.
📊 Results & Benefits
Laboratory analysis provides detailed measurements and a verifiable assessment of water quality. It serves as a basis for professionals to initiate or maintain technical measures, optimize hygiene, or provide legal documentation.
Completely configure supply chains
For complete implementation, we recommend booking a coordinating BIM Facility Manager or VDI Hygiene Inspector as a certified professional, typically for 4 days per week (Monday to Thursday).
Note: This offer is not all-inclusive. Travel expenses and equipment are not included and can be booked optionally in the categories BIMconnect, BIMpilot, or BIMservice.
Rental product
BIMdepot | Operational Installation Tester IEC 60364-6/EN 50110
BIMdepot Filter:
Electrical engineering
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
The testing device is used by our technicians to check installation while commissioning or even if in operation to ensure the cleanest supply of electricity for your demand, including electromagnetic compliance.
We also recommend the following equipment for various tasks:
Appliance Tester
Cable Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
€105.00*
Rental product
BIMdepot | Operational Pressure & Leak Testing Unit - Gas & Water
BIMdepot Filter:
Potable Water Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This professional pressure and leak testing system is an all-in-one solution for compliant testing of gas, LPG, water and wastewater pipelines. The unit enables fully automated test sequences and combines measurement, testing and documentation in one compact system.
Technical & Functional Features
Suitable for gas, LPG, water and wastewater lines
Test range up to 20 bar
Integrated compressor for automatic pressure build-up up to 1.5 bar
Automated test sequences for repeatable results
DVGW-certified testing methodology
Integrated pressure and leakage measurement
Documentation & Process Reliability
The system includes a built-in printer for on-site documentation of all test procedures. Test reports are generated instantly and stored in a revision-safe manner, ensuring compliant workflows on site.
Application Benefits
The all-in-one solution reduces setup time, minimizes error sources and enables safe pressure and leak testing. Automated processes simplify operation and significantly improve process quality.
Scope of Delivery
Pressure and leak testing device with integrated compressor, printer unit and system-relevant accessories according to configuration.
Use exclusively within BIMdepot rental conditions and by appropriately qualified professionals.
If listed as a rental item, it must generally be shipped with the Coolenvi™ service vehicle. Air freight is not permitted due to logistical restrictions. For island or overseas deployments, please verify shipping method and availability in advance. Coolenvi is a certified specialist company in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.
€115.00*
Tip
BIMconnect | Overnight stay Accommodation - Travel expenses
€120.00*
Task - Work Location:
DE - From Essen
If our staff is required on site, please also book the corresponding accommodation costs together with other BIM packages.
Choose according to the defined location
This accommodation package is valid for one person. It is provided as part of BIM Facility Management, BIMcare™, BIMservice™ or BIM-Management depending on route planning, seasonal requirements or urgency. Please note that this package must be booked on a daily basis and in line with the order:
In the event of deviations, subsequent bookings are required before the contract is concluded, as no one should sleep on the street and we attach great importance to an optimal working atmosphere.
If the employees work more than 4 days per week, overnight accommodation must be booked according to the daily flat rate, including at weekends.
If the duration of the business trip or the travel times are not sufficient, weekends must be considered as standby time, but must be booked separately by the customer and at their own expense.
Fully configure supply chains
Ideally, a booking of 4 days per week, Monday to Thursday, is recommended. Please note that this is not an all-inclusive offer. Travel costs and work equipment are not included and can be found under BIMpilot™ or BIMservice™.
Rental product
BIMdepot | Operational Safety Tester DIN VDE 0701/0702
BIMdepot Filter:
Electrical engineering
|
Task - Work Location:
DE - From Essen
The testing device is used by our technicians to regularly check office and household appliances for electrical safety.
We also recommend the following equipment for various tasks:
Installation Tester
Cable Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
€120.00*
Tip
BIMdepot | Surface Sampling Kit AGAR - Plus Lab Analysis
€130.90*
Language Version:
German
|
Task - Sampling Service :
Direct | biologically
BIMdepot contact and swab sampling set for surface analysis professionals: Includes 5 round agar plates in Petri dishes and 5 swabs for surface sampling – ideal for air filters, condensate trays, interior walls, air-handling components, food areas, or refrigeration units. Sample evaluation and report generation (e.g. according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user. Swabs are recommended for hard-to-reach or uneven surfaces.
