Productos para edificios modernos, sostenibilidad y conservación de valor

El adhesivo especial Kaiflex 414 es libre de tolueno y está optimizado para los aislantes elastoméricos de Kaimann. Se utiliza para unir aislantes de caucho de la serie Kaiflex hasta 105°C (excepciones: productos EPDM, Solar, HT de Kaimann). El adhesivo también se adhiere a superficies metálicas. Kaiflex 414 está basado en policloropreno, es libre de aromáticos y se vuelve inodoro tras 36 horas de curado.

Aluminium adhesive tape, specially designed for sealing joints and connections on insulated copper pipes. The standard fixing tape is easy to apply and provides long-lasting sealing and protection against moisture, dust, and corrosion. Ideal for installations in heating, air-conditioning, and refrigeration systems. Material: Aluminium Dimensions: 75 mm x 0.003 mm, 45 m per roll Weight: 0.7 kg per roll Unit: Pc. Perfect for long-lasting sealing of pipe joints and insulation

Original MS-1633 replacement hose for peristaltic kneading pumps of the ASPEN Condensate Pump PERI. Easy swap, reliable performance, durable spare part.

The new Peri Pro+ is a float-operated condensate pump offering exceptional reliability with an industry-leading 5-year warranty*. Based on stepper motor technology and software control, this version features intelligent pumping technology similar to the latest mini-pumps – always with the goal of minimizing noise and hose wear. The Peri Pro+ is ideally suited for split systems with high walls, ducted units, and floor-standing and chassis units. It's perfect for hotel rooms and other remote installation locations. *Hose not included and subject to proper installation and operation.

The new and improved 5th generation Silent+ Mini Lime is the quietest corner duct pump on the market at just 16 dB(A). Quick, easy, and flexible to install with proven technology, high flow performance, and low power consumption. Maximum performance, high reliability, and energy efficiency at near-silent operation. Ideal for comfort and commercial areas where low noise is critical. Features: Backward-compatible Plug & Play cable Compatible with all common duct systems Fast installation – no vibration damper or anti-siphon valve required Flow rate up to 40 l/h with up to 10x lower power consumption Suitable up to 46 kW / 157000 Btu/h Vibration damper for quiet operation Pump can be installed in duct angle, left or right Various duct systems available Easy maintenance Included: Silent+ Mini Lime pump with 1.5 m fixed power cable Construction with vibration damper and backflow protection 500 mm inlet hose (14 mm ID) 40 mm PVC vent hose (6 mm ID) Pump angle 800 mm straight duct (not for OEM) Seal and ceiling penetration Inlet adapter Mounting kit Installation manual

Our large capacity bag is specially designed for the disposal of used air filter materials from air conditioning systems. It offers enough space for three bag filters with the dimensions 592x592 and a maximum bag length of 600mm in the standard size of the big bag. Depending on requirements, additional products or services may be required, such as:LogisticsDisposal costsStaff deploymentMultiple big bags ...

El Big Foot Multi Frame XL Extension es una extensión robusta y versátil para sistemas de montaje en tejados planos. Diseñada para un montaje sencillo, soporta una amplia variedad de unidades mientras mantiene la plena funcionalidad del techo. Cada uno de los dos pies mide 330x330 mm y es ajustable individualmente en altura de 330 a 610 mm, lo que permite un alineamiento preciso incluso en superficies irregulares. Las grandes bases aseguran una distribución uniforme de la carga y protegen la superficie del techo. Con una carga máxima de 500 kg, la extensión es adecuada para aplicaciones exigentes. Se entrega en caja con kits de sujeción, construcción en acero galvanizado en caliente, alfombra de EPDM reciclable y pies de nylon relleno de vidrio reciclado. Probado a niebla salina durante 1000 horas. Características técnicas: Compatible con una amplia variedad de unidades Dimensiones de los pies: 330 x 330 mm Ajuste de altura: 330–610 mm Carga máxima: 500 kg Fácil de montar Se suministra en caja con kits de sujeción Acero galvanizado en caliente Alfombra de EPDM reciclable Pies de nylon reciclado reforzado con vidrio Probado a niebla salina durante 1000 horas Información de pedido: Producto: Big Foot Multi Frame XL Extension – 1500x1200 mm – 2x330 mm Pie Código de artículo: BFS-1228-000 Dimensiones externas: L1500 x A1200 mm Peso: 34 kg EAN: 5414618006753 SKU: 10425840000 OEM: BN9732 Unidad: Pieza Cantidad mínima de pedido: 1 pieza Marca: Big Foot Systems Grupo de producto: A El Big Foot Multi Frame XL Extension proporciona una solución duradera, flexible y de alta calidad para la extensión de sistemas de montaje en tejados planos.

