Digital BIM-Services for technical customer service
With our BIM-supported customer service solutions, we offer you tailor-made services that ensure sustainable efficiency and profitability in your building infrastructure through precise planning and proactive maintenance.
BIM-Services for efficient technical customer service
As a building operator, developer or investor, you benefit from our digital BIM-Services, which optimize your maintenance and service processes and reduce costs in the long term. The real added value lies in integrating BIM-Care with CAFM, 3D models and the expertise of our facility managers. This enables you to make technical customer service more efficient, identify problems early and use resources in a targeted manner. Our solutions offer precise planning and a sustainable building infrastructure. Use digitalization to operate your buildings economically and maximize the service life of your infrastructure.
Facility Management Support
Integrated and reliable upkeep of facilities, refrigeration & HVAC systems. BIM/CAFM-based maintenance, compliance assurance and energy efficiency measures protect property value sustainably.
BIM Care – Smart Maintenance
Choose hassle-free service agreements with no long contracts or once-off maintenance for selected systems. Practical, transparent and value-protecting for your property.
BIM-Service
for the climate
Repair of refrigeration and air conditioning systems, leak testing, compliance with operator obligations, F-gas management & environmentally friendly disposal, including energy efficiency.
BIM-Service
for the air
Customer service for ventilation systems for fans, air filters, humidification and dehumidification, setting and balancing of air volume flows, ensuring hygiene, fire and smoke protection and heat exchangers.
BIM-Service
for the earth
Technical customer service for EMSR & EMC. Repair and maintenance of electrical, measuring, control and regulation technology, exclusion of interference radiation, photovoltaic systems with inverters and synchronization of generators and microgrid networks.
BIM-Service
for water
Technicians for many water systems: repair of drinking water technology, water filters, hygiene flushing systems, balancing of hot water circulation lines, contactless water drainage, oil and grease separators, lifting systems and the separation of drinking water, fire extinguishing and process water systems.
BIM-Service
for building protection
Construction customer service for buildings and their protection and safety. Repairs to avoid cold bridges, leaks and roof sealing. Fire protection systems for cable and pipe penetrations to ensure the structural integrity and longevity of buildings.
BIM-Service
for Diagnostics and Simulation
Just as the four elements—fire, water, earth, and air—work in harmony to sustain life, the principles of heat transfer, electron movement, gas and water flow are fundamental forces in energy efficiency. By optimizing these elemental processes, we can prevent energy loss and minimize costly investments in repair and recovery, ensuring a sustainable future.
BIM Service
for Expert Opinion and MEP Assessment
Just as the four elements – fire, water, earth, and air – work together in balance to sustain life, the principles of heat transfer, electron movement, and gas and water flow are vital forces in building operations. By providing professional opinion and optimising these processes, we can prevent energy losses and limit costly investments in repair and restoration, securing a sustainable future.
Let's create your air conditioning service offer!
Even if creating air conditioning service offers seems complicated or does not require spare parts. At Coolenvi, worry-free building operators are our customers. We offer diagnostics and advice as part of our BIM Facility Management 4.0. This enables us to provide a complete set of services, special tools, and materials to create tailor-made offers for your specific requirements
Tip
BIMaudit | VDI Hygiene Inspector
R 2 860,00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from R 550,00*
Tip
BIMservice | Air Conditioner Technician
R 820,00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The air conditioning technician for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly climates.
System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise
As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes:
Accurate leak tests:
We perform precise leak tests to ensure the proper functioning and longevity of your systems.
Adjustment and factory filling of the refrigeration circuit:
Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance.
Personal protection and environmental protection measures:
We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation.
Why Choose Us?
We are internationally recognized for our contributions to environmental protection and safety in building operations.
Expertise and access to AI technologies:
Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot, BIMcare, BIMpilot, or BIMphase
Tip
BIM Facility Manager
R 17 600,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
R 4 400,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
For healthy breathing air in the room
Coolenvi is not a contractor for air handling systems but is a service partner for optimization, conversion, hygiene and economical operation. Indoor air technology can be a complex overall system. We are your partner for supply technology preventative fire and smoke protection air filter technology and regulated occupancy-dependent economic efficiency.
