Comprehensive BIM & Technical Services for Air Conditioning Systems

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort. Your Advantage: A Sustainable Supply Chain Without Additional Effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Plannable operations without additional coordination effort Charging Times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort. Your Advantage: A Sustainable Supply Chain Without Additional Effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Plannable operations without additional coordination effort Charging Times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

Measurement, optimization or consulting? We offer this service on-site or remotely for one hour, tailored to your specific needs. What are the advantages of a BIMcare™ maintenance contract? After maintenance is performed under BIMcare™, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned and BIMcare™ is subsequently continued continuously for at least 12 months. Even without BIMcare™, a cost-effective remote service is available via WhatsApp. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces. Hygiene assurance for building services systems and food processing surfaces Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials: Advantages: Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise. Sampling and risk assessment: Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators. Documentation and recurring inspections: The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling. Visual inspection and testing of external work environments: A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors. With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company. Are maintenance contracts necessary? We offer this without restrictive contracts in the BIMcare™ category. Always fully configure supply chains This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

The engineer for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly air handling in many aspects. System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes: Accurate leak tests: We perform precise leak tests to ensure the proper functioning and longevity of your systems. Adjustment and factory filling of the refrigeration circuit: Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance. Personal protection and environmental protection measures: We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation. Why Choose Us? We are internationally recognized for our contributions to environmental protection and safety in building operations. Expertise and access to AI technologies: Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise. Always fully configure supply chains This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

The engineer in building's ventilation for supply and exhaust air handling units. This ensures draft-free and freshly filtered indoor air. Expertise for optimal indoor air quality Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades. Efficient air filtration for clean indoor air Intelligent ventilation concepts for energy savings Professional maintenance and repair for maximum operational reliability BIM-Service – for air quality that impresses. Always fully configure supply chains This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™. BIMcare™ customers automatically receive a discount on this item.

Unknown fault with air conditioning? With this diagnostic, we will find the cause within 3 hours for quick repairs. The advantage of a maintenance contract After maintenance has been carried out as part of BIMcare™, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™-customers automatically receive a discount on this item.

Any dispute with building technology defects? We have solutions ready within 3 hours and estimate the expenses to fix it. How does building technology defect analysis work? We inspect, measure, perform endoscopy, strip down, and walk through the building to find the best way to locate the causes and develop sound technical action plans. We understand that not everything can be done in just a few hours, but a structured and precise damage analysis lays the foundation for a sustainable solution. What advantage does BIM Facility Management provide? With continuous use of our Facility Management or as part of BIMcare™ maintenance, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned or BIMcare™ and Facility Management are subsequently continued for at least 12 months without interruption. We always recommend an appropriate BIM model of your building. Always fully configure supply chains This is ideally only for a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™-customers automatically receive a discount on this item.

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The commissioning package includes the deployment of one technician from our service centre for a maximum of 2 hours. It includes one round trip for curbside delivery of the air conditioning units and a separate round trip on the following day for commissioning. Installation must be carried out by a licensed contractor appointed by the customer, who assumes warranty responsibility. Without proof of such contractor, delivery will not take place. We reserve the right to store the delivery subject to a 10% unit price charge. Scope of the commissioning package Technical deployment: 1 technician for up to 2 hours Travel costs: Included up to 100 km one way; additional kilometres charged Accommodation: Included Material delivery: Curbside delivery; internal transport by licensed contractor Commissioning: Refrigerant line flaring, electrical connection, system evacuation, leak testing in accordance with applicable regulations and functional testing. Performed exclusively by us under this package. Additional services (optional, at extra cost) Electrical connection (RCD, circuit breakers, etc.) Distance beyond 100 km Overnight surcharges for long distances or multi-day deployments Special works (repeat commissioning appointment) WLAN or KNX integration Provision of scaffolding from 2 m working height or lifting platforms Provision of personnel for material handling Returns and withdrawal As the air conditioning units are configured according to customer specifications, returns or refunds are excluded until proof of installation by a licensed contractor is provided. Delivery is suspended or stored at cost upon request. Withdrawal rights are excluded. Customers are required to provide proof prior to delivery. Delivery and commissioning take place only after successful verification. Emergency installation notice In absolute emergencies, installation may be carried out by us at additional cost upon explicit order. Commissioning is carried out exclusively by us in accordance with applicable regulations. Installation remains the responsibility of the licensed contractor.

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 12 hours of team effort (2 technicians) Travel: up to 30 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 30 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 14 hours of team effort (2 technicians) Travel: up to 30 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 30 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 16 hours of team effort (2 technicians) Travel: up to 30 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 30 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 16 hours of team effort (2 technicians) Travel: up to 60 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 60 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 100 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 100 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 150 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 150 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 200 km (one way) Accomodation: included Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 200 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 300 km (one way) Accomodation: included Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 300 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 400 km (one way) Accomodation: included Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 400 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

Our sustainable and customer-friendly solution enables the safe and efficient transport of people and permitted goods on international flight routes and within Europe. We combine speed, environmental responsibility, and legal certainty for your transport needs. What we transport Specialists for assignments at the destination Permitted goods, spare parts, and documents Other non-perishable, non-hazardous goods compliant with international aviation regulations What we do not transport For safety and legal reasons, we cannot transport the following goods: Animals of any kind Chilled or frozen goods Hazardous or legally prohibited goods Batteries (e.g. LiFePO4) or other lithium batteries in large quantities Liquids exceeding permitted air transport limits Gases, pressure containers, or compressed substances Explosive, flammable, or chemically aggressive substances Other goods prohibited under international aviation or safety regulations Customer notice: Pickup at destination Our service exclusively includes, depending on the option, national or international air transport. Delivery within the destination country or domestic transport at the destination is not included. The customer must collect the goods at the destination unless local transport has been booked. Freight is only transported from our warehouse on one route. Mobility at the destination, storage, parking, transfer, and accommodation costs are optional and must be borne and arranged by the customer. The total price depends on the selected options. Your advantage Fast and predictable availability of specialists and goods Sustainable, efficient, and legally compliant execution English as the business language for international operations Total price composition Description Price in EUR excl. VAT 1. Mobility at departure location - no Km 200.00 2. Mobility at destination - no Km 200.00 3. Non-EU round-trip ticket per person 2,100.00 4. EU round-trip ticket per person 300.00 5. One-way surcharge per 31 kg freight 300.00 6. Parking / transfer costs per location per vehicle/month if required 150.00 7. Overnight stay per night / person 120.00