Climate Components & Accessories

High-quality components and accessories for professional air conditioning installations. Select a subcategory to identify the right solution for your specific project.

Professional Solutions for Air Conditioning & Refrigeration

This section offers a curated selection of installation components — not only complete sets. Ideal for professional contractors and technical specialists.

coolenvi-BIMservice-consulting-female-recommendation.png?ts=1764415523

Installation Sets

Complete installation kits for fast and reliable AC mounting.

Condensate Drainage

Efficient solutions for safe and clean condensate removal.

Refrigeration Pipes & Fittings

Durable pipes and fittings for modern refrigeration systems.

Copper Flare Gasket 6mm - for refrigeration systems

R 10,15* listing.beforeListPrice R 10,15* listing.afterListPrice (0.02% saved)

Copper Flare Gasket 10mm - for refrigeration systems

R 13,54*

Copper Flare Gasket 12mm - for refrigeration systems

R 13,54*

Copper Flare Gasket 16mm - for refrigeration systems

R 13,54*

Copper Flare Gasket 18mm - for refrigeration systems

R 18,05*

Cu-Arc 5002A 90° i/i 15mm

Conex-Bänninger 5000 series solder and transition fittings are universally applicable and manufactured from oxygen-free copper CU-DHP (material number CW024A according to DIN CEN/TS 13388). They are available in various designs and sizes (6 to 108 mm).Highly corrosion-resistant and dezincification-resistant. Also suitable for use with aggressive media (e.g., seawater).The capillary solder fittings comply with DIN EN 1254 and the DVGW regulations GW 6 and G 8, as well as the quality guidelines.

R 56,02* listing.beforeListPrice R 56,21* listing.afterListPrice (0.34% saved)

Cu-Arc 5002A 90° i/i 16mm

R 60,16* listing.beforeListPrice R 65,42* listing.afterListPrice (8.05% saved)

Cu-Arc 5002A 90° i/i 18mm

R 70,50* listing.beforeListPrice R 77,27* listing.afterListPrice (8.76% saved)

Cu-Arc 5002A 90° i/i 22mm

R 74,82* listing.beforeListPrice R 125,40* listing.afterListPrice (40.33% saved)

Cu copper tube in straight lengths, hard-drawn 6 × 1 mm – length = 5 m

Item - Quantity: 5m

Copper Pipe 6x1mm. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.

Variants from R 159,80*

R 702,37* listing.beforeListPrice R 1 404,36* listing.afterListPrice (49.99% saved)

Cu copper tube in straight lengths, hard-drawn 10 × 1 mm – length = 5 m

Item - Quantity: 5m

Copper Pipe 10x1mm. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.

Variants from R 235,00*

R 1 093,41* listing.beforeListPrice R 2 186,44* listing.afterListPrice (49.99% saved)

LEAK LOCK® – Sealing Paste for Pipe Connections

The highly flexible, resin-based paste reliably seals threaded and flange connections as well as gasket and mating surfaces. Ideal for new installations, leak tests, repairs, or warranty replacements. LEAK LOCK® adheres to metal and plastic surfaces, fills cavities, and withstands extreme vibrations, temperatures from -73°C to +204°C, and pressures up to 688 bar. It reliably seals chemicals, refrigerants, petroleum products, gases, steam, water, and compressed air. Clean surfaces with alcohol before use. Content: 40 g

R 240,64*

Cu copper tube in straight lengths, hard-drawn 12 × 1 mm – length = 5 m

Item - Quantity: 5m

Copper Pipe 12x1mm. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.