Tip
BIMaudit | VDI Hygiene Inspector
R 2 860,00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from R 550,00*
Tip
BIMservice | Air Handling Technician
R 750,00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The building's ventilation technician for supply and exhaust air handling units ensures draft-free and freshly filtered indoor air.
Expertise for optimal indoor air quality
Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades.
Efficient air filtration for clean indoor air
Intelligent ventilation concepts for energy savings
Professional maintenance and repair for maximum operational reliability
BIM-Service – for air quality that impresses.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Tip
BIM Facility Manager
R 17 600,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
R 4 400,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
Competent technicians for electrical measurement, control and regulation technology
Reliable service for control cabinets, digital controllers and building management technology
BIMservice | E&IC Control Engineer
R 810,00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective.
How our climate-neutral E&IC Technician works
First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings.
Always fully configure supply chains
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot, BIMcare, BIMpilot or BIMphase.
Tip
BIM Facility Manager
R 17 600,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
R 4 400,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
Legionella in drinking water? - We solve it!
BIMservice also offers sanitary technicians for drinking water systems and hot water preparation.
Tip
BIMaudit | VDI Hygiene Inspector
R 2 860,00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from R 550,00*
Tip
BIM Facility Manager
R 17 600,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIM Manager - Operative
R 4 400,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The digital project manager is practical and works remotely. Buildings are increasingly being operated in a climate-neutral way as a result.
The BIM Manager opens up new horizons
BIM management is an unknown field for many. It is by no means just about software, because practical experience is essential. Instead of just being able to see dotted lines on the screen, our BIM Manager has a profound understanding of all the trades involved. The whole thing is comparable to video conferences with a mirror image of the building. But there are no remote activities. However, we are preparing for on-site operations along the supply chain and buildings are operated much more economically, promptly and sustainably.
Always configure supply chains completely
Ideally a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMpilot or BIMphase.
Skilled Technicians for Construction Technology Services
Reliable solutions for preserving and enhancing the value of your building through expert services in construction technology and maintenance.
Tip
BIM Facility Manager
R 17 600,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
We embody the essence of the four elements
Coolenvi binds the harmonious balance between man and nature. Immerse yourself in the fascinating symphony of life shaped by the essential elements that surround us. The air that we breathe flows through our lungs with freshness and vitality while the clear water that we drink quenches our thirst for purity. The warming fire that surrounds us gives us security and creates a pleasant atmosphere. As our foundation, the earth forms solid ground beneath our feet, symbolizing stability and connection to nature.
These four elements - air, water, fire and earth - are not only essential to life in nature but also sources of health and joy in life in buildings. Every moment fills you with technology, energy and joy as well as full of vitality and well-being.
This is how we achieve your ESG goals (Economical-Social-Governance)
Tip
BIMaudit | VDI Hygiene Inspector
R 2 860,00*
Having a BIMcare contract:
❌ No, without contract
|
Work Location:
DE - From Essen
The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces.
Hygiene assurance for building services systems and food processing surfaces
Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials:
Advantages:
Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise.
Sampling and risk assessment:
Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators.
Documentation and recurring inspections:
The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling.
Visual inspection and testing of external work environments:
A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors.
With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company.
Are maintenance contracts necessary?
We offer this without restrictive contracts in the BIMcare™ category.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
Variants from R 550,00*
Tip
BIMservice | Air Conditioner Technician
R 820,00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The air conditioning technician for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly climates.
System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise
As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes:
Accurate leak tests:
We perform precise leak tests to ensure the proper functioning and longevity of your systems.
Adjustment and factory filling of the refrigeration circuit:
Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance.
Personal protection and environmental protection measures:
We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation.
Why Choose Us?
We are internationally recognized for our contributions to environmental protection and safety in building operations.
Expertise and access to AI technologies:
Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot, BIMcare, BIMpilot, or BIMphase
Tip
BIMservice | Air Handling Technician
R 750,00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The building's ventilation technician for supply and exhaust air handling units ensures draft-free and freshly filtered indoor air.
