New
ASPEN Condensate Pump PERI – Replacement Hose MS-1633
€31.80*
Original MS-1633 replacement hose for peristaltic kneading pumps of the ASPEN Condensate Pump PERI. Easy swap, reliable performance, durable spare part.
New
ASPEN Condensate Pump PERI PRO+
€462.00*
The new Peri Pro+ is a float-operated condensate pump offering exceptional reliability with an industry-leading 5-year warranty*. Based on stepper motor technology and software control, this version features intelligent pumping technology similar to the latest mini-pumps – always with the goal of minimizing noise and hose wear.
The Peri Pro+ is ideally suited for split systems with high walls, ducted units, and floor-standing and chassis units. It's perfect for hotel rooms and other remote installation locations.
*Hose not included and subject to proper installation and operation.
New
ASPEN Condensate Pump Silent+ Mini Lime Slimline – Signal White
€179.00*
The new and improved 5th generation Silent+ Mini Lime is the quietest corner duct pump on the market at just 16 dB(A). Quick, easy, and flexible to install with proven technology, high flow performance, and low power consumption. Maximum performance, high reliability, and energy efficiency at near-silent operation.
Ideal for comfort and commercial areas where low noise is critical.
Features:
Backward-compatible Plug & Play cable
Compatible with all common duct systems
Fast installation – no vibration damper or anti-siphon valve required
Flow rate up to 40 l/h with up to 10x lower power consumption
Suitable up to 46 kW / 157000 Btu/h
Vibration damper for quiet operation
Pump can be installed in duct angle, left or right
Various duct systems available
Easy maintenance
Included:
Silent+ Mini Lime pump with 1.5 m fixed power cable
Construction with vibration damper and backflow protection
500 mm inlet hose (14 mm ID)
40 mm PVC vent hose (6 mm ID)
Pump angle
800 mm straight duct (not for OEM)
Seal and ceiling penetration
Inlet adapter
Mounting kit
Installation manual
Coolenvi™ - Mounting SET 10m I/O Comfort Devices
€803.87*
Item - Connection Length:
10m
|
Item - Installation SET Variant:
For Facades up to 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 10 m control cable 5 x 1.5 mm
DE-WU097366090 – 10 m cable duct 60 x 90 mm, white
DE-HS760002001 – 10 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 10m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
Coolenvi™ - Mounting SET 10m I/O Commercial Devices
€929.85*
Item - Connection Length:
10m
|
Item - Installation SET Variant:
For Facades 3.6 - 14.0 kW
Installation set for small and large split air conditioning systems, primarily for commercial use, consisting of the following components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick connectors
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x white acrylic sealant – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 12x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 10 m control cable 5 x 1.5 mm
DE-WU097366090 – 10 m cable duct 60 x 90 mm, white
DE-HS760002001 – 10 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 30x TX screws 4.5x60 mm
DE-WU590620635 – 32x wall plugs 6 mm
DE-WU0176203535 – 2x TX screws 3x35 mm
DE-S321.4016 – 10 m CU double pipe 10, 16 mm insulated
DE-S282.0541 – 2x solder fittings 10 mm
DE-S282.0543 – 2x solder fittings 16 mm
1x nitrogen soldering gas (flat rate) content, sealant
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support beams 45°
DE-WU0862005326 – 2x holding clamp M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x body washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof installation:
DE-LIN1229000 - 1x SET roof support beams 1000 mm
DE-WU071392915 – 2x construction site protective mats (strips)
Variants from €886.00*
Coolenvi™ - Mounting SET 15m I/O Comfort Devices
€1,040.03*
Item - Connection Length:
15m
|
Item - Installation SET Variant:
For Facades up to 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 15 m control cable 5 x 1.5 mm
DE-WU097366090 – 15 m cable duct 60 x 90 mm, white
DE-HS760002001 – 15 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 15m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
Coolenvi™ - Mounting SET 15m I/O Commercial Devices
€1,174.99*
Item - Connection Length:
15m
|
Item - Installation SET Variant:
For Facades 3.6 - 14.0 kW
Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick couplings
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 12x cable ties KBL 1 polyamide with plastic tongue
DE-HS1001 – 15 m control cable 5 x 1.5 mm²
DE-WU097366090 – 15 m cable trunking 60 x 90 mm, white
DE-HS760002001 – 15 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 40x TX screws 4.5x60mm
DE-WU590620635 – 42x wall plugs 6mm
DE-WU0176203535 – 2x TX screws 3x35mm
DE-S321.4016 – 15 m CU double pipe 10,16mm insulated
DE-S282.0541 – 2x solder fittings 10mm
DE-S282.0543 – 2x solder fittings 16mm
1x nitrogen soldering gas (flat rate), sealant included
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support bars 45°
DE-WU0862005326 – 2x retaining clips M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x fender washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof mounting:
DE-LIN1229000 - 1x SET roof support beams 1000mm
DE-WU071392915 – 2x construction protection mats (strips)
Variants from €1,130.99*
Coolenvi™ - Mounting SET 20m I/O Comfort Devices
€1,276.18*
Item - Connection Length:
20m
|
Item - Installation SET Variant:
For Facades up to 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 20 m control cable 5 x 1.5 mm
DE-WU097366090 – 20 m cable duct 60 x 90 mm, white
DE-HS760002001 – 20 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 20m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
Coolenvi™ - Mounting SET 20m I/O Commercial Devices
€1,419.99*
Item - Connection Length:
20m
|
Item - Installation SET Variant:
For Facades 3.6 - 14.0 kW
Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick couplings
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 20x cable ties KBL 1 polyamide with plastic tongue
DE-HS1001 – 20 m control cable 5 x 1.5 mm²
DE-WU097366090 – 20 m cable trunking 60 x 90 mm, white
DE-HS760002001 – 20 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 50x TX screws 4.5x60mm
DE-WU590620635 – 52x wall plugs 6mm
DE-WU0176203535 – 2x TX screws 3x35mm
DE-S321.4016 – 20 m CU double pipe 10,16mm insulated
DE-S282.0541 – 2x solder fittings 10mm
DE-S282.0543 – 2x solder fittings 16mm
1x nitrogen soldering gas (flat rate), sealant included
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support bars 45°
DE-WU0862005326 – 2x retaining clips M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x fender washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof mounting:
DE-LIN1229000 - 1x SET roof support beams 1000mm
DE-WU071392915 – 2x construction protection mats (strips)
Variants from €1,376.99*
Coolenvi™ - Mounting SET 3m I/O Comfort Devices
€466.73*
Item - Connection Length:
3m
|
Item - Installation SET Variant:
For Facades up to 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 3 m control cable 5 x 1.5 mm
DE-WU097366090 – 3 m cable duct 60 x 90 mm, white
DE-HS760002001 – 3 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 20x TX screws 4.5x60mm
DE-WU590620635 - 20x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 3m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
Coolenvi™ - Mounting SET 3m I/O Commercial Devices
€585.99*
Item - Connection Length:
3m
|
Item - Installation SET Variant:
For Facades 3.6 - 14.0 kW
Installation kit for small and large split air conditioning systems, primarily for commercial applications, consisting of the following individual components in the corresponding quantities and for a maximum rated air conditioning output of approximately 12 kW.
