Comprehensive BIM & Technical Services for Air Conditioning Systems
We offer a full range of services, from BIM-supported monitoring to on-site technical repairs. BIMservice™ - Our solutions ensure optimal performance, energy efficiency, and long-term reliability for your air conditioning systems.
Tip
BIMaudit | VDI Hygiene Inspector
€143.00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from €110.00*
Tip
BIMservice | Air Conditioner Technician
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The air conditioning technician for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly climates.
System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise
As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes:
Accurate leak tests:
We perform precise leak tests to ensure the proper functioning and longevity of your systems.
Adjustment and factory filling of the refrigeration circuit:
Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance.
Personal protection and environmental protection measures:
We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation.
Why Choose Us?
We are internationally recognized for our contributions to environmental protection and safety in building operations.
Expertise and access to AI technologies:
Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot, BIMcare, BIMpilot, or BIMphase
Tip
BIMservice | Air Handling Technician
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The building's ventilation technician for supply and exhaust air handling units ensures draft-free and freshly filtered indoor air.
Expertise for optimal indoor air quality
Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades.
Efficient air filtration for clean indoor air
Intelligent ventilation concepts for energy savings
Professional maintenance and repair for maximum operational reliability
BIM-Service – for air quality that impresses.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
BIMpilot | Business trip in Denmark
€73.95*
Your next Service-Hub:
Ribe 20/40 Km
The climate-neutral arrival and departure for customer service in Denmark. Customer-friendly and environmentally friendly for the country.
Why arrival and departure is a business trip
Every business trip is part of an environmentally friendly supply chain, so our technicians can be on-site quickly and sustainably:
Select the distance for arrival and departure
Select charging station
Travel and charging times are included
Loading times
(at approx. 25 kWh/100 km)
Spacing
Directions
Total
AC3.7 kW/1P22 hours at0-100%
AC7.4 kW/1P11 hours at 0-100%
DC100 kW40 min. at0-100%
Up to 50 km
100 km
7 h
3:30 h
0:40 h
51-100 km
200 km
14 h
7 h
0:50 h
101-150 km
300 km
20 h
10:30 h
1 h
151-200 km
400 km
26:40 h
14 h
1:30 h
201-250 km
500 km
33:30 h
18 h
2 h
251-300 km
600 km
40 h
21 h
2:30 h
301-500 km
1000 km
67 h
35 h4 h
501-600 km
1200 km
80 h
41:30 h
4:30 h
601-800 km
1600 km
107 h
55 h
5:30 h
801-1000 km
2000 km
133 h
69 h
8 h
Variants from €1.85*
Tip
BIMservice | Fault Diagnose Air Conditioning
€412.50*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
Unknown fault with air conditioning? We will find the cause within 3 hours for quick repairs.
The advantage of a maintenance contract
After maintenance has been carried out as part of "BIM-Care", we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIM-Care is then continued for at least 12 months without interruption.
Always configure supply chains completely
It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive service, travel costs and work equipment are not included and these can be found under BIMpilot or BIMservice.
Content: 3 Hour/s (€137.50* / 1 Hour/s)
Variants from €133.50*
Tip
BIMservice | Fault Diagnose Construction Technology
€412.50*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
An error in the construction technology? Within 3 hours we have solutions ready and estimate the repair costs.
The construction technology error analysis
We inspect, measure, endoscope, dismantle, walk around and find the best way to locate the causes and develop well-founded technical action plans. We are aware that not everything can be done within a few hours, but a structured and precise damage analysis lays the foundation for a sustainable solution.
The advantage of our BIM facility management
If you use our facility management continuously or as part of BIMcare™ maintenance, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned or BIMcare™ and facility management are subsequently continued for at least 12 months without interruption. We do always recommend an appropriate BIM-Model of your building.
Always configure supply chains completely
It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive package, travel costs and work equipment are not included and these can be found under BIMpilot™ or BIMservice™.
Content: 3 Hour/s (€137.50* / 1 Hour/s)
Variants from €133.50*
Tip
BIMservice | Technical Advice
€110.00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
Measurement, optimization or advice? We offer this 1 hour on site or remote, for tailor-made offers.