Variants from R 291,40*

R 1 328,41* listing.beforeListPrice R 2 656,44* listing.afterListPrice (49.99% saved)

PVC connection 6mm (Pkg=5pcs)

Xtra PVC Hose connector 6mm

R 347,42*

Pre-Insulated Double Cu-Pipe 6/10x1mm 20m

Item - Quantity: 1m

Pre-Insulated Double Copper Pipe 6/10x1mm 20m Bundle High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps. Properties: Insulation vapor diffusion resistance factor: ≥ 11000 μm Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0 Odor: neutral Chemical resistance: excellent Resistance to fungal and pest infestation: excellent Toxicity in case of fire: none PE protective film, color: white, embossed Sound insulation up to 30 dB of flow and contact noise for metal pipes Dimensions Outer diameter: x wall thickness 6 mm x 1 mm / 10 mm x 1 mm Insulation Outer diameter: x insulation thickness 26 x 9 / 28 x 9 mm General Design: Double pipe Construction type Copper pipe in coils Pipe size: metric Bundle: per package 1 pc. Roll length 20 m Type: TWINSPLIT 6/10 Thermal conductivity: 0.036 W/(m*K) Pressure Maximum: operating pressure 183/91 barTemperature data: Ambient temperature -45 to +90 °C

R 347,80*

Cu copper tube in straight lengths, hard-drawn 15 × 1 mm – length = 5 m

Item - Quantity: 5m

Copper Pipe 15x1mm. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.

Variants from R 347,80*

R 1 675,46* listing.beforeListPrice R 3 351,10* listing.afterListPrice (50% saved)

Cu copper tube in straight lengths, hard-drawn 16 × 1 mm – length = 5 m

Item - Quantity: 5m

Copper Pipe 16x1mm. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.

Variants from R 357,20*

R 1 789,01* listing.beforeListPrice R 3 577,64* listing.afterListPrice (49.99% saved)

Funnel Siphon Polypropylen white

Hygienic - Professional - Simply Practical. Air conditioning units can only capture condensate or residual water with this funnel siphon, which directs it cleanly and separately from the sewage system into the drain. This oval funnel is made of durable white plastic and can be installed tightly against almost any wall. Its narrow and short shape allows installation in hard-to-reach areas that must remain accessible for maintenance purposes. Suitable for the standard DN 50 outlet. The adjustable range of 220 to 340 mm allows for easy, precise mounting at the correct height. The product is practically pre-assembled and includes the dip tube, wall pipe, and funnel. The bend can be easily removed for cleaning and reassembled. Secure tightening is done by hand using sturdy, craftsmanship-grade union nuts. The high-quality plastic is break-resistant, resistant to household cleaning agents, and features smooth, pore-free surfaces. Please note: This siphon is suitable as a replacement for ball siphons that can handle different overpressure or underpressure situations. Purpose: For catching residual water / leak water Material: PP - Polypropylene Color: White Nominal size DN outlet: DN 50 Temperature resistance min./max.: 0 to 100 °C Short-term maximum temperature resistance: 130 °C Height min./max.: 220-340 mm Height 2: 124 mm Length: 300 mm

R 397,43*

Solder Flare Adapter FSA 26M 6mm 023U8041

Solder adapter FSA 26M 6 mm. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.

R 487,30*

Solder Flare Adapter FSA310M 10mm 023U8043

Solder adapter FSA310M 10mm 023U8043. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.

R 582,05*

ASPEN Condensate Pump PERI – Replacement Hose MS-1633

Original MS-1633 replacement hose for peristaltic kneading pumps of the ASPEN Condensate Pump PERI. Easy swap, reliable performance, durable spare part.

R 597,84*

Solder Flare Adapter FSA412M 12mm 023U8045

Solder adapter FSA412M 12mm 023U8045. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.

R 690,34*

Solder Flare Adapter FSA516M 16mm 023U8047

Solder adapter FSA516M 16mm 023U8047. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.

R 749,93*

Solder Flare Adapter FSA618M 18mm 023U8009

Solder adapter FSA618M 18mm 023U8009. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.

R 1 163,53*

Reinforced PVC Hose ACC00914 – 50 m Roll, Inner Diameter 6 mm

Item - Quantity: Roll

Transparent, reinforced PVC hose for connecting pumps to condensate drainage. Flexible, durable, and suitable for temperatures from -20 to +60 °C. Perfect for commercial and domestic applications. Technical Data: Type: ACC00914 Design: Reinforced PVC hose Roll length: 50 m Inner diameter: 6.3 mm Outer diameter: 11.4 mm Max. operating pressure: 22 bar Total weight: 4.5 kg / 50 m Operating temperature: -20 to +60 °C Ideal for safe and flexible pump connections to condensate drains, offering high durability and long service life.