El Big Foot Multi Frame XL es un sistema de montaje extremadamente robusto y flexible para cubiertas planas. Ha sido diseñado para una instalación rápida y sencilla, garantizando la máxima estabilidad y la plena funcionalidad del techo, incluso una vez instalado. Gracias a las tres barras transversales integradas y a su diseño extensible de forma continua por ambos lados, el sistema puede adaptarse óptimamente a diferentes requisitos. Cada apoyo es regulable en altura de forma individual y desmontable, lo que permite una alineación precisa incluso en superficies de techo irregulares. Las grandes bases garantizan una distribución uniforme de la carga y protegen la superficie del techo. Con una capacidad de carga máxima de 500 kg, el Multi Frame XL es ideal para aplicaciones exigentes. De forma opcional, están disponibles alfombrillas antivibración inclinadas y una versión de mayor altura. Características técnicas: Instalación sencilla Construcción extremadamente robusta 3 barras transversales Extensible de forma continua por ambos lados El techo permanece totalmente funcional Patas regulables en altura y desmontables individualmente Dimensiones de la base (L x A): 305 x 305 mm Ajuste de altura: 335–440 mm Carga máxima: 500 kg Varilla roscada: M24 Opcional: versión elevada (335–660 mm) Opcional: alfombrillas antivibración inclinadas Información de pedido: Producto: Big Foot Multi Frame XL (boxed) Dimensiones: 1500 x 1200 mm Patas: 4 x 305 mm Código de artículo: BFS-1515-000 Peso: 43 kg EAN: 5414618981616 SKU: 10371320000 OEM: B9731 Unidad: Pieza Pedido mínimo: 1 pieza Marca: Big Foot Systems Grupo de producto: A El Big Foot Multi Frame XL representa una solución de montaje duradera, resistente y flexible con el máximo nivel de calidad.

The BIMcare™ Consumables Package for Air Conditioning is an optional addition to BIMcare™ maintenance. It enables predictable costs, audit-proof documentation, and supports compliance with operator obligations for your air conditioning and ventilation systems. Objective Ensuring hygienic and cost-efficient operation of air conditioning systems through the use of standard consumables. Included Materials Filter materials (fine filters, activated carbon filters) Disinfectants and cleaning agents for split-type indoor and outdoor units Marking, sealing, and labeling materials for maintenance schedule Disposable gloves, cleaning cloths, and functional test materials Not Included Renovation or replacement of air conditioning units Extensive mold removal or special measures External lab costs or special testing equipment, e.g., for leak detection Delivery only in conjunction with BIMcare maintenance.

The BIMcare™ Consumables Package for a Combined Supply and Exhaust Air Unit is an optional addition to BIMcare™ maintenance. It provides predictable costs, audit-proof documentation, and supports compliance with operator obligations for your ventilation systems. Objective Ensure hygienic and cost-efficient operation of ventilation systems through the use of approved consumables according to VDI 6022. Included Materials Disposable face masks, gloves, protective clothing All-purpose cleaners, disinfectants for heat exchangers and surfaces Cleaning cloths (disposable and reusable), sponges, drying cloths, trash bags Brushes, lamella combs, vacuum bags according to VDI 6022 Marking, sealing, and labeling materials for maintenance points Not Included Special air filters or standard filters for multi-stage systems Drive belts Extensive mold removal or hygiene/special measures External lab costs or special sampling/testing materials, additional personnel Delivery only in conjunction with BIMcare maintenance.