The advantage with BIM-Care maintenance contract
After maintenance has been carried out as part of "BIM-Care", we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIM-Care is then continued for at least 12 months without interruption.
Even without BIM-Care there is an affordable Remote Service available via WhatsApp-conversation.
Always configure supply chains completely
It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive service, travel costs and work equipment are not included and these can be found under BIMpilot or BIMservice.
BIMdepot™ Notice
Please note: for each BIMservice™ order, the necessary BIMdepot™ articles must be added to ensure proper documentation and integration. If our Facility Manager coordinates your services, these BIMdepot™ requirements are automatically included.
BIMdepot | Operational Air Quality Measuring Device
€620.00*
BIMdepot Filter:
Air Handling Technology
This measuring device is used by our technicians to measure quality and air flow in workplaces.
We also recommend the following equipment for various tasks:
Air flow meter
Sound level meter
Smoke tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Air Volume Measuring Device
€66.00*
BIMdepot Filter:
Air Handling Technology
This measuring device is used by our technicians to measure air flow at air vents and in air ducts.
We also recommend the following equipment for various tasks:
Air quality meter
Sound level meter
Smoke test sticks
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Disposal Station Refrigerants
€265.00*
BIMdepot Filter:
Air Handling Technology
This condenser station is used by our technician to recover, dispose of or collect refrigerant gases.
For various tasks, we also recommend the following equipment:
Recycled bottles for storage or disposal
Refrigeration fitting suitable for the refrigerant gas
Refrigerant scale for documentation of recorded gas quantities
Nitrogen Nitrogen for pressure testing before filling
Much more is needed to refill...
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Infrared Camera
€162.00*
BIMdepot Filter:
Construction Technology
This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads.
For various tasks, we also recommend the following equipment:
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Installation Tester IEC 60364-6/EN 50110
€105.00*
BIMdepot Filter:
Electrical engineering
The testing device is used by our technicians to check installation while commissioning or even if in operation to ensure the cleanest supply of electricity for your demand, including electromagnetic compliance.
We also recommend the following equipment for various tasks:
Appliance Tester
Cable Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Leak Scanner Refrigeration
€25.00*
BIMdepot Filter:
Air Handling Technology
This leak scanner is used by our technicians for assessments, leak testing and environmental important measures and documentation on refrigeration cycless.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Mobile Brazing Station
€149.00*
BIMdepot Filter:
Air Handling Technology
This mobile soldering station is used by our technicians to create professional connections on refrigeration circuits, plumbing, and heating systems. It also includes consumables such as brazing solder, soldering gases, and flux.
We also recommend the following equipment for various tasks:
Nitrogen gas cylinder as soldering forming gas
Nitrogen gas cylinder for pressure testing
Vacuum pump for evacuating refrigeration systems, for example
There's much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Nitrogen Pressure Reducer
€15.00*
BIMdepot Filter:
Air Handling Technology
This pressure reducer is used by our technicians for commissioning, leak testing and soldering work on refrigeration systems.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Recycling Bottle Refrigerants
€382.31*
BIMdepot Filter:
Air Handling Technology
This bottle is used to capture, transport or dispose up to 9 Kg of refrigerant gases. With this, our technician works in an environmentally friendly way. Proper disposal of gases, hazardous goods transport surcharge and cleaning of the container are included.
For various tasks we also recommend:
Disposal Station
Refrigeration Fitting
Refrigerant scale
Nitrogen for pressure tests before commissioning or filling refrigeration circuits
There are refrigerators, vacuum pumps and much more for any task ...
If the item is listed as a rental item in your sales channel, it usually needs to be shipped together with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Refrigerant Pressure Gauge
€25.00*
BIMdepot Filter:
Air Handling Technology
This aid as a pressure gauge battery is used by our technicians for all work on refrigeration circuits and air conditioning systems.