Installation set – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy-Mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 3 m control cable 5 x 1.5 mm
DE-WU097366090 – 3 m cable duct 60 x 90 mm, white
DE-HS760002001 – 3 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 20x TX screws 4.5x60mm
DE-WU590620635 - 20x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4016 - 3m CU double pipe 10, 16mm insulated
DE-S282.0541 - 2x solder sockets 10 mm
DE-S282.0543 – 2x solder sockets 16 mm
1x nitrogen flat rate, soldering gas, sealant
Mounting kit variant 1 – For facades with a cooling capacity over 3.5 kW:
DE-WU0862009062 – 2x wall brackets 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x bracket 45°
DE-WU0862005326 – 2x retaining clips clamp
DE-WU005791040 – 2x hexagon screw M10
DE-WU037110 – 2x hexagon nut M10
DE-WU590681266 – 6x Universal wall anchor 12 mm
DE-WU019210100 – 6x Hex bolts M10x100
DE-WU041610 – 6x Washers M10
Mounting kit variant 2 – For floor or flat roof mounting:
DE-LIN1229000 - 1x SET roof support beam 1000 mm
DE-WU071392915 – 2x Construction site protection mats in strips
Coolenvi™ - Mounting SET 5m I/O Comfort Devices
€612.62*
Item - Connection Length:
5m
|
Item - Installation SET Variant:
For Facades up to 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 5 m control cable 5 x 1.5 mm
DE-WU097366090 – 5 m cable duct 60 x 90 mm, white
DE-HS760002001 – 5 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 5m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
Variants from €570.72*
Coolenvi™ - Mounting SET 5m I/O Commercial Devices
€688.50*
Item - Connection Length:
5m
|
Item - Installation SET Variant:
For Facades 3.6 - 14.0 kW
Installation set for small and large split air conditioning systems, primarily for residential use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick connectors
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x white acrylic sealant – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 5 m control cable 5 x 1.5 mm
DE-WU097366090 – 5 m cable duct 60 x 90 mm, white
DE-HS760002001 – 5 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 30x TX screws 4.5x60 mm
DE-WU590620635 – 32x wall plugs 6 mm
DE-WU0176203535 – 2x TX screws 3x35 mm
DE-S321.4046 – 5 m CU double pipe 6, 12 mm insulated
DE-S282.0540 – 2x solder sleeves 6 mm
DE-S282.0542 – 2x solder sleeves 12 mm
1x nitrogen soldering gas (flat rate) content, sealant
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 - 2x wall bracket 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 - 2x support beams 45°
DE-WU0862005326 - 2x holding clamp M10
DE-WU005791040 - 2x hex screw M10
DE-WU037110 - 2x hex lock nut M10
DE-WU041610 - 6x body washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof installation:
DE-LIN1229000 - 1x SET roof support beams 1000 mm
DE-WU071392915 – 2x construction site protective mats (strips)
Variants from €645.00*
New
Coolenvi™ - Supplementary SET for Heavy-duty on ETICS
€300.51*
Item - Quantity:
1 Pc
Installation set for anchoring of usual two-point consoles with supporting trusses, primarily for installing appliances in commercial use on insulated facades with External Thermal Insulation Composite System. This SET is consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approximately 12 kW and thickness of insulation of upt o 200mm max.
Installation Set – For ETICS thickness from 100 - 200 mm:
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0903450205 – 3x Allround Injection Mortar WIT-VM 250 – 420 ml
DE-WU090344121 - 6x 12x50mm Sieve sleeve anchor - Perforated brickwork, aerated concrete
DE-WU0905461016 - 6x M10x260mm Anchor rod for injection system
DE-WU041610 – 12x M10x30mm fender washer
DE-WU031710 – 12x hex nuts M10
DE-WU0911100200 - 6x Distance Spacer Installation AMO MAX
%
Cu-Arc 5002A 90° i/i 15mm
€2.98*
€2.99*
(0.33% saved)
Conex-Bänninger 5000 series solder and transition fittings are universally applicable and manufactured from oxygen-free copper CU-DHP (material number CW024A according to DIN CEN/TS 13388).
They are available in various designs and sizes (6 to 108 mm).Highly corrosion-resistant and dezincification-resistant. Also suitable for use with aggressive media (e.g., seawater).The capillary solder fittings comply with DIN EN 1254 and the DVGW regulations GW 6 and G 8, as well as the quality guidelines.
%
Cu-Arc 5002A 90° i/i 16mm
€3.20*
€3.48*
(8.05% saved)
Conex-Bänninger 5000 series solder and transition fittings are universally applicable and manufactured from oxygen-free copper CU-DHP (material number CW024A according to DIN CEN/TS 13388).
They are available in various designs and sizes (6 to 108 mm).Highly corrosion-resistant and dezincification-resistant. Also suitable for use with aggressive media (e.g., seawater).The capillary solder fittings comply with DIN EN 1254 and the DVGW regulations GW 6 and G 8, as well as the quality guidelines.
%
Cu-Arc 5002A 90° i/i 18mm
€3.75*
€4.11*
(8.76% saved)
Conex-Bänninger 5000 series solder and transition fittings are universally applicable and manufactured from oxygen-free copper CU-DHP (material number CW024A according to DIN CEN/TS 13388).
They are available in various designs and sizes (6 to 108 mm).Highly corrosion-resistant and dezincification-resistant. Also suitable for use with aggressive media (e.g., seawater).The capillary solder fittings comply with DIN EN 1254 and the DVGW regulations GW 6 and G 8, as well as the quality guidelines.