The BIMcare™ Consumables Package for Drinking Water is an optional addition to the BIMcare maintenance service. It allows predictable costs, audit-proof documentation, and supports compliance with operator obligations. Objective Ensuring drinking water hygiene using material-friendly, drinking water-compliant consumables. Included Consumables Disinfectants and flushing agents (standard- and material-compliant) Chemicals for hygiene flushing (e.g., citrate or peroxide-based) Sampling consumables (sterile bottles, disposable tubes, adapters) Seals, O-rings, standard connectors (EPDM/silicone, drinking water compliant) Cleaning and care chemicals for fittings and surfaces Marking and labeling materials Not Included Renovations, pipe replacements, shock disinfections External lab costs and special sampling kits (e.g., item ZT80401.1) Hygiene flushing plans or inspection checklists Delivery only in combination with a BIMcare maintenance contract.

El BIMdepot kit de análisis de agua potable permite la toma de muestras profesional y el análisis en laboratorio del agua potable en un punto definido. Las muestras se recogen en envases certificados y se envían a un laboratorio acreditado para su análisis. Los resultados proporcionan una base fiable para evaluar la calidad del agua y posibles contaminaciones químicas o biológicas. La toma de muestras debe ser realizada por personal cualificado. 🔬 Alcance del análisis Según la variante seleccionada se analizan: Parámetros químicos: Plomo (Pb), Níquel (Ni), Cobre (Cu) Parámetros biológicos: Bacterias coliformes, Enterococos intestinales, Pseudomonas aeruginosa, Legionella 📦 Variantes Directo | Metales pesados y químicaAutomuestreo para análisis químico Directo | Bacterias y microbiologíaAutomuestreo para pruebas microbiológicas Directo | Análisis completoAutomuestreo para análisis químicos y biológicos combinados Acreditado y supervisado | Metales pesados y químicaMuestreo acreditado con apoyo de coordinación para metales pesados Acreditado y supervisado | Bacterias y microbiologíaMuestreo acreditado con apoyo de coordinación para higiene Acreditado y supervisado | Análisis completoMuestreo acreditado con apoyo de coordinación para un análisis completo del agua ⚠️ Información importante Válido para un punto de muestreo. Se requieren kits adicionales para más ubicaciones. El envío al laboratorio está incluido salvo indicación contraria. Los servicios in situ disponibles por separado. 📊 Resultados y Beneficios El análisis de laboratorio proporciona mediciones detalladas y una evaluación verificable de la calidad del agua. Sirve de base para que los profesionales inicien o mantengan medidas técnicas, optimicen la higiene o proporcionen documentación legal. Configuración completa de las cadenas de suministro Para una implementación completa, recomendamos contratar a un Gestor de Instalaciones BIM o un Inspector de Higiene VDI como profesional certificado, generalmente 4 días a la semana (de lunes a jueves). Nota: Esta oferta no es integral. Los gastos de viaje y el equipo no están incluidos y pueden reservarse opcionalmente en las categorías BIMconnect, BIMpilot o BIMservice.

