Specialized Technical Services for Electrical Systems & Control Cabinets

The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces. Hygiene assurance for building services systems and food processing surfaces Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials: Advantages: Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise. Sampling and risk assessment: Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators. Documentation and recurring inspections: The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling. Visual inspection and testing of external work environments: A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors. With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company. Are maintenance contracts necessary? We offer this without restrictive contracts in the BIMcare™ category. Always fully configure supply chains This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™

The Electric, Instrumentation, Controls Automation Technician is the solution for the well-regulated operation of building technologies. The economically effective. How our climate-neutral E&IC Technician works First, a comprehensive analysis of the potential causes of failure and the components involved would be required to identify possible vulnerabilities. Based on this, updates or upgrades to valves, pumps, and other relevant equipment could be considered to ensure more reliable performance. Integrating more advanced technology, perhaps incorporating IoT devices for remote monitoring and control, could also improve the effectiveness of the system. In this way, we minimize maintenance and repair times and increase operational efficiency. Additionally, we incorporate environmentally friendly practices to make operations more carbon neutral and realize long-term cost savings. Always fully configure supply chains This is ideally just for a 4-day week from Monday to Thursday. This is not an all-inclusive package, travel costs and work materials are not included and can be found under BIMdepot, BIMcare, BIMpilot or BIMphase.

The climate-neutral arrival and departure for customer service in South Africa, Western Cape. Customer-friendly and environmentally friendly for the country. Why arrival and departure is a business trip Every business trip is part of an environmentally friendly supply chain, so our technicians can be on-site quickly and sustainably: Select the distance for arrival and departure Select charging station Travel and charging times are included Loading times (at approx. 25 kWh/100 km) Spacing Directions Total AC3.7 kW/1P22 hours at0-100% AC7.4 kW/1P11 hours at 0-100% DC100 kW40 min. at0-100% Up to 50 km 100 km 7 h 3:30 h 0:40 h 51-100 km 200 km 14 h 7 h 0:50 h 101-150 km 300 km 20 h 10:30 h 1 h 151-200 km 400 km 26:40 h 14 h 1:30 h 201-250 km 500 km 33:30 h 18 h 2 h 251-300 km 600 km 40 h 21 h 2:30 h 301-500 km 1000 km 67 h 35 h4 h 501-600 km 1200 km 80 h 41:30 h 4:30 h 601-800 km 1600 km 107 h 55 h 5:30 h 801-1000 km 2000 km 133 h 69 h 8 h

Any disputes in the construction of your building? Within 3 hours we may deliver solutions and do estimate the repair costs. Dispute analysis for the construction technologies We inspect, measure, endoscope, dismantle, walk around, read contracts to find the best way to locate the causes and develop well-founded technical action plans. We are aware that not everything can be done within a few hours, but a structured and precise damage analysis lays the foundation for a sustainable solution. This you can initiate even before issues arise. Your advantage of our BIM Facility Management Just use us with experienced Facility Management continuously or as part of BIMcare™ maintenance, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned or BIMcare™ and facility management are subsequently continued for at least 12 months without interruption. We do always recommend an appropriate BIM-Model of your building to make all relevant transparent. Always configure supply chains completely It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive package, travel costs and work equipment are not included and these can be found under BIMpilot™, BIMdepot™ or BIMservice™.

Unknown fault in the control cabinet? We will create a diagnosis within 3 hours to solve the problem. The advantage of a maintenance contract After maintenance has been carried out as part of "BIM-Care", we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIM-Care is then continued for at least 12 months without interruption. Always configure supply chains completely It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive service, travel costs and work equipment are not included and these can be found under BIMpilot or BIMservice.