Content: 1 lm (R 118 421,00* / 50 lm)

Variants from R 71,44*

R 2 368,42*

ASPEN Condensate Pump Silent+ Mini Lime Slimline – Signal White

The new and improved 5th generation Silent+ Mini Lime is the quietest corner duct pump on the market at just 16 dB(A). Quick, easy, and flexible to install with proven technology, high flow performance, and low power consumption. Maximum performance, high reliability, and energy efficiency at near-silent operation. Ideal for comfort and commercial areas where low noise is critical. Features: Backward-compatible Plug & Play cable Compatible with all common duct systems Fast installation – no vibration damper or anti-siphon valve required Flow rate up to 40 l/h with up to 10x lower power consumption Suitable up to 46 kW / 157000 Btu/h Vibration damper for quiet operation Pump can be installed in duct angle, left or right Various duct systems available Easy maintenance Included: Silent+ Mini Lime pump with 1.5 m fixed power cable Construction with vibration damper and backflow protection 500 mm inlet hose (14 mm ID) 40 mm PVC vent hose (6 mm ID) Pump angle 800 mm straight duct (not for OEM) Seal and ceiling penetration Inlet adapter Mounting kit Installation manual

R 3 365,20*

Pre-Insulated Double Cu-Pipe 6/12x1mm 20m

Item - Quantity: Roll

Pre-Insulated Double Copper Pipe 6/12x1mm 20m Bundle High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps. Properties: Insulation vapor diffusion resistance factor: ≥ 11000 μm Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0 Odor: neutral Chemical resistance: excellent Resistance to fungal and pest infestation: excellent Toxicity in case of fire: none PE protective film, color: white, embossed Sound insulation up to 30 dB of flow and contact noise for metal pipes Dimensions Outer diameter: x wall thickness 6 mm x 1 mm / 12 mm x 1 mm Insulation Outer diameter: x insulation thickness 24 x 9 / 30 x 9 mm General Design: Double pipe Construction type Copper pipe in coils Pipe size: metric Bundle: per package 1 pc. Roll length 20 m Type: TWINSPLIT 6/12 Thermal conductivity: 0.036 W/(m*K) Pressure Maximum: operating pressure 183/91 barTemperature data: Ambient temperature -45 to +90 °C

Variants from R 387,28*

R 5 489,60*

Coolenvi™ - Supplementary SET for Heavy-duty on ETICS

Item - Quantity: 1 Pc

Installation set for anchoring of usual two-point consoles with supporting trusses, primarily for installing appliances in commercial use on insulated facades with External Thermal Insulation Composite System. This SET is consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approximately 12 kW and thickness of insulation of upt o 200mm max. Installation Set – For ETICS thickness from 100 - 200 mm: DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0903450205 – 3x Allround Injection Mortar WIT-VM 250 – 420 ml DE-WU090344121 - 6x 12x50mm Sieve sleeve anchor - Perforated brickwork, aerated concrete DE-WU0905461016 - 6x M10x260mm Anchor rod for injection system DE-WU041610 – 12x M10x30mm fender washer DE-WU031710 – 12x hex nuts M10 DE-WU0911100200 - 6x Distance Spacer Installation AMO MAX

R 5 649,59*

ASPEN Condensate Pump PERI PRO+

The new Peri Pro+ is a float-operated condensate pump offering exceptional reliability with an industry-leading 5-year warranty*. Based on stepper motor technology and software control, this version features intelligent pumping technology similar to the latest mini-pumps – always with the goal of minimizing noise and hose wear. The Peri Pro+ is ideally suited for split systems with high walls, ducted units, and floor-standing and chassis units. It's perfect for hotel rooms and other remote installation locations. *Hose not included and subject to proper installation and operation.