Note: More than 5 samples require additional kits.
Microbial and bacterial analysis
On TTC agar, most bacteria grow as red colonies – some fungi and yeasts may also appear. Colorless colonies are also counted. The key factor is Colony Forming Units (CFU), not colony size. At high contamination levels, the surface may appear uniformly colored or colorless due to heavy growth. Comparison with a fresh medium helps avoid misinterpretation.
Reference values:
< 10⁴ CFU/ml = low contamination
10⁴ – 10⁶ CFU/ml = moderate contamination
> 10⁶ CFU/ml = high, unacceptable contamination
Important notes
This analysis kit does not include PPE, on-site sampling, or services.
Transport, consulting, action planning & result interpretation are booked separately.
Coordinated or extended deployments require separate booking.
Create professional supply chains
For full process and sampling support, booking a coordinating BIM Facility Manager or VDI hygiene inspector is recommended (Mon–Thu, 4 days/week).
Note: Work equipment and travel costs are not included – see BIMconnect, BIMpilot or BIMservice.
Rental product
BIMdepot | Operational Super-Assembly Lift
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This super assembly lift is used by our technician as a platform carrier for the professional installation of various system components, particularly HVAC and ventilation equipment beneath unfinished ceilings. The standard lifting height is up to 3.80 m. For installing heavier loads on façades, an additional fork lift with a lifting height of up to 2.51 m is available. For working heights exceeding 2 m, we generally recommend ordering suitable scaffolding.
For various tasks, we additionally recommend the following equipment:
If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€150.00*
Rental product
BIMdepot | Operational Pipe Freezing Unit Turbo R290 SET
BIMdepot Filter:
Potable Water Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This professional pipe freezing unit enables controlled freezing of heating and water pipes for maintenance and installation work without fully draining the system. The unit operates with R290 refrigerant and is available in the 1.1/4" version (2" optional), allowing certified Coolenvi™ technicians to cover a wide range of applications.
Technical & Functional Features
Suitable for heating and potable water lines
Enables safe work without system shutdown
Flexible hose design for improved mobility
Slim clamp construction for tight installation areas
Digital support indicating minimum freezing time
Efficient and resource-saving operation
Application Benefits
The system supports forward-looking, economical and environmentally conscious installation processes. Its optimized design makes it ideal for restricted access environments. The digital time calculation enhances process reliability and planning accuracy.
Scope of Delivery
Freezing unit according to set configuration, hose system, clamp components and operational accessories.
If listed as a rental item in your sales channel, it must generally be shipped together with the Coolenvi™ service vehicle. Due to logistical restrictions, air freight is not permitted. For island or overseas deployments, please verify shipping method and availability in advance. Coolenvi is a certified specialist company in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.
€155.00*
Rental product
BIMdepot | Operational Infrared Camera
BIMdepot Filter:
Air Handling Technology
|
Task - Work Location:
DE - From Essen
This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads.
For various tasks, we also recommend the following equipment:
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
€162.00*
Rental product
BIMdepot | Operational Sole Filling Pump
BIMdepot Filter:
Potable Water Technology
|
Task - Duration:
1 Week
|
Task - Work Location:
DE - From Essen
The electric filling pump for glycol brines and water-based heat transfer fluids
is a compact and powerful solution for fast filling of heating, solar, and heat pump systems.
It is designed for professional use by certified contractors.
The pump is suitable for water and water-like, non-flammable fluids.
Use with oils, fuels, or other flammable liquids is not permitted.
Technical data
Power supply230 V mains operation
Power consumption800 W
Flow rateup to 3,300 l/h
Max head46 m
Suction height9 m
MaterialStainless steel housing
Dimensions (L × W × H)29.5 × 37 × 29 cm
Weight8.1 kg
Delivery scope
Electric filling pump
4 m suction hose with foot valve and filter screen
Application notes
Filling and flushing of closed-loop systems
Not suitable for continuous circulation operation
Suitable for water and glycol-water mixtures
Thorough cleaning required after use with brine media
Self-priming design for mobile use
Description
The electric filling pump enables efficient and reliable filling of heating, solar, and heat pump systems.