For various tasks, we also recommend the following equipment:
Nitrogen nitrogen gas bottle for pressure tests
Refrigerant scale for collection or disposal
Vacuum pump before recommissioning
In addition to fresh refrigerant, there is much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Refrigerant Scale
€38.00*
BIMdepot Filter:
Air Handling Technology
This scale is used by our technicians to accurately measure the amount of refrigerant during both filling and disposal processes.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Vacuum pump after pressure testing
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Safety Tester DIN VDE 0701/0702
€120.00*
BIMdepot Filter:
Electrical engineering
The testing device is used by our technicians to regularly check office and household appliances for electrical safety.
We also recommend the following equipment for various tasks:
Installation Tester
Cable Tester
and much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Vacuum Pump
€58.00*
BIMdepot Filter:
Air Handling Technology
This vacuum pump is used by our technicians to evacuate each refrigerant cycle once new installed for commissioning or after replacement of fitted appliances.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
Tip
BIMpilot | Analysis Kit Surface Contact Samples
€110.00*
Language Version:
English
Contact Sample Set for Professionals: Contains 5 round agar plates in Petri dishes for surface sampling – ideal for air filters, condensate trays, interior walls of air-conducting components, food processing areas, or refrigeration units. Sample evaluation and the creation of a test report (e.g., according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user.
Note: Additional sets are required for more than 4 samples.
Germ and Bacteria Analysis
Most bacteria grow as red colonies on TTC agar – occasionally fungi and yeasts also grow. Colorless colonies are also included in the analysis. The decisive factor is the colony-forming units (CFU), not their size. If the bacterial count is high, the coating may appear uniformly colored or colorless if there is a high level of growth. Comparison with a fresh medium helps avoid misinterpretations.
Guideline values:
<104 CFU/ml = low contamination
104 – 106 CFU/ml = moderate
>106 CFU/ml = high, unacceptable
Important information
Sampling kit – no on-site service included.
Transport, consultation, action planning & Results discussion can be booked separately.
Longer stays require a separate booking.
Additional services are available via BIM Facility Management or Expert Report.
Additional costs can be viewed at BIMpilot.
Always professionally secure supply chains
For full process support, we recommend booking a BIM Facility Manager or VDI Hygiene Inspector (Mon-Thurs, 4 days/week).
Please note: Work equipment and travel expenses are not included – details can be found at BIMpilot or BIMservice.
Tip
BIMpilot | Potable Water Analysis Kit
€256.48*
Type Sampling Service :
Direct | biologically
Drinking Water Analysis Kit for Professionals: Includes certified laboratory containers for sampling, sample shipment to the laboratory, analysis, and a test report.
Important: This product is only valid for a single sampling point. Additional kits are required for additional sampling points. On-site deployment of our professionals is not included.
Drinking Water Analysis Options
Our professionals use the provided sampling kit, collect the water sample according to applicable standards, and send it to our certified laboratory for analysis.
Option 1: Chemical and/or biological laboratory analysis
Our specialists use the kit for professional sampling.
The sample is sent to a certified laboratory.
Analysis options:
Chemical parameters mg/l : Lead (Pb), Nickel (Ni), Copper (Cu).
Biological parameters KBE/ml : Coliform bacteria, Intestinale Enterokokken, Pseudomonas aeruginosa, Legionella.
Scope of services:
The price includes only the sampling effort of a maximum of 15 minutes at the sampling point, not the transport or any services.
Important information
This product is a sampling kit, not a On-site service. The use of our specialists must be booked separately.
The kit does not include transport to the laboratory, consultation, action planning, or explanation of laboratory results.
If longer journeys or stays on factory premises are necessary, a separate booking is required.
Additional on-site services can be booked via BIM Facility Management or Assessments.
Ancillary costs (e.g., travel expenses, accommodation, etc.) can be found via BIMpilot.
Fully configure supply chains
For complete implementation, we recommend booking a BIM Facility Manager or VDI Hygiene Inspector for 4 days per week (Monday to Thursday).
Note: This offer is not all-inclusive. Travel expenses and work materials are not included and can be viewed at BIMpilot or BIMservice.
Variants from €76.72*