Sanitary & Drinking Water Facilities – Technical Services

Coolenvi™ delivers expert technical services for sanitary and drinking water facilities across South Africa. BIMservice™ - We ensure hygiene, reliability, and long-term performance through maintenance, repairs, and protective measures.

coolenvi-BIMservice-consulting-female-recommendation.png?ts=1764251300

BIMpilot | Business trip in Western Cape

Your next Service-Hub: George 20/40 Km

The climate-neutral arrival and departure for customer service in South Africa, Western Cape. Customer-friendly and environmentally friendly for the country. Why arrival and departure is a business trip Every business trip is part of an environmentally friendly supply chain, so our technicians can be on-site quickly and sustainably: Select the distance for arrival and departure Select charging station Travel and charging times are included Loading times (at approx. 25 kWh/100 km) Spacing Directions Total AC3.7 kW/1P22 hours at0-100% AC7.4 kW/1P11 hours at 0-100% DC100 kW40 min. at0-100% Up to 50 km 100 km 7 h 3:30 h 0:40 h 51-100 km 200 km 14 h 7 h 0:50 h 101-150 km 300 km 20 h 10:30 h 1 h 151-200 km 400 km 26:40 h 14 h 1:30 h 201-250 km 500 km 33:30 h 18 h 2 h 251-300 km 600 km 40 h 21 h 2:30 h 301-500 km 1000 km 67 h 35 h4 h 501-600 km 1200 km 80 h 41:30 h 4:30 h 601-800 km 1600 km 107 h 55 h 5:30 h 801-1000 km 2000 km 133 h 69 h 8 h

Variants from R 10,00*

R 400,00*

Tip

New

BIMservice | Fault Diagnose Construction Technology

Task - Work Location: ZA - From George

Any dispute with building technology defects? We have solutions ready within 3 hours and estimate the expenses to fix it. How does building technology defect analysis work? We inspect, measure, perform endoscopy, strip down, and walk through the building to find the best way to locate the causes and develop sound technical action plans. We understand that not everything can be done in just a few hours, but a structured and precise damage analysis lays the foundation for a sustainable solution. What advantage does BIM Facility Management provide? With continuous use of our Facility Management or as part of BIMcare™ maintenance, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned or BIMcare™ and Facility Management are subsequently continued for at least 12 months without interruption. We always recommend an appropriate BIM model of your building. Always fully configure supply chains This is ideally only for a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™-customers automatically receive a discount on this item.

Content: 3 Hour/s (R 850,00* / 1 Hour/s)

R 2 550,00*

Tip

New

BIMservice | Fault Diagnose Potable Water Facilities

Task - Work Location: ZA - From George

Problems with your potable drinking water system? We care for solutions within 3 hours and estimate the repair costs to get it fixed. What is the advantage of maintenance contracts? If we maintain your system as part of BIMcare™, we will reimburse you 50% of the costs of this fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideal for a 4-day week of Montag bis Donnerstag. This is not an All-Inclusive Package, Travel Expenses and Labor Materials since they cannot be funded under BIMdepot™, BIMcare™, BIMpilot™ or BIMphase™. BIMcare™-Customers automatically get a price quote after the diesen Article.

Content: 3 Hour/s (R 850,00* / 1 Hour/s)

R 2 550,00*

Tip

New

BIMservice | Sanitary Engineer

Task - Work Location: ZA - From George

The sanitary engineer for your drinking water systems in buildings. For flawless food in your company or even at home in residential premises. Reliable drinking water supply with maximum hygiene and safety We ensure flawless drinking water quality with professional planning and precise installation. We optimize your systems through precise measurements, hydraulic balancing, and targeted solutions for water stagnation. Our customized flushing plans and settings support companies, operators, and landlords in ensuring the highest hygiene standards and occupational safety. Always fully configure supply chains This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

R 850,00*

Tip

New

BIMservice | Technical Advice

Task - Work Location: ZA - From George

Measurement, optimization or consulting? We offer this service on-site or remotely for one hour, tailored to your specific needs. What are the advantages of a BIMcare™ maintenance contract? After maintenance is performed under BIMcare™, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned and BIMcare™ is subsequently continued continuously for at least 12 months. Even without BIMcare™, a cost-effective remote service is available via WhatsApp. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

R 850,00*

Why Are These BIMdepot™ Items Listed?

BIMdepot™ items are internal tools for our technicians. You don’t need to select them — our BIM Facility Manager coordinates all required equipment. They’re listed for transparency and may be added at checkout to support on-site preparation.

BIMdepot | Operational Infrared Camera

BIMdepot Filter: Construction Technology

This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads. For various tasks, we also recommend the following equipment: If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

R 3 240,00*

BIMdepot | Operational Mobile Brazing Station

BIMdepot Filter: Air Handling Technology

This mobile soldering station is used by our technicians to create professional connections on refrigeration circuits, plumbing, and heating systems. It also includes consumables such as brazing solder, soldering gases, and flux. We also recommend the following equipment for various tasks: Nitrogen gas cylinder as soldering forming gas Nitrogen gas cylinder for pressure testing Vacuum pump for evacuating refrigeration systems, for example There's much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

R 2 980,00*

BIMdepot | Operational Nitrogen Pressure Reducer

BIMdepot Filter: Air Handling Technology

This pressure reducer is used by our technicians for commissioning, leak testing and soldering work on refrigeration systems. For various tasks, we also recommend the following equipment: Recycled bottle Refrigeration fitting Disposal station Nitrogen Nitrogen for pressure testing before filling refrigeration circuits Fresh refrigerant and much more... If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

R 300,00*

Tip

BIMpilot | Analysis Kit Surface Contact Samples

Language Version: English

Contact Sample Set for Professionals: Contains 5 round agar plates in Petri dishes for surface sampling – ideal for air filters, condensate trays, interior walls of air-conducting components, food processing areas, or refrigeration units. Sample evaluation and the creation of a test report (e.g., according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user. Note: Additional sets are required for more than 4 samples. Germ and Bacteria Analysis Most bacteria grow as red colonies on TTC agar – occasionally fungi and yeasts also grow. Colorless colonies are also included in the analysis. The decisive factor is the colony-forming units (CFU), not their size. If the bacterial count is high, the coating may appear uniformly colored or colorless if there is a high level of growth. Comparison with a fresh medium helps avoid misinterpretations. Guideline values: <104 CFU/ml = low contamination 104 – 106 CFU/ml = moderate >106 CFU/ml = high, unacceptable Important information Sampling kit – no on-site service included. Transport, consultation, action planning & Results discussion can be booked separately. Longer stays require a separate booking. Additional services are available via BIM Facility Management or Expert Report. Additional costs can be viewed at BIMpilot. Always professionally secure supply chains For full process support, we recommend booking a BIM Facility Manager or VDI Hygiene Inspector (Mon-Thurs, 4 days/week). Please note: Work equipment and travel expenses are not included – details can be found at BIMpilot or BIMservice.

R 2 200,00*