Kit BIMdepot de muestreo por contacto e hisopos para análisis de superficies profesionales: Incluye 5 placas de agar redondas en placas Petri y 5 hisopos para muestreo de superficies – ideal para filtros de aire, bandejas de condensados, paredes interiores, componentes de aire, áreas alimentarias o equipos de refrigeración. El análisis de muestras y la elaboración de informes (por ejemplo, según VDI 6022, HACCP o GMP) no están incluidos y son responsabilidad del usuario. Los hisopos se recomiendan para superficies de difícil acceso o irregulares. Nota: Para más de 5 muestras se requieren kits adicionales. Análisis microbiano y bacteriano En agar TTC, la mayoría de las bacterias crecen como colonias rojas – también pueden aparecer hongos y levaduras. Las colonias incoloras también se incluyen en la evaluación. El factor decisivo son las Unidades Formadoras de Colonias (UFC), no el tamaño de la colonia. En alta carga microbiana, la superficie puede aparecer uniformemente coloreada o incolora debido al crecimiento intenso. La comparación con un medio fresco ayuda a evitar interpretaciones erróneas. Valores de referencia: < 10⁴ UFC/ml = baja contaminación 10⁴ – 10⁶ UFC/ml = contaminación moderada > 10⁶ UFC/ml = alta, contaminación no aceptable Notas importantes Este kit no incluye EPI, toma de muestras in situ ni servicios. El transporte, asesoramiento, planificación de medidas e interpretación se reservan por separado. Las estancias coordinadas o prolongadas requieren reserva independiente. Asegurar cadenas de suministro de forma profesional Para soporte completo de proceso y muestreo se recomienda la contratación de un BIM Facility Manager o inspector de higiene VDI (lun–jue, 4 días/semana). Nota: El equipo de trabajo y los gastos de viaje no están incluidos – ver BIMconnect, BIMpilot o BIMservice.

This bottle is used to capture, transport or dispose up to 9 Kg of refrigerant gases. With this, our technician works in an environmentally friendly way. Proper disposal of gases, hazardous goods transport surcharge and cleaning of the container are included. For various tasks we also recommend: Disposal Station Refrigeration Fitting Refrigerant scale Nitrogen for pressure tests before commissioning or filling refrigeration circuits There are refrigerators, vacuum pumps and much more for any task ... If the item is listed as a rental item in your sales channel, it usually needs to be shipped together with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

Ideal para uso diario, duradero y confiable. Perfecto para todas las áreas donde se deben recoger grandes cantidades de residuos. Bolsas de basura resistentes a desgarros, súper fuertes, hechas de regranulado de LDPE grueso Capacidad: 120 L Paquete: 10 uds Adecuado para residuos domésticos, oficina, mantenimiento, obras de construcción y servicios de edificios Consumibles para reciclaje y recogida de residuos separada Color: Negro

El cable NYM-J 3x2,5 mm² es adecuado para instalaciones fijas en edificios. Puede instalarse en paredes, yeso y hormigón en ambientes secos y húmedos. El aislamiento de PVC proporciona durabilidad. Apto para uso exterior si está protegido del sol. No apto para enterramiento. Aplicaciones típicas incluyen enchufes, iluminación e instalaciones eléctricas generales.

El cable NYM-J 3x4 mm² es ideal para instalaciones fijas en edificios. Puede instalarse en paredes, yeso y hormigón en ambientes secos y húmedos. El aislamiento de PVC proporciona durabilidad. Apto para uso exterior si está protegido del sol. No apto para enterramiento. Aplicaciones típicas incluyen instalaciones eléctricas de mayor potencia y distribución de energía.

The NYM-J installation cable 3x6 mm² is a high-performance cable for fixed installations in buildings. Suitable for installation above, on, in and under plaster in dry, damp and wet environments as well as in masonry and concrete. The durable PVC insulation and sheath ensure excellent mechanical strength and long service life. Suitable for outdoor use if protected from direct sunlight. Not suitable for underground installation. Typical applications include high load circuits, power distribution and connections for larger electrical equipment. Technical Features: Cable type: NYM-J Cores: 3 Cross section: 6 mm² Rated voltage: 300/500 V

El cable NYM-J 5x1,5 mm² es adecuado para instalaciones fijas en edificios. Puede utilizarse en interiores, paredes, yeso y hormigón en ambientes secos y húmedos. Características: Tipo: NYM-J Conductores: 5 Sección: 1,5 mm²

El cable NYM-J 5x2,5 mm² es ideal para instalaciones fijas en edificios. Puede instalarse en paredes, yeso y hormigón en ambientes secos y húmedos. El aislamiento de PVC proporciona durabilidad. Apto para uso exterior si está protegido del sol. No apto para enterramiento. Aplicaciones típicas incluyen enchufes, iluminación e instalaciones eléctricas generales.