%
Cu-Arc 5002A 90° i/i 22mm
€3.98*
€6.67*
(40.33% saved)
Conex-Bänninger 5000 series solder and transition fittings are universally applicable and manufactured from oxygen-free copper CU-DHP (material number CW024A according to DIN CEN/TS 13388).
They are available in various designs and sizes (6 to 108 mm).Highly corrosion-resistant and dezincification-resistant. Also suitable for use with aggressive media (e.g., seawater).The capillary solder fittings comply with DIN EN 1254 and the DVGW regulations GW 6 and G 8, as well as the quality guidelines.
Funnel Siphon Polypropylen white
€21.14*
Hygienic - Professional - Simply Practical. Air conditioning units can only capture condensate or residual water with this funnel siphon, which directs it cleanly and separately from the sewage system into the drain. This oval funnel is made of durable white plastic and can be installed tightly against almost any wall. Its narrow and short shape allows installation in hard-to-reach areas that must remain accessible for maintenance purposes. Suitable for the standard DN 50 outlet. The adjustable range of 220 to 340 mm allows for easy, precise mounting at the correct height.
The product is practically pre-assembled and includes the dip tube, wall pipe, and funnel. The bend can be easily removed for cleaning and reassembled. Secure tightening is done by hand using sturdy, craftsmanship-grade union nuts.
The high-quality plastic is break-resistant, resistant to household cleaning agents, and features smooth, pore-free surfaces. Please note: This siphon is suitable as a replacement for ball siphons that can handle different overpressure or underpressure situations.
Purpose: For catching residual water / leak water
Material: PP - Polypropylene
Color: White
Nominal size DN outlet: DN 50
Temperature resistance min./max.: 0 to 100 °C
Short-term maximum temperature resistance: 130 °C
Height min./max.: 220-340 mm
Height 2: 124 mm
Length: 300 mm
LEAK LOCK® – Sealing Paste for Pipe Connections
€12.80*
The highly flexible, resin-based paste reliably seals threaded and flange connections as well as gasket and mating surfaces. Ideal for new installations, leak tests, repairs, or warranty replacements. LEAK LOCK® adheres to metal and plastic surfaces, fills cavities, and withstands extreme vibrations, temperatures from -73°C to +204°C, and pressures up to 688 bar. It reliably seals chemicals, refrigerants, petroleum products, gases, steam, water, and compressed air. Clean surfaces with alcohol before use.
Content: 40 g
Pre-Insulated Double Cu-Pipe 10/16x1mm 20m
€432.00*
Item - Quantity:
Roll
Pre-Insulated Double Copper Pipe 10/16x1mm 20m Bundle
High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.
Properties:
Insulation vapor diffusion resistance factor: ≥ 11000 μm
Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0
Odor: neutral
Chemical resistance: excellent
Resistance to fungal and pest infestation: excellent
Toxicity in case of fire: none
PE protective film, color: white, embossed
Sound insulation up to 30 dB of flow and contact noise for metal pipes
Dimensions
Outer diameter: x wall thickness
10 mm x 1 mm / 16 mm x 1 mm
Insulation
Outer diameter: x insulation thickness
28 x 9 / 34 x 9 mm
General
Design: Double pipe
Construction type
Copper pipe in coils
Pipe size: metric
Bundle: per package
1 pc.
Roll length
20 m
Type: TWINSPLIT 10/16
Thermal conductivity: 0.036 W/(m*K)
Pressure
Maximum: operating pressure
183/91 barTemperature data: Ambient temperature
-45 to +90 °C
Variants from €26.50*
Pre-Insulated Double Cu-Pipe 10/18x1mm 20m
€464.00*
Item - Quantity:
Roll
Pre-Insulated Double Copper Pipe 10/16x1mm 20m Bundle
High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.
Properties:
Insulation vapor diffusion resistance factor: ≥ 11000 μm
Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0
Odor: neutral
Chemical resistance: excellent
Resistance to fungal and pest infestation: excellent
Toxicity in case of fire: none
PE protective film, color: white, embossed
Sound insulation up to 30 dB of flow and contact noise for metal pipes
Dimensions
Outer diameter: x wall thickness
10 mm x 1 mm / 18 mm x 1 mm
Insulation
Outer diameter: x insulation thickness
28 x 9 / 44 x 13 mm
General
Design: Double pipe
Construction type
Copper pipe in coils
Pipe size: metric
Bundle: per package
1 pc.