Expertise for optimal indoor air quality
Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades.
Efficient air filtration for clean indoor air
Intelligent ventilation concepts for energy savings
Professional maintenance and repair for maximum operational reliability
BIM-Service – for air quality that impresses.
Always fully configure supply chains
This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™
BIMservice | E&IC Control Engineer
R 810,00*
Having a BIMcare contract:
✅ Yes, with contract
|
Work Location:
Remote
The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective.
How our climate-neutral E&IC Technician works
First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings.
Always fully configure supply chains
This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot, BIMcare, BIMpilot or BIMphase.
Tip
BIM Facility Manager
R 17 600,00*
Weekly model:
4 days/week
|
Work Location:
Remote
The modern BIM Facility Manager, like a "caretaker", ensures environmentally friendly operation of the building and technology.
The advantages with BIM Facility Manager
Technology and buildings are organized economically, including operator obligations. This ensures repairs, maintenance and the organized deployment of specialists. External contracts with BIM-CAFM are monitored according to generally accepted technical standards. BIM Facility Management knows more than just mechanics, fire protection, construction technology, MSR or refrigeration technology.
How BIM Facility Managers work with buildings
In general, every building needs a 3D model and, if necessary, it will be created for you. This is the basis for the climate-neutral concept for building management. Additionally, a digital platform for BIM-CAFM will be mandatory, which you can obtain through our BIM Manager.
Where maintenance contracts are offered
This can be found under the category BIMcare™.
Always fully configure supply chains
The best is a 4 days / week from Monday to Thursday. This is not an all-in, travel costs and work equipment are not included which you may find under the catgeories BIMpilot™ or BIMphases™.
BIMaudit | MEP Appraiser - Advisory report
R 23 700,00*
1. Appraisal - Specialist Area:
Ventilation technology
|
2. Appraisal - Concern:
Heating, ventilation, air conditioning - problems or failures
|
3. Appraisal - Purpose:
Technical advisory report
|
4. Appraisal - Services included:
Assessment of responsibilities
|
Language Version:
German
|
Work Location:
Remote
With independent expert we will prepare you customized advisory and technical reports. This supports to understand, resolve, and professionally document the problem. This provides an objective assessment, dissolving of disputes, clear technical insights, and a reliable basis for further action — be it for repair, negotiation, or prevention.
1. What is being assessed?
Each area of expertise requires its own report.
Ventilation technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinet)
Energy consulting & renovation
️2. Where about is advise requested?
🌡️ Heating, ventilation, air conditioning – problems or failures
📉 Loss of value / building damage
🚧 Defects in existing buildings, during renovation, or during new construction
3. What do you need the appraisal for?
🧑🏫 Technical advisory report
🏡 Assistance with home purchase
🏗️ Accompaniment during building inspections
📊 Property valuation
4. Which services are required?
Assessment of Responsibilities
Repair Recommendations
Energy Efficiency
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).
BIMaudit | MEP Appraiser - Damage Assessment
R 23 700,00*
1. Appraisal - Specialist Area:
Ventilation technology
|
2. Appraisal - Concern:
Water damage, burst pipes
|
3. Appraisal - Purpose:
Legal dispute / preservation of evidence
|
4. Appraisal - Services included:
Cause of Damage & Condition Assessment Scope documented in detail
|
Language Version:
German
|
Work Location:
Remote
Whenever you have any damages to your building's technology - We are there whether it's water damage, no heating, or a dispute with improvements – with this you will receive a customised report from our independent building services expert.
1. What is being assessed?
Ventilation technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinet)
Construction contracts & Building Acceptance
️2. Where did damage occur?
💧 Water damage, burst pipes
🔥 Fire damage, short circuit, power surge
🌫️ Mold, indoor air or odors
🧱 Construction defects or construction delays
📉 Loss of value / building damage
🌪️ Natural event (storm, hail, lightning, flood)>
3. What do you need the appraisal for?
⚖️ Legal dispute / preservation of evidence
🕊️ Mediation or out-of-court settlement
🧾 Review of a construction contract
💰 Submission to insurance / claims settlement
4. Which services are required?
Cause of Damage & Condition Assessment Scope documented in detail
Estimation of renovation costs
Repair recommendations
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM Management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).