El cable NYM-J 5x4 mm² es adecuado para instalaciones fijas en edificios. Puede instalarse en paredes, yeso y hormigón en ambientes secos y húmedos. El aislamiento de PVC proporciona durabilidad. Apto para uso exterior si está protegido del sol. No apto para enterramiento. Aplicaciones típicas incluyen sistemas trifásicos, distribución de energía y equipos de alta potencia.

El cable NYM-J 5x6 mm² es adecuado para instalaciones fijas en edificios. Puede instalarse en paredes, yeso y hormigón en ambientes secos y húmedos. El aislamiento de PVC proporciona durabilidad. Apto para uso exterior si está protegido del sol. No apto para enterramiento. Aplicaciones típicas incluyen sistemas trifásicos, distribución de energía y equipos de alta potencia.

Cable trunking, cable duct LFK 25 x 25 without retaining clips (per 2 m of trunking). Base perforation up to LFK 40 x 40 is single-row, from LFK 40 x 60 it is double-row. From LFK 60 x 60 with a continuous mounting rail for attaching divider rails. Completely overlapping top section (cover) and base perforation. Tunnel length: 2 mMaterial: PVC - Polyvinyl chlorideFlammability: Flame-retardant, self-extinguishing

El cable NYY-J 3x10 mm² es resistente y duradero, ideal para instalaciones fijas en entornos exigentes. Apto para interior, exterior, enterrado, hormigón y agua. Características técnicas: Tipo: NYY-J Conductores: 3 Sección: 10 mm²

El cable NYY-J 3x2,5 mm² es un cable resistente y duradero para instalaciones fijas en entornos exigentes. Apto para uso en interiores, exteriores, enterrado, en hormigón y agua. Dispone de aislamiento y cubierta de PVC de alta calidad, conforme a VDE 0276-603 y con tensión nominal de 0,6/1 kV. Características técnicas: Tipo: NYY-J Conductores: 3 Sección: 2,5 mm²

El cable NYY-J 3x4 mm² es resistente y duradero, ideal para instalaciones fijas en entornos exigentes. Apto para interior, exterior, enterrado, hormigón y agua. Características técnicas: Tipo: NYY-J Conductores: 3 Sección: 4 mm²

El cable NYY-J 3x6 mm² es resistente y duradero, ideal para instalaciones fijas en entornos exigentes. Apto para interior, exterior, enterrado, hormigón y agua. Características técnicas: Tipo: NYY-J Conductores: 3 Sección: 6 mm²

El cable NYY-J 5x1,5 mm² es un cable resistente diseñado para instalación fija en entornos exigentes. Apto para uso en interiores, exteriores, enterrado, en hormigón y agua. Cuenta con aislamiento y cubierta de PVC duraderos, cumpliendo con VDE 0276-603 y tensión nominal de 0,6/1 kV. Características técnicas: Tipo: NYY-J Conductores: 5 Sección: 1,5 mm² Tensión: 0,6/1 kV

El cable NYY-J 5x2,5 mm² es un cable resistente y duradero para instalaciones fijas en entornos exigentes. Apto para uso en interiores, exteriores, enterrado, en hormigón y agua. Dispone de aislamiento y cubierta de PVC de alta calidad, conforme a VDE 0276-603 y con tensión nominal de 0,6/1 kV. Características técnicas: Tipo: NYY-J Conductores: 5 Sección: 2,5 mm²