R 8 685,60*

Coolenvi™ - Mounting SET 3m I/O Residential Devices

Item - Connection Length: 3m | Item - Installation SET Variant: For Facades up to 3.5 kW

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 3 m control cable 5 x 1.5 mm DE-WU097366090 – 3 m cable duct 60 x 90 mm, white DE-HS760002001 – 3 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 20x TX screws 4.5x60mm DE-WU590620635 - 20x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 3m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips

R 8 774,52*

Coolenvi™ - Mounting SET 3m I/O Commercial Devices

Item - Connection Length: 3m | Item - Installation SET Variant: For Facades 3.6 - 14.0 kW

Installation kit for small and large split air conditioning systems, primarily for commercial applications, consisting of the following individual components in the corresponding quantities and for a maximum rated air conditioning output of approximately 12 kW. Installation set – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy-Mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 3 m control cable 5 x 1.5 mm DE-WU097366090 – 3 m cable duct 60 x 90 mm, white DE-HS760002001 – 3 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 20x TX screws 4.5x60mm DE-WU590620635 - 20x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4016 - 3m CU double pipe 10, 16mm insulated DE-S282.0541 - 2x solder sockets 10 mm DE-S282.0543 – 2x solder sockets 16 mm 1x nitrogen flat rate, soldering gas, sealant Mounting kit variant 1 – For facades with a cooling capacity over 3.5 kW: DE-WU0862009062 – 2x wall brackets 630 mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x bracket 45° DE-WU0862005326 – 2x retaining clips clamp DE-WU005791040 – 2x hexagon screw M10 DE-WU037110 – 2x hexagon nut M10 DE-WU590681266 – 6x Universal wall anchor 12 mm DE-WU019210100 – 6x Hex bolts M10x100 DE-WU041610 – 6x Washers M10 Mounting kit variant 2 – For floor or flat roof mounting: DE-LIN1229000 - 1x SET roof support beam 1000 mm DE-WU071392915 – 2x Construction site protection mats in strips

R 11 016,61*

Coolenvi™ - Mounting SET 5m I/O Residential Devices

Item - Connection Length: 5m | Item - Installation SET Variant: For Facades up to 3.5 kW

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 5 m control cable 5 x 1.5 mm DE-WU097366090 – 5 m cable duct 60 x 90 mm, white DE-HS760002001 – 5 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 5m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips

Variants from R 10 729,54*

R 11 517,26*

Coolenvi™ - Mounting SET 5m I/O Commercial Devices

Item - Connection Length: 5m | Item - Installation SET Variant: For Facades 3.6 - 14.0 kW

Installation set for small and large split air conditioning systems, primarily for residential use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick connectors DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x white acrylic sealant – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 5 m control cable 5 x 1.5 mm DE-WU097366090 – 5 m cable duct 60 x 90 mm, white DE-HS760002001 – 5 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 30x TX screws 4.5x60 mm DE-WU590620635 – 32x wall plugs 6 mm DE-WU0176203535 – 2x TX screws 3x35 mm DE-S321.4046 – 5 m CU double pipe 6, 12 mm insulated DE-S282.0540 – 2x solder sleeves 6 mm DE-S282.0542 – 2x solder sleeves 12 mm 1x nitrogen soldering gas (flat rate) content, sealant Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 - 2x wall bracket 630 mm DE-WU0862005006 – 2x end caps DE-WU0862009125 - 2x support beams 45° DE-WU0862005326 - 2x holding clamp M10 DE-WU005791040 - 2x hex screw M10 DE-WU037110 - 2x hex lock nut M10 DE-WU041610 - 6x body washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof installation: DE-LIN1229000 - 1x SET roof support beams 1000 mm DE-WU071392915 – 2x construction site protective mats (strips)

Variants from R 12 126,00*

R 12 943,80*

Coolenvi™ - Mounting SET 10m I/O Residential Devices

Item - Connection Length: 10m | Item - Installation SET Variant: For Facades up to 3.5 kW

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 10 m control cable 5 x 1.5 mm DE-WU097366090 – 10 m cable duct 60 x 90 mm, white DE-HS760002001 – 10 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 10m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips

R 15 112,76*

Coolenvi™ - Mounting SET 10m I/O Commercial Devices

Item - Connection Length: 10m | Item - Installation SET Variant: For Facades 3.6 - 14.0 kW