BIMaudit | MEP Appraiser - Defect report
R 17 600,00*
1. Appraisal - Specialist Area:
Air conditioning technology
|
2. Appraisal - Concern:
Construction defects or construction delays
|
3. Appraisal - Purpose:
Accompanying building inspections
|
4. Appraisal - Services included:
Preservation of evidence with images/measurement data
|
Language Version:
English
|
Work Location:
Remote
Independent experts like us are familiar with establishing assessments for each trade of technical building equipment. According to a structured checklist, most condition assessments are one solution for repairs, negotiations, or prevention.
1. What trade is to be assessed?
Ventilation ducting technology
Air conditioning technology
Fire protection (dampers, concept, smoke protection)
Gas or heat pump heating
Refrigeration technology
Plumbing technology (drinking water)
Electrical engineering (low voltage, meter cabinet)
Building automation (switch cabinets)
Energy consumption
2. What are mostly defects?
🏡 Visual Collision Review of BIM Discipline Models
🧱 Construction defects or construction delays
📉 Loss of value / building damage
🚧 Defects during renovation or new construction
3. What appraisals are usual for?
⚖️ Legal disputes / securing evidence
🏗️ Accompanying building inspections
🏡 Assistance with buying a house
4. What services are required?
Preservation of evidence with images/measurement data
Assessment of responsibilities
Support with acceptance or negotiations
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The expert reviews and prepares a customized report.
✔️ Optional: Additional services such as BIM Management can be booked.
This package includes the preparation of a report in the following format:
Cover sheet
Table of contents
Description
Findings / Evaluation
Summary
Disclaimer
The report can also be provided in tabular form or as a project document on a digital platform upon request.
Note:
Please book the appropriate number of packages to cover the desired scope of services, depending on the task, building size, and intended use.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMpilot™, BIMservice™, or BIM Management. Processing takes place within a 4-day week (Monday–Thursday).
BIMaudit | MEP Arbitrator - Dispute Resolution
R 23 700,00*
1. Appraisal - Specialist Area:
Construction contracts & Building Acccptance
|
2. Appraisal - Concern:
Construction defects or construction delays
|
3. Appraisal - Purpose:
Mediation or out-of-court settlement
|
4. Appraisal - Services included:
Support with acceptance or negotiations
|
Language Version:
German
|
Work Location:
Remote
This neutral mediator supports you in disputes concerning technical building equipment. The goal is an amicable solution that ensures the quick and long-term operation of the building technology in an appropriate manner.
Dispute resolution for building technology and contractual issues
As a neutral mediator, I conduct individual discussions, identify conflicts, and develop solution-oriented approaches with the parties involved. The goal is a quick, out-of-court settlement – fair, structured, and independently documented.
Your advantages:
Confidential one-on-one discussions without confrontation
Documented attempts at settlement for your protection
Legal position remains intact if settlement fails
Representatives (attorney, expert) possible
No clarification of liability – focus on solutions
Termination of mediation:
Mutual agreement
Declaration of failure
Termination by the mediator if there is no prospect of success
No payment of the advance fee
No participation in Appointments
BIMaudit™ Process
✔️ You submit documents, photos, and data digitally.
✔️ The appraiser reviews and prepares an individual report.
✔️ Optional: Additional services such as BIM Management can be booked.
Always fully configure supply chains
The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).
Tip
BIMcare | Building Controls Maintenance
R 20 900,00*
Subscription:
One-time maintenance
|
System Type BIMcare:
EIC - Switch Cabinet + Power Distribution + Fuses
With BIMcare™, we take care of your switch cabinets, inverters, field devices, and digital controllers for building technical systems. Simple, clear, and without complex contracts – select your maintenance package via the dropdown menus:
Maintenance Price for Switch Cabinets
The price applies per switch cabinet up to 1000 mm wide. Use the dropdown to select quantity, which determines the total price.