El cable NYY-J 5x4 mm² es resistente y duradero, ideal para instalaciones fijas en entornos exigentes. Apto para interior, exterior, enterrado, hormigón y agua. Características técnicas: Tipo: NYY-J Conductores: 5 Sección: 4 mm²

El cable NYY-J 5x6 mm² es resistente y duradero, ideal para instalaciones fijas en entornos exigentes. Apto para interior, exterior, enterrado, hormigón y agua. Características técnicas: Tipo: NYY-J Conductores: 5 Sección: 6 mm²

Canaleta para cables de 110 x 60 mm sin clips de sujeción (por cada 2 m de canaleta). Sección superior superpuesta (tapa). Longitud del conducto: 2 m Material: PVC - Cloruro de polivinilo Inflamabilidad: Retardante de llama, autoextinguible La imagen del producto no es vinculante y puede variar respecto al artículo entregado.

Canal de cables LFK 40 x 40 sin clips de sujeción (por cada 2 m de canal). Perforación de base hasta LFK 40 x 40 en una fila, a partir de LFK 40 x 60 en doble fila. Desde LFK 60 x 60 con riel de montaje continuo para separadores. Tapa completamente superpuesta y base perforada. Longitud del canal: 2 mMaterial: PVC - Policloruro de viniloInflamabilidad: Difícilmente inflamable, autoextinguible

Canaleta para cables LFK 40 x 60, incluye 4 clips de sujeción (por cada 2 m de canaleta). La perforación de la base es de una fila hasta LFK 40 x 40, y de doble fila a partir de LFK 40 x 60. A partir de LFK 60 x 60, incorpora un riel de montaje continuo para la fijación de rieles divisores. La sección superior (tapa) y la perforación de la base se superponen completamente. Longitud del túnel: 2 mMaterial: PVC - Cloruro de poliviniloInflamabilidad: Retardante de llama, autoextinguible La imagen puede diferir del aspecto del artículo entregado y no es vinculante

CondenCide® is an alkaline, concentrated evaporator cleaner and disinfectant designed for refrigeration and air conditioning systems. It provides thorough cleaning and disinfection of heat exchangers and condensate trays, ensuring optimal system hygiene and performance. The concentrated formulation offers excellent value for money and is ideal for professional and commercial applications. Key Features QX-60® technology: Kills 99.999% of bacteria within 60 seconds Effectively removes dirt, sludge and mould Improves indoor air quality and overall system efficiency Contents: 5 litre concentrate