Installation set for small and large split air conditioning systems, primarily for commercial use, consisting of the following components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick connectors DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x white acrylic sealant – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 12x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 10 m control cable 5 x 1.5 mm DE-WU097366090 – 10 m cable duct 60 x 90 mm, white DE-HS760002001 – 10 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 30x TX screws 4.5x60 mm DE-WU590620635 – 32x wall plugs 6 mm DE-WU0176203535 – 2x TX screws 3x35 mm DE-S321.4016 – 10 m CU double pipe 10, 16 mm insulated DE-S282.0541 – 2x solder fittings 10 mm DE-S282.0543 – 2x solder fittings 16 mm 1x nitrogen soldering gas (flat rate) content, sealant Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 – 2x wall brackets 630 mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x support beams 45° DE-WU0862005326 – 2x holding clamp M10 DE-WU005791040 – 2x hex screws M10 DE-WU037110 – 2x hex lock nuts M10 DE-WU041610 – 4x body washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof installation: DE-LIN1229000 - 1x SET roof support beams 1000 mm DE-WU071392915 – 2x construction site protective mats (strips)

Variants from R 16 656,80*

R 17 481,18*

Coolenvi™ - Mounting SET 15m I/O Residential Devices

Item - Connection Length: 15m | Item - Installation SET Variant: For Facades up to 3.5 kW

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 15 m control cable 5 x 1.5 mm DE-WU097366090 – 15 m cable duct 60 x 90 mm, white DE-HS760002001 – 15 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 15m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips

R 19 552,56*

Coolenvi™ - Mounting SET 15m I/O Commercial Devices

Item - Connection Length: 15m | Item - Installation SET Variant: For Facades 3.6 - 14.0 kW

Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick couplings DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 12x cable ties KBL 1 polyamide with plastic tongue DE-HS1001 – 15 m control cable 5 x 1.5 mm² DE-WU097366090 – 15 m cable trunking 60 x 90 mm, white DE-HS760002001 – 15 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 40x TX screws 4.5x60mm DE-WU590620635 – 42x wall plugs 6mm DE-WU0176203535 – 2x TX screws 3x35mm DE-S321.4016 – 15 m CU double pipe 10,16mm insulated DE-S282.0541 – 2x solder fittings 10mm DE-S282.0543 – 2x solder fittings 16mm 1x nitrogen soldering gas (flat rate), sealant included Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 – 2x wall brackets 630mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x support bars 45° DE-WU0862005326 – 2x retaining clips M10 DE-WU005791040 – 2x hex screws M10 DE-WU037110 – 2x hex lock nuts M10 DE-WU041610 – 4x fender washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof mounting: DE-LIN1229000 - 1x SET roof support beams 1000mm DE-WU071392915 – 2x construction protection mats (strips)

Variants from R 21 262,61*

R 22 089,81*

Coolenvi™ - Mounting SET 20m I/O Residential Devices

Item - Connection Length: 20m | Item - Installation SET Variant: For Facades up to 3.5 kW

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 20 m control cable 5 x 1.5 mm DE-WU097366090 – 20 m cable duct 60 x 90 mm, white DE-HS760002001 – 20 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 20m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips

R 23 992,18*

Coolenvi™ - Mounting SET 20m I/O Commercial Devices

Item - Connection Length: 20m | Item - Installation SET Variant: For Facades 3.6 - 14.0 kW

Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick couplings DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 20x cable ties KBL 1 polyamide with plastic tongue DE-HS1001 – 20 m control cable 5 x 1.5 mm² DE-WU097366090 – 20 m cable trunking 60 x 90 mm, white DE-HS760002001 – 20 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 50x TX screws 4.5x60mm DE-WU590620635 – 52x wall plugs 6mm DE-WU0176203535 – 2x TX screws 3x35mm DE-S321.4016 – 20 m CU double pipe 10,16mm insulated DE-S282.0541 – 2x solder fittings 10mm DE-S282.0543 – 2x solder fittings 16mm 1x nitrogen soldering gas (flat rate), sealant included Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 – 2x wall brackets 630mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x support bars 45° DE-WU0862005326 – 2x retaining clips M10 DE-WU005791040 – 2x hex screws M10 DE-WU037110 – 2x hex lock nuts M10 DE-WU041610 – 4x fender washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof mounting: DE-LIN1229000 - 1x SET roof support beams 1000mm DE-WU071392915 – 2x construction protection mats (strips)

