BIMaudit™ – Experts in Building Technical Installations for Industry, SMEs and Healthcare

Unknown fault with air conditioning? With this diagnostic, we will find the cause within 3 hours for quick repairs. The advantage of a maintenance contract After maintenance has been carried out as part of BIMcare™, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™-customers automatically receive a discount on this item.

Unknown fault with air supply systems? We can find problems on site within 3 hours to generate quick repair quotes and estimate the range of spare parts. The advantage of a maintenance contract After maintenance has been carried out as part of BIMcare™, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™-customers automatically receive a discount on this item.

Any dispute with building technology defects? We have solutions ready within 3 hours and estimate the expenses to fix it. How does building technology defect analysis work? We inspect, measure, perform endoscopy, strip down, and walk through the building to find the best way to locate the causes and develop sound technical action plans. We understand that not everything can be done in just a few hours, but a structured and precise damage analysis lays the foundation for a sustainable solution. What advantage does BIM Facility Management provide? With continuous use of our Facility Management or as part of BIMcare™ maintenance, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned or BIMcare™ and Facility Management are subsequently continued for at least 12 months without interruption. We always recommend an appropriate BIM model of your building. Always fully configure supply chains This is ideally only for a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™-customers automatically receive a discount on this item.

Unknown fault in the control cabinet? We will create a diagnosis within 3 hours to solve the problem and get it fixed soon. What are the advantages of a maintenance contract for digital controls? After maintenance has been carried out as part of BIMcare™, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

Problems with your potable drinking water system? We care for solutions within 3 hours and estimate the repair costs to get it fixed. What is the advantage of maintenance contracts? If we maintain your system as part of BIMcare™, we will reimburse you 50% of the costs of this fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideal for a 4-day week of Montag bis Donnerstag. This is not an All-Inclusive Package, Travel Expenses and Labor Materials since they cannot be funded under BIMdepot™, BIMcare™, BIMpilot™ or BIMphase™. BIMcare™-Customers automatically get a price quote after the diesen Article.

Measurement, optimization or consulting? We offer this service on-site or remotely for one hour, tailored to your specific needs. What are the advantages of a BIMcare™ maintenance contract? After maintenance is performed under BIMcare™, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned and BIMcare™ is subsequently continued continuously for at least 12 months. Even without BIMcare™, a cost-effective remote service is available via WhatsApp. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

This fork lift is used by our technician for the professional installation and positioning of heavy or bulky system components, particularly on façades or in ground-level outdoor areas. The maximum lifting height is 2.52 m. Installation tasks that cannot be safely or economically reached with this lift generally require the use of a suitable mobile crane. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This sampling kit is used for structured detection of key indoor pollutant groups and forms the basis for comprehensive laboratory analysis of indoor air quality in residential, office, and work environments without a known single source. The product includes sampling technology and laboratory analysis only. On-site sampling, coordination, assessment, or report preparation is not part of the scope of delivery. Analytical parameters Formaldehyde from wood-based materials and furniture Wood preservatives (e.g. PCP, Lindane, DDT, PCB, Chlorthalonil, Endosulfans) Moulds and yeasts (including non-visible contamination) VOC & solvents (e.g. benzene, toluene, alcohols, aldehydes, ketones) Plasticisers (e.g. DEP, DIBP, DBP, BBP, DEHP) Asbestos fibres (optional fibre analysis using specialised methods) Sampling principle Air samples are collected using a leased electronic sampling pump onto adsorption tubes. Sampling is standardised and designed for rooms up to approx. 100 m². Additionally, mould detection is carried out using sedimentation methods including an outdoor air reference sample. Laboratory analysis Gas chromatographic VOC analysis according to VDI-oriented procedures Scanning electron microscopy fibre analysis (e.g. SEM/EDX in case of asbestos suspicion) Microbiological testing (moulds & yeasts) Comparison with guideline and assessment values Evaluation (separately defined service scope) Laboratory report with structured measurement data - included Technical evaluation of results - optional Optional cause and mitigation interpretation by specialist bodies - optional Scope of delivery General: Laboratory analysis of all commissioned parameters Standardised result documentation Indoor air adsorption sampling: Complete sampling kit incl. leased sampling pump Special adsorption tubes for VOC, PAHs, formaldehyde, solvents Mould detection (indoor air) Culture media in dishes for two rooms Culture media for outdoor air reference sample Asbestos and mineral fibre detection Surface imprint sample on a specialised sampling carrier Note Leased sampling pump is included in delivery Overdue return may incur additional charges Results are for technical assessment only and do not replace medical diagnosis BIMdepot™ process logic For structured project workflows, the involvement of a BIM Facility Manager or a VDI Hygiene Inspector as a qualified indoor air specialist is recommended. Laboratory analyses are performed independently by specialised analysis partners.