Its compact design allows flexible mobile use on construction sites and during maintenance work.
Recommended accessories
IBC collection tank
Pressure hoses for pump outlet
Transport solutions for glycol brines
Pressure testing equipment before filling
Antifrogen L and compatible fluids
Shipping and usage notes
If offered as a rental item, shipping is typically carried out together with a service vehicle.
Due to logistical and transport restrictions, air freight is not available.
For island or non-mainland locations, transport feasibility must be verified in advance.
BIMdepot is a certified technical provider in accordance with European chemical and climate protection regulations,
including Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.
When handling glycol brines, water protection regulations must be observed to protect soil and groundwater.
€165.00*
BIMconnect | Business trip Denmark-Germany
€185.00*
Your next Service-Hub:
DK|Ribe > DE|Süderlügum 50/100 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
Rental product
BIMdepot | Operational Recycling Glycol Brine IBC 600 L
BIMdepot Filter:
Potable Water Technology
|
Task - Duration:
1 Week
|
Task - PW:
PW - Glycol Brine Storage Refill
|
Task - Work Location:
DE - From Essen
The IBC container 600 L (REKO) is a reconditioned industrial container for rental use for safe storage, mixing and internal handling of glycol solutions. In particular, Antifrogen type N is classified as dangerous goods and must under no circumstances be disposed of via public sewage systems or by contaminating groundwater.
Use is exclusively intended for compatible, non-hazardous media. Not suitable for acids, highly aggressive chemicals or other hazardous substances. The container must be cleaned by the lessee prior to return or can optionally be processed via a recycling concept including disposal costs. Transport costs are not included and can optionally be booked via BIMconnect™.
Sustainability & Service:
The inner container is made of HDPE (transparent/natural) and allows easy and safe level monitoring. A stable steel grid frame ensures mechanical durability in daily use, while the robust plastic pallet enables flexible internal transport with pallet trucks or forklifts.
Volume: 600 litres
Inner container material: HDPE
Pallet: plastic, forklift accessible
Filling opening: 225 mm
Outlet valve: 2" sliding valve DN50
Outlet coupling: 3/4" valve with hose connection
Dimensions: 1200 × 800 × 1013 mm
Condition: REKO (cleaned, inspected)
Approval: no UN dangerous goods approval
For different applications we also recommend:
Antifrogen L - antifreeze fluid
Extraction pump
Hose trolley
Mixing tank for glycol preparation
Manual pressure filling pump station
Leak test station, sealing compounds and additional accessories
If the item is listed as a rental product in your distribution channel, it is typically shipped together with the Coolenvi™ service vehicle. Please note that due to logistical restrictions these rental items cannot be shipped by air freight. For island or overseas operations, shipping feasibility and availability must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.
€215.00*
Rental product
BIMdepot | Operational Core Drilling Machine Set - Concrete & Masonry
BIMdepot Filter:
Construction Technology
|
Task - Core Drilling:
68 mm
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
The core drilling machine set is a reliable tool for installation work in rental and operational use. Core drilling in concrete and masonry up to a wall thickness of 350 mm is possible, enabling a wide range of technical installations. The set includes selectable standard diamond core drill bits in sizes 60, 80, 100, 120, 200, 250, and 300 mm. A 230 V power supply and a water connection must be provided on site. A manual pressure pump for cooling and flushing water is included in the set.
Sustainability & Service:
Cleaning after use is included in the rental price. Optional logistics services are available.
Recommended accessories:
Wet vacuum cleaner
Protective covers
Anchor dowels
Worksite equipment
If the item is listed as a rental product in your distribution channel, it is typically shipped together with the Coolenvi™ service vehicle. Please note that due to logistical restrictions these rental items cannot be shipped by air freight. For island or overseas operations, shipping feasibility and availability must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.
€220.00*
Rental product
BIMdepot | Operational Disposal Station Refrigerants
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This condenser station is used by our technician to recover, dispose of or collect refrigerant gases.
For various tasks, we also recommend the following equipment:
Recycled bottles for storage or disposal
Refrigeration fitting suitable for the refrigerant gas
Refrigerant scale for documentation of recorded gas quantities
Nitrogen Nitrogen for pressure testing before filling
Much more is needed to refill...