This installation set includes a coordinated material package for the creation of electrical supply lines and protection. Suitable for air conditioning systems, split units, control cabinets or other technical systems with a single-phase 230-volt power supply. The installation SET has been configured for TT systems. A service socket for outdoor maintenance work is included in the set. The set provides all essential installation components typically required for a standards-compliant electrical supply line and device protection. The installation itself is not part of this offer. Installation set variants Variant 1 – Basic installation Material package for a standard installation of electrical supply lines including the necessary protection and maintenance switch. Required space in the existing distribution board: 5 module units for single-phase circuits (230 V) 10 module units in mixed three-phase distribution boards (400 V) Main terminal block with free outgoing capacity for L, N, PE Material package contains up to 16A: DE-HS1003 - Installation cable NYY 3x2.5qmm / electrical supply line DE-UN1000 - H07VK flexible conductor cable black 4 qmm DE-UN1100 - H07VK flexible conductor cable blue 4 qmm DE-UN1200 - H07VK flexible conductor cable green-yellow 4 qmm Various small materials for distribution without terminal block DE-HAGMCB03KA1P16A - miniature circuit breaker 16A (MCB) Material package contains for 20 to 25A: DE-HS1004 - Installation cable NYY 3x4qmm / electrical supply line DE-UN1001 - H07VK flexible conductor cable black 6 qmm DE-UN1101 - H07VK flexible conductor cable blue 6 qmm DE-UN1201 - H07VK flexible conductor cable green-yellow 6 qmm Various small materials for distribution without terminal block DE-HAGMCB06KA1P025A - miniature circuit breaker 25A (MCB) Material package contains for 32A: DE-HS1005 - Installation cable NYY 3x6qmm / electrical supply line DE-UN1002 - H07VK flexible conductor cable black 10 qmm DE-UN1102 - H07VK flexible conductor cable blue 10 qmm DE-UN1202 - H07VK flexible conductor cable green-yellow 10 qmm Various small materials for distribution without terminal block DE-HAGMCB06KA1P032A - miniature circuit breaker 32A (MCB) Material package contains for 40A: DE-HS1006 - Installation cable NYY 3x10qmm / electrical supply line DE-UN1003 - H07VK flexible conductor cable black 16 qmm DE-UN1103 - H07VK flexible conductor cable blue 16 qmm DE-UN1203 - H07VK flexible conductor cable green-yellow 16 qmm Various small materials for distribution without terminal block 0000 - miniature circuit breaker 40A (MCB) Material package contains for 50A: DE-HS1007 - Installation cable NYY 3x16qmm / electrical supply line 0000 - H07VK flexible conductor cable black 25 qmm 0000 - H07VK flexible conductor cable blue 25 qmm 0000 - H07VK flexible conductor cable green-yellow 25 qmm Various small materials for distribution without terminal block 0000 - miniature circuit breaker 50A (MCB) Material package contains for 63A: 0000 - Installation cable NYY 3x25qmm / electrical supply line 0000 - H07VK flexible conductor cable black 35 qmm 0000 - H07VK flexible conductor cable green-yellow 35 qmm 0000 - H07VK flexible conductor cable blue 35 qmm Various small materials for distribution without terminal block 0000 - miniature circuit breaker 63A (MCB) Material package included in all variants: DE-HAGMCB03KA1P16A - miniature circuit breaker 16A (MCB) DE-HAGCD264J - residual current device (RCD) DE-HAGKB263A - Bus Bar 1 pole DK-KG32T20340KL51V - maintenance and repair switch for outdoor units DE-MERT23018029 maintenance / service socket outdoor DK-HAGVZ025M - cable glands DE-WU097364040 - cable protection / cable routing channel with mounting material DE-WU05021413.2 - cable ties fastening material Variant 2 – Installation with 2-pole surge protection Extended material package with additional protection against grid disturbances and voltage spikes. Required space in the existing distribution board: 7 module units for single-phase circuits (230 V) in three-phase distribution boards 12 module units in mixed three-phase distribution boards (400 V) Main terminal block with free outgoing capacity for L, N, PE Material package additionally contains: DE-DEHSPD014-900454 - surge protection (SPD) for network and device protection 2-pole Installation components for integration of surge protection Variant 3 – Installation with 4-pole surge protection Extended material package with additional protection against grid disturbances and voltage spikes. Typical space requirement in the existing distribution board: 12 module units for single-phase circuits (230 V) in three-phase distribution boards 12 module units in mixed three-phase distribution boards (400 V) Main terminal block with free outgoing capacity for L1, L2, L3, N, PE Material package additionally contains: DE-DEHSPD016-952310 - surge protection (SPD) for network and device protection 4-pole Installation components for integration of surge protection Notes on space requirements and installation Before installing this installation set, it must be checked whether the existing distribution cabinet has sufficient space and capacity reserves for the required protection components. The specified module units (TE) serve as a guideline for estimating the required installation space. The installation set is designed for use in TN and TT systems; system-specific connection and installation requirements must be observed. If the available space or capacity reserve is insufficient, installation of a separate small distribution board or sub-distribution board may be required. This material is not included in this installation set. Installation of the included components may only be carried out by qualified electrical professionals in accordance with the applicable electrical safety requirements (5-rule safety principle). The scope of delivery does not include technical fire protection. If required, it must be planned, ordered and installed separately. Typical applications Control cabinets Split air conditioning systems Small heat pumps Ventilation units Technical systems with 230-volt supply NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Este conjunto de montaje incluye una composición coordinada de materiales para la instalación de líneas de alimentación eléctrica y protecciones. Adecuado para sistemas de aire acondicionado, unidades split, armarios eléctricos u otras instalaciones técnicas con alimentación 3-fásica de 400 voltios. El set incluye una toma de servicio para trabajos de mantenimiento en exteriores. El set proporciona todos los componentes de instalación esenciales que normalmente se requieren para una línea eléctrica y protección de equipos conforme a la normativa. La instalación en sí no forma parte de esta oferta. Variantes del set de montaje Variante 1 – Instalación básica Composición de materiales para una instalación estándar de líneas eléctricas incluyendo la protección necesaria y un interruptor de mantenimiento. Espacio típico necesario en el cuadro de distribución existente: 2 TE para salidas monofásicas (230 V) 5 TE para salidas trifásicas (400 V) en cuadros mixtos El paquete de materiales contiene: [ART-XXXX] Cable de instalación / línea de alimentación eléctrica [ART-XXXX] Interruptor automático (LS) [ART-XXXX] Interruptor diferencial (FI/RCD) [ART-XXXX] Interruptor de mantenimiento / servicio para unidades exteriores [ART-XXXX] Toma de servicio / mantenimiento exterior [ART-XXXX] Prensaestopas [ART-XXXX] Protección de cables / material de instalación