This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads. For various tasks, we also recommend the following equipment: If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This mobile scaffold is used by our technician for the professional installation of various system components, most commonly on façades, hard-to-access areas, or roof sections. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, it should normally be shipped with the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company in the field of sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This personal protective equipment, consisting of a fall arrest harness and accessories, is used by our technician for professional inspection, supervision, work, installation and positioning on roofs or during work at height, mainly on façades, roofs, access balconies, balconies, balustrades or industrial facilities. Anything that cannot be reached safely or economically usually requires the use of a suitable lifting platform or aerial work platform. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with Regulation 303/2008 on chemicals and climate protection and Implementing Regulation (EU) 2015/2066.

Portable multifunction dosimeter for detecting ionizing radiation (beta, gamma, X-ray). Intended for internal use and supervised external operations. Real-time measurement, data logging and multi-alarm system compliant with common standards. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. You are advised to order the operational use of personal protection equipmemnt a OHS Occupational Health and Safety Manager from us, see under category BIMservice.

This super assembly lift is used by our technician as a platform carrier for the professional installation of various system components, particularly HVAC and ventilation equipment beneath unfinished ceilings. The standard lifting height is up to 3.80 m. For installing heavier loads on façades, an additional fork lift with a lifting height of up to 2.51 m is available. For working heights exceeding 2 m, we generally recommend ordering suitable scaffolding. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

The BIMdepot drinking water test kit enables professional sampling and laboratory analysis of drinking water at one defined sample-taking point. Samples are collected in certified containers and sent to an accredited laboratory for analysis and evaluation. The results provide a reliable basis for assessing water quality and potential contamination from chemical or biological parameters. Sampling and evaluation should be performed by qualified professionals. 🔬 Analysis scope Depending on the selected variant, the following parameters are analyzed: Chemical parameters: Lead (Pb), Nickel (Ni), Copper (Cu) Biological parameters: Coliform bacteria, Enterococci, Pseudomonas aeruginosa, Legionella 📦 Variant overview Direct | Heavy metals & chemistrySelf-sampling for chemical analysis Direct | Bacteria & microbiologySelf-sampling for microbiological testing Direct | Full analysisSelf-sampling for combined chemical and biological analysis Accredited & supervised | Heavy metals & chemistryAccredited sampling with coordinating support for heavy metals Accredited & supervised | Bacteria & microbiologyAccredited sampling with coordinating support for hygiene Accredited & supervised | Full analysisAccredited sampling with coordinating support for complete water analysis ⚠️ Important notes Valid for one sampling location only. Additional kits required for multiple locations. Laboratory shipping included unless otherwise stated. Coordinating On-site services available separately. 📊 Results & Benefits Laboratory analysis provides detailed measurements and a verifiable assessment of water quality. It serves as a basis for professionals to initiate or maintain technical measures, optimize hygiene, or provide legal documentation. Completely configure supply chains For complete implementation, we recommend booking a coordinating BIM Facility Manager or VDI Hygiene Inspector as a certified professional, typically for 4 days per week (Monday to Thursday). Note: This offer is not all-inclusive. Travel expenses and equipment are not included and can be booked optionally in the categories BIMconnect, BIMpilot, or BIMservice.

BIMdepot contact and swab sampling set for surface analysis professionals: Includes 5 round agar plates in Petri dishes and 5 swabs for surface sampling – ideal for air filters, condensate trays, interior walls, air-handling components, food areas, or refrigeration units. Sample evaluation and report generation (e.g. according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user. Swabs are recommended for hard-to-reach or uneven surfaces. Note: More than 5 samples require additional kits. Microbial and bacterial analysis On TTC agar, most bacteria grow as red colonies – some fungi and yeasts may also appear. Colorless colonies are also counted. The key factor is Colony Forming Units (CFU), not colony size. At high contamination levels, the surface may appear uniformly colored or colorless due to heavy growth. Comparison with a fresh medium helps avoid misinterpretation. Reference values: < 10⁴ CFU/ml = low contamination 10⁴ – 10⁶ CFU/ml = moderate contamination > 10⁶ CFU/ml = high, unacceptable contamination Important notes This analysis kit does not include PPE, on-site sampling, or services. Transport, consulting, action planning & result interpretation are booked separately. Coordinated or extended deployments require separate booking. Create professional supply chains For full process and sampling support, booking a coordinating BIM Facility Manager or VDI hygiene inspector is recommended (Mon–Thu, 4 days/week). Note: Work equipment and travel costs are not included – see BIMconnect, BIMpilot or BIMservice.