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
€265.00*
Rental product
BIMdepot | Operational Battery Pipe Pressing Tool SET
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Week
|
Task - Work Location:
DE - From Essen
The set is based on an electro-hydraulic, radial pressing machine and is designed for system-compliant pressing of professional piping systems.
This rental equipment is exclusively available to our certified Coolenvi™ technicians.
Technical Performance Features
Suitable for metal, plastic, and multilayer composite systems
System-dependent application up to Ø 110 mm
Pressing force: 32–34 kN
Press cycle: approx. 5 seconds
Constant Force Technology (CFT) ensures consistent pressing force throughout the entire cycle
Service interval: 40,000 press cycles / 2 years
Ergonomics & Efficiency
With a weight of only 3.6 kg and optimized weight distribution,
the tool enables ergonomic and low-fatigue operation — even during extended use.
The energy-efficient design supports productive on-site workflows.
Scope of Delivery
Press machine, 4Ah battery, system-relevant components according to the set configuration.
If the item is listed as a rental product in your sales channel, it must generally be shipped together with the Coolenvi service vehicle.
Please note that due to logistical restrictions, these rental items cannot be shipped by air freight.
If your deployment location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays.
Coolenvi is a certified specialist company for sustainable service in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.
€295.00*
BIMconnect | Business trip in Germany
€74.00*
Your next Service-Hub:
DE|Essen 20/40 km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
Rental product
BIMdepot | Operational Fork-Lift
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This fork lift is used by our technician for the professional installation and positioning of heavy or bulky system components, particularly on façades or in ground-level outdoor areas. The maximum lifting height is 2.52 m. Installation tasks that cannot be safely or economically reached with this lift generally require the use of a suitable mobile crane.
For various tasks, we additionally recommend the following equipment:
If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€368.00*
Rental product
BIMdepot | Operational Mobile Scaffolding
BIMdepot Filter:
Air Handling Technology
|
Task - Duration:
1 Day
|
Task - Work Location:
DE - From Essen
This mobile scaffold is used by our technician for the professional installation of various system components, most commonly on façades, hard-to-access areas, or roof sections.
For various tasks, we additionally recommend the following equipment:
If the item is listed as a rental product in your sales channel, it should normally be shipped with the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company in the field of sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
€512.00*
Rental product
BIMdepot | Operational Air Quality Measuring Device
BIMdepot Filter:
Air Handling Technology
|
Task - Work Location:
DE - From Essen
This measuring device is used by our technicians to measure quality and air flow in workplaces.
We also recommend the following equipment for various tasks:
Air flow meter
Sound level meter
Smoke tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
€737.80*
Tip
Rental product
BIMdepot | Operational Indoor Air Comprehensive Sampling Kit – Plus Lab Analysis
BIMdepot Filter:
Air Handling Technology
|
Language Version:
German
|
Task - Sampling Service :
Direct | chemically & biologically
This sampling kit is used for structured detection of key indoor pollutant groups and forms the basis for comprehensive laboratory analysis of indoor air quality in residential, office, and work environments without a known single source.
The product includes sampling technology and laboratory analysis only. On-site sampling, coordination, assessment, or report preparation is not part of the scope of delivery.
Analytical parameters
Formaldehyde from wood-based materials and furniture
Wood preservatives (e.g. PCP, Lindane, DDT, PCB, Chlorthalonil, Endosulfans)
Moulds and yeasts (including non-visible contamination)
VOC & solvents (e.g. benzene, toluene, alcohols, aldehydes, ketones)
Plasticisers (e.g. DEP, DIBP, DBP, BBP, DEHP)
Asbestos fibres (optional fibre analysis using specialised methods)
Sampling principle
Air samples are collected using a leased electronic sampling pump onto adsorption tubes. Sampling is standardised and designed for rooms up to approx. 100 m². Additionally, mould detection is carried out using sedimentation methods including an outdoor air reference sample.