The Perfect Maintenance Plan
Three elements make this maintenance contract particularly transparent:
Dropdown 1 – Equipment Type: Switch cabinet, field devices, digital controller, or fire protection technology
Dropdown 2 – Duration: One-time, 24, 36 or 48 months, optionally with 36plus™ / 48plus™ extended warranty
Number of switch cabinets: determines the total price
The contract can be extended or reordered at any time.
Fixed Intervals Ensure Scheduled Maintenance
Regular maintenance ensures cost-effective and trouble-free operation of your building systems.
Maintenance Intervals
Equipment Type
Spring
Summer
Autumn
Switch Cabinet & Distribution
x
-
-
Field Devices & Consumers
x
-
-
Digital Controller & BMS/GLT & Network
x
-
-
Fire Protection & Emergency Power & UPS
x
-
-
Our Guarantee: Your Safe Harbor
Standard warranty on our installed control technology is 6 months from the installation date. With 36plus™ and 48plus™, the warranty can be extended up to 36 or 48 months.
Plan Your Supply Chains Optimally
Operations ideally take place between May and October, Monday to Thursday (4 days a week). Please note: This is not an all-inclusive service. Costs for repairs, travel, spare parts, consumables, and tools are typically provided by our Facility Manager or available via BIMpilot™, BIMdepot™, or BIMservice™.
Tip
BIMcare | Building Ventilation Systems Maintenance
R 4 000,00*
Subscription:
One-time maintenance
|
System Type BIMcare:
AHU - Fire Damper
We manage your supply and exhaust units, air filters, heat recovery, fire dampers, and steam humidifiers.
No complex contracts – just reliable inspection and maintenance. Simply book, and we handle the rest.
Efficient Air System Maintenance
Book exactly the maintenance you need – no hidden clauses or unnecessary paperwork.
Our technicians work from a clear checklist, reliably, digitally, and carbon-neutrally.
Repair quotes and optional trade services complete the offering:
Select contract duration
Specify number of units
Optional equipment warranty extension
The maintenance contract automatically ends after the chosen duration. New orders can be placed anytime, either by you or our Facility Manager.
Maintenance Intervals
Unit Type
Spring
Summer*
Autumn
Air Handling Unit
x
x
x
Fire Damper
x
-
-
Steam Humidifier
x
-
-
Ductwork
x
-
-
*) Summer maintenance is not included in this contract but can be optionally booked.
Warranty for Added Security
Our standard warranty is 6 months from installation. With 36plus or 48plus, coverage can be extended up to 48 months – ensuring worry-free operation of your air systems.
Plan Operational Deployments Effectively
Deployments are ideally scheduled between May and October, Monday to Thursday (4 days per week). This is not an all-inclusive offer. Costs for repairs, travel, spare parts, consumables, and tools are usually provided by our Facility Manager or available via BIMpilot™, BIMdepot™, or BIMservice™.
Tip
BIMcare | HVAC Maintenance & Care
R 2 500,00*
Subscription:
One-time maintenance
|
System Type BIMcare:
AC - Air Conditioner Indoor Splitunit
We look after your air conditioning systems, heat pumps, as well as cold rooms and chilled water installations.
Without complicated contracts, you get simple and reliable inspection and maintenance.
The Cool Maintenance
No long-term commitments: this maintenance service is cost-effective, flexible and sustainable.
Here’s how our climate-neutral craftsmanship works in practice:
Select contract duration
Set the number of aircon units
Extend warranty as required
Maintenance automatically ends at the end of the chosen contract period. New maintenance orders can be placed at any time.
Maintenance Intervals
System Type
Spring
Summer*
Autumn
Aircon Unit
x
x
x
Chiller
-
x
x
Chilled Water Network
-
x
x
Cooling Machine
x
x
x
Heat Pump
x
-
x
*) Summer maintenance is optional and not included in the BIMcare contract.
The Coolest Warranty
With 36plus or 48plus, you get an all-inclusive care package.
The standard 6-month warranty from installation date can be extended up to 48 months.
Configure Supply Chains Completely
Operations ideally run between May and October, scheduled Monday to Thursday (4 days a week).