Variants from R 25 887,41*

R 26 695,81*

Insulation for Air Conditioning & Refrigeration

Premium insulation materials are essential to prevent condensation, energy loss, and system inefficiencies. Here you can browse a selection of diffusion-proof pipe insulation and suitable accessories.

New

KAIFLEX Continuous Roll KK+ PL19-R S3 - 19 x 1000 x 6000 mm - 6 sqm

Item - Quantity: 1 Pc

Kaiflex KKplus is a highly flexible foam made from synthetic rubber, FEF (Flexible Elastomeric Foam). It reliably prevents condensation and sustainably reduces energy losses. The closed-cell structure provides permanent vapor barrier properties, effectively stopping vapor diffusion and ensuring consistent insulation performance throughout the system's lifetime. Suitable for pipes, fittings, elbows, and similar components in refrigeration, air conditioning, and process engineering systems to save energy and prevent condensation.

R 1 786,75*

Aluminium Adhesive Tape for Pipe Insulation 75mm 45m Roll

Item - Quantity: 1 Pc

Aluminium adhesive tape, specially designed for sealing joints and connections on insulated copper pipes. The standard fixing tape is easy to apply and provides long-lasting sealing and protection against moisture, dust, and corrosion. Ideal for installations in heating, air-conditioning, and refrigeration systems. Material: Aluminium Dimensions: 75 mm x 0.003 mm, 45 m per roll Weight: 0.7 kg per roll Unit: Pc. Perfect for long-lasting sealing of pipe joints and insulation

R 284,26* listing.beforeListPrice R 291,40* listing.afterListPrice (2.45% saved)

K-FLEX ST - ELASTOMER ADHESIVE TAPE B1 3 MM X 50 MM X 15 M

Item - Quantity: 1 Pc

Black, closed-cell elastomer adhesive tape (K-FLEX ST elastomer for cold insulation). Self-adhesive backing with a mesh structure and release liner. For seam covering/bonding in all applications with elastomer insulation materials (e.g., on pipes, ducts, containers, valves, molded parts) for energy savings and/or to prevent condensation.

R 375,62*

K-FLEX FRIGO ST 13 X 18 MM ENDLESS HOSE

Item - Quantity: 1 Pc

Kaiflex ST is a flexible, closed-cell, elastomeric insulation material that reliably prevents the formation of condensation and reduces energy losses. The closed-cell structure acts as a permanent vapor barrier, effectively stopping vapor penetration and thus ensuring reliable insulation performance throughout the system's service life. Kaiflex ST is self-extinguishing, does not conduct fire, and does not drip. Thanks to its sound-reducing properties, dust- and fiber-free structure, and antimicrobial finish, Kaiflex ST is particularly suitable for use in public, commercial, and industrial buildings. Closed-cell with vapor barrier Corrosion-resistant Excellent thermal values minimize energy losses Flexible and fiber-free (for high hygiene requirements) Antimicrobial finish

Content: 15 lm (R 122,06* / 1 lm)

R 1 830,93*

K-FLEX FRIGO ST 13 X 28 MM ENDLESS HOSE

Item - Quantity: 1 Pc

Content: 10 lm (R 183,09* / 1 lm)

R 1 830,93*

K-FLEX FRIGO ST 13 X 10 MM ENDLESS HOSE

Item - Quantity: 1 Pc

Content: 23 lm (R 84,78* / 1 lm)

R 1 949,94*

K-FLEX FRIGO ST 13 X 12 MM ENDLESS HOSE

Item - Quantity: 1 Pc

Content: 18 lm (R 108,33* / 1 lm)

R 1 949,94*