Roll length
20 m
Type: TWINSPLIT 10/18
Thermal conductivity: 0.036 W/(m*K)
Pressure
Maximum: operating pressure
183/91 barTemperature data: Ambient temperature
-45 to +90 °C
Variants from €28.50*
Pre-Insulated Double Cu-Pipe 6/10x1mm 20m
€249.00*
Item - Quantity:
Roll
Pre-Insulated Double Copper Pipe 6/10x1mm 20m Bundle
High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.
Properties:
Insulation vapor diffusion resistance factor: ≥ 11000 μm
Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0
Odor: neutral
Chemical resistance: excellent
Resistance to fungal and pest infestation: excellent
Toxicity in case of fire: none
PE protective film, color: white, embossed
Sound insulation up to 30 dB of flow and contact noise for metal pipes
Dimensions
Outer diameter: x wall thickness
6 mm x 1 mm / 10 mm x 1 mm
Insulation
Outer diameter: x insulation thickness
26 x 9 / 28 x 9 mm
General
Design: Double pipe
Construction type
Copper pipe in coils
Pipe size: metric
Bundle: per package
1 pc.
Roll length
20 m
Type: TWINSPLIT 6/10
Thermal conductivity: 0.036 W/(m*K)
Pressure
Maximum: operating pressure
183/91 barTemperature data: Ambient temperature
-45 to +90 °C
Variants from €18.50*
Pre-Insulated Double Cu-Pipe 6/12x1mm 20m
€292.00*
Item - Quantity:
Roll
Pre-Insulated Double Copper Pipe 6/12x1mm 20m Bundle
High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.
Properties:
Insulation vapor diffusion resistance factor: ≥ 11000 μm
Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0
Odor: neutral
Chemical resistance: excellent
Resistance to fungal and pest infestation: excellent
Toxicity in case of fire: none
PE protective film, color: white, embossed
Sound insulation up to 30 dB of flow and contact noise for metal pipes
Dimensions
Outer diameter: x wall thickness
6 mm x 1 mm / 12 mm x 1 mm
Insulation
Outer diameter: x insulation thickness
24 x 9 / 30 x 9 mm
General
Design: Double pipe
Construction type
Copper pipe in coils
Pipe size: metric
Bundle: per package
1 pc.
Roll length
20 m
Type: TWINSPLIT 6/12
Thermal conductivity: 0.036 W/(m*K)
Pressure
Maximum: operating pressure
183/91 barTemperature data: Ambient temperature
-45 to +90 °C
Variants from €20.60*
New
Reinforced PVC Hose ACC00914 – 50 m Roll, Inner Diameter 6 mm
€125.98*
Item - Quantity:
Roll
Transparent, reinforced PVC hose for connecting pumps to condensate drainage. Flexible, durable, and suitable for temperatures from -20 to +60 °C. Perfect for commercial and domestic applications.
Technical Data:
Type: ACC00914
Design: Reinforced PVC hose
Roll length: 50 m
Inner diameter: 6.3 mm
Outer diameter: 11.4 mm
Max. operating pressure: 22 bar
Total weight: 4.5 kg / 50 m
Operating temperature: -20 to +60 °C
Ideal for safe and flexible pump connections to condensate drains, offering high durability and long service life.
Content: 1 lm (€6,299.00* / 50 lm)
Variants from €3.80*
Solder adapter FSA26M 6 mm 023U8041
€25.92*
Solder adapter FSA 26M 6 mm. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.
Solder adapter FSA310M 10mm 023U8043
€30.96*
Solder adapter FSA310M 10mm 023U8043. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.
Solder adapter FSA412M 12mm 023U8045
€36.72*
Solder adapter FSA412M 12mm 023U8045. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.
Solder adapter FSA516M 16mm 023U8047
€39.89*
Solder adapter FSA516M 16mm 023U8047. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.
Solder adapter FSA618M 18mm 023U8009
€61.89*
Solder adapter FSA618M 18mm 023U8009. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.