Note: this is not an all-inclusive offer. Costs for repairs, travel, spare parts, consumables and necessary work equipment are usually provided by our Facility Manager or listed under BIMpilot™, BIMdepot™ or BIMservice™.
Tip
BIMcare | Inspection & Building Value Protection
R 5 000,00*
Subscription:
One-time maintenance
|
System Type BIMcare:
CON - Technical Fire Protection
We take care of the critical components of your building – from technical fire protection to roof and facade sealing, as well as drainage and wastewater systems.
Our maintenance and inspection services ensure minor issues are detected and resolved early – efficiently, cost-effectively, and to preserve your building’s long-term value.
Essential Building Maintenance
Without long-term commitments, this service provides targeted inspections and maintenance for load-bearing, sealed, and safety-critical building components. Here’s how it works in practice:
Select contract duration
Choose specific building components
Extend warranty for critical elements
The maintenance service automatically ends after the chosen contract period. Seasonal inspections are optional, and new diagnostic or service requests can be made at any time. This contract covers buildings up to 1,000 m² and up to 5 floors.
Maintenance Intervals
Component
Spring*
Summer
Autumn*
Technical Fire Protection
-
x
-
Roof, Window & Facade Sealing
-
x
-
Drainage & Wastewater
-
x
-
Building Joints & Connections
-
x
-
Structural Load-Bearing Tests
-
x
-
*) Spring and summer inspections are optional and not included in standard maintenance.
Extended Warranty for Key Components
With 36plus or 48plus you receive a full maintenance package for critical building elements. The standard 6-month installation warranty can be extended up to 48 months.
Fully Configurable Supply Chains
Operations are ideally carried out Monday to Thursday (4 days per week) from May to October. Note: This is not an all-in-one package. Costs for repairs, travel, spare parts, consumables, and work materials are usually offered via our Facility Manager or can be found on BIMpilot™, BIMdepot™ and BIMservice™
Variants from R 3 600,00*
Tip
BIMcare | Photovoltaic System Maintenance
R 3 600,00*
Subscription:
One-time maintenance
|
System Type BIMcare:
PV - Battery Storage
We take care of your solar systems, inverters, and battery storage systems to ensure smooth and uninterrupted operation. Inspections and maintenance are provided without complex contracts.
We Preserve the Power of the Sun
With scheduled inspections, we ensure a climate-neutral power supply, optimize energy consumption, and maintain solar panels and storage systems. See how easy it is to combine our maintenance service:
Select contract durationSelect number of systemsExtend warranty
This always ends in accordance with the agreed contract duration. New orders are possible at any time. *) Maintenance in the Autumn season has to be booked seperate.
Maintenance Intervals
System Type
Spring
Summer
Autumn*
1x LiFePo4 battery storage
x
-
-
1-3x Inverters, MPPT, IoT
x
-
-
Up to 40 sqm Photovoltaics and String Combiner
x
-
x
We Guarantee the Power of the Sun
Systems installed by us usually come with a 6-month warranty and can be extended with 36plus or 48plus from the invoice date, extending up to 36 or 48 months.
Always Configure Supply Chains Fully
Operations are ideally carried out Monday to Thursday (4 days a week) from May to October. Note: This is not an all-in-one package. Costs for repairs, travel, spare parts, consumables, and work materials are typically offered through our Facility Manager or can be found on BIMpilot™, BIMdepot™, and BIMservice™.
BIMdepot | Operational Disposal Station Refrigerants
R 5 300,00*
BIMdepot Filter:
Air Handling Technology
This condenser station is used by our technician to recover, dispose of or collect refrigerant gases.
For various tasks, we also recommend the following equipment:
Recycled bottles for storage or disposal
Refrigeration fitting suitable for the refrigerant gas
Refrigerant scale for documentation of recorded gas quantities
Nitrogen Nitrogen for pressure testing before filling
Much more is needed to refill...
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Infrared Camera
R 3 240,00*
BIMdepot Filter:
Construction Technology
This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads.