Laboratory analysis
Gas chromatographic VOC analysis according to VDI-oriented procedures
Scanning electron microscopy fibre analysis (e.g. SEM/EDX in case of asbestos suspicion)
Microbiological testing (moulds & yeasts)
Comparison with guideline and assessment values
Evaluation (separately defined service scope)
Laboratory report with structured measurement data - included
Technical evaluation of results - optional
Optional cause and mitigation interpretation by specialist bodies - optional
Scope of delivery
General:
Laboratory analysis of all commissioned parameters
Standardised result documentation
Indoor air adsorption sampling:
Complete sampling kit incl. leased sampling pump
Special adsorption tubes for VOC, PAHs, formaldehyde, solvents
Mould detection (indoor air)
Culture media in dishes for two rooms
Culture media for outdoor air reference sample
Asbestos and mineral fibre detection
Surface imprint sample on a specialised sampling carrier
Note
Leased sampling pump is included in delivery
Overdue return may incur additional charges
Results are for technical assessment only and do not replace medical diagnosis
BIMdepot™ process logic
For structured project workflows, the involvement of a BIM Facility Manager or a VDI Hygiene Inspector as a qualified indoor air specialist is recommended. Laboratory analyses are performed independently by specialised analysis partners.
€956.80*
BIMconnect | Business trip Denmark-Netherlands
€2,146.00*
Your next Service-Hub:
DK|Ribe > NL|Winterswijk 580/1160 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
BIMconnect | International Air Freight Logistic
€2,620.00*
BIMpilot - International Air Freight Logistic:
Billund - Cape Town / 1 Person / 0 Kg 💚 1.28 t CO₂ ~ 76.98 €
Our sustainable and customer-friendly solution enables the safe and efficient transport of people and permitted goods on international flight routes and within Europe. We combine speed, environmental responsibility, and legal certainty for your transport needs.
What we transport
Specialists for assignments at the destination
Permitted goods, spare parts, and documents
Other non-perishable, non-hazardous goods compliant with international aviation regulations
What we do not transport
For safety and legal reasons, we cannot transport the following goods:
Animals of any kind
Chilled or frozen goods
Hazardous or legally prohibited goods
Batteries (e.g. LiFePO4) or other lithium batteries in large quantities
Liquids exceeding permitted air transport limits
Gases, pressure containers, or compressed substances
Explosive, flammable, or chemically aggressive substances
Other goods prohibited under international aviation or safety regulations
Customer notice: Pickup at destination
Our service exclusively includes, depending on the option, national or international air transport. Delivery within the destination country or domestic transport at the destination is not included. The customer must collect the goods at the destination unless local transport has been booked. Freight is only transported from our warehouse on one route. Mobility at the destination, storage, parking, transfer, and accommodation costs are optional and must be borne and arranged by the customer. The total price depends on the selected options.
Your advantage
Fast and predictable availability of specialists and goods
Sustainable, efficient, and legally compliant execution
English as the business language for international operations
Total price composition
Description
Price in EUR excl. VAT
1. Mobility at departure location - no Km
200.00
2. Mobility at destination - no Km
200.00
3. Non-EU round-trip ticket per person
2,100.00
4. EU round-trip ticket per person
300.00
5. One-way surcharge per 31 kg freight
300.00
6. Parking / transfer costs per location per vehicle/month if required
150.00
7. Overnight stay per night / person
120.00
Variants from €758.40*
BIMconnect | Business trip Denmark-Italy
€4,995.00*
Your next Service-Hub:
DK|Ribe > IT|Milan 1350/2700 Km
The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort.
Your advantage: Sustainable supply chain without additional effort
Each journey is carried out as part of a climate-friendly overall concept. You benefit from:
Support in meeting ESG and sustainability requirements
Reduction of CO₂ emissions within your supply chain
Transparent integration into your environmental and compliance strategy
Predictable deployment times without additional coordination
Charging times (approx. 25 kWh / 100 km)
Distance
AC 3.7 kW
AC 7.4 kW
DC 100 kW
Route
Total
~22 h (0–100%)
~11 h (0–100%)
~40 min (0–100%)
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51–100 km
200 km
14 h
7 h
0:50 h
101–150 km
300 km
20 h
10:30 h
1 h
151–200 km
400 km
26:40 h
14 h
1:30 h
201–250 km
500 km
33:30 h
18 h
2 h
251–300 km
600 km
40 h
21 h
2:30 h
301–500 km
1000 km
67 h
35 h
4 h
501–600 km
1200 km
80 h
41:30 h
4:30 h
601–800 km
1600 km
107 h
55 h
5:30 h
801–1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*