For various tasks, we also recommend the following equipment:
If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Leak Scanner Refrigeration
R 500,00*
BIMdepot Filter:
Air Handling Technology
This leak scanner is used by our technicians for assessments, leak testing and environmental important measures and documentation on refrigeration cycless.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Mobile Brazing Station
R 2 980,00*
BIMdepot Filter:
Air Handling Technology
This mobile soldering station is used by our technicians to create professional connections on refrigeration circuits, plumbing, and heating systems. It also includes consumables such as brazing solder, soldering gases, and flux.
We also recommend the following equipment for various tasks:
Nitrogen gas cylinder as soldering forming gas
Nitrogen gas cylinder for pressure testing
Vacuum pump for evacuating refrigeration systems, for example
There's much more...
If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Nitrogen Pressure Reducer
R 300,00*
BIMdepot Filter:
Air Handling Technology
This pressure reducer is used by our technicians for commissioning, leak testing and soldering work on refrigeration systems.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Recycling Bottle Refrigerants
R 7 646,20*
BIMdepot Filter:
Air Handling Technology
This bottle is used to capture, transport or dispose up to 9 Kg of refrigerant gases. With this, our technician works in an environmentally friendly way. Proper disposal of gases, hazardous goods transport surcharge and cleaning of the container are included.
For various tasks we also recommend:
Disposal Station
Refrigeration Fitting
Refrigerant scale
Nitrogen for pressure tests before commissioning or filling refrigeration circuits
There are refrigerators, vacuum pumps and much more for any task ...
If the item is listed as a rental item in your sales channel, it usually needs to be shipped together with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Refrigerant Pressure Gauge
R 500,00*
BIMdepot Filter:
Air Handling Technology
This aid as a pressure gauge battery is used by our technicians for all work on refrigeration circuits and air conditioning systems.
For various tasks, we also recommend the following equipment:
Nitrogen nitrogen gas bottle for pressure tests
Refrigerant scale for collection or disposal
Vacuum pump before recommissioning
In addition to fresh refrigerant, there is much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Refrigerant Scale
R 760,00*
BIMdepot Filter:
Air Handling Technology
This scale is used by our technicians to accurately measure the amount of refrigerant during both filling and disposal processes.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Vacuum pump after pressure testing
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
BIMdepot | Operational Vacuum Pump
R 1 160,00*
BIMdepot Filter:
Air Handling Technology
This vacuum pump is used by our technicians to evacuate each refrigerant cycle once new installed for commissioning or after replacement of fitted appliances.
For various tasks, we also recommend the following equipment:
Recycled bottle
Refrigeration fitting
Disposal station
Nitrogen Nitrogen for pressure testing before filling refrigeration circuits
Fresh refrigerant and much more...
If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.
Tip
BIMpilot | Analysis Kit Surface Contact Samples
R 2 200,00*
Language Version:
English
Contact Sample Set for Professionals: Contains 5 round agar plates in Petri dishes for surface sampling – ideal for air filters, condensate trays, interior walls of air-conducting components, food processing areas, or refrigeration units. Sample evaluation and the creation of a test report (e.g., according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user.
Note: Additional sets are required for more than 4 samples.
Germ and Bacteria Analysis
Most bacteria grow as red colonies on TTC agar – occasionally fungi and yeasts also grow. Colorless colonies are also included in the analysis. The decisive factor is the colony-forming units (CFU), not their size. If the bacterial count is high, the coating may appear uniformly colored or colorless if there is a high level of growth. Comparison with a fresh medium helps avoid misinterpretations.
Guideline values:
<104 CFU/ml = low contamination
104 – 106 CFU/ml = moderate
>106 CFU/ml = high, unacceptable
Important information
Sampling kit – no on-site service included.
Transport, consultation, action planning & Results discussion can be booked separately.
Longer stays require a separate booking.
Additional services are available via BIM Facility Management or Expert Report.
Additional costs can be viewed at BIMpilot.
Always professionally secure supply chains
For full process support, we recommend booking a BIM Facility Manager or VDI Hygiene Inspector (Mon-Thurs, 4 days/week).
Please note: Work equipment and travel expenses are not included – details can be found at BIMpilot or BIMservice.