Installation set for small and large split air conditioning systems, primarily for commercial use, consisting of the following components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick connectors DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x white acrylic sealant – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 12x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 10 m control cable 5 x 1.5 mm DE-WU097366090 – 10 m cable duct 60 x 90 mm, white DE-HS760002001 – 10 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 30x TX screws 4.5x60 mm DE-WU590620635 – 32x wall plugs 6 mm DE-WU0176203535 – 2x TX screws 3x35 mm DE-S321.4016 – 10 m CU double pipe 10, 16 mm insulated DE-S282.0541 – 2x solder fittings 10 mm DE-S282.0543 – 2x solder fittings 16 mm 1x nitrogen soldering gas (flat rate) content, sealant Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 – 2x wall brackets 630 mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x support beams 45° DE-WU0862005326 – 2x holding clamp M10 DE-WU005791040 – 2x hex screws M10 DE-WU037110 – 2x hex lock nuts M10 DE-WU041610 – 4x body washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof installation: DE-LIN1229000 - 1x SET roof support beams 1000 mm DE-WU071392915 – 2x construction site protective mats (strips) NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 10 m control cable 5 x 1.5 mm DE-WU097366090 – 10 m cable duct 60 x 90 mm, white DE-HS760002001 – 10 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 10m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips

Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick couplings DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 12x cable ties KBL 1 polyamide with plastic tongue DE-HS1001 – 15 m control cable 5 x 1.5 mm² DE-WU097366090 – 15 m cable trunking 60 x 90 mm, white DE-HS760002001 – 15 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 40x TX screws 4.5x60mm DE-WU590620635 – 42x wall plugs 6mm DE-WU0176203535 – 2x TX screws 3x35mm DE-S321.4016 – 15 m CU double pipe 10,16mm insulated DE-S282.0541 – 2x solder fittings 10mm DE-S282.0543 – 2x solder fittings 16mm 1x nitrogen soldering gas (flat rate), sealant included Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 – 2x wall brackets 630mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x support bars 45° DE-WU0862005326 – 2x retaining clips M10 DE-WU005791040 – 2x hex screws M10 DE-WU037110 – 2x hex lock nuts M10 DE-WU041610 – 4x fender washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof mounting: DE-LIN1229000 - 1x SET roof support beams 1000mm DE-WU071392915 – 2x construction protection mats (strips) NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 15 m control cable 5 x 1.5 mm DE-WU097366090 – 15 m cable duct 60 x 90 mm, white DE-HS760002001 – 15 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 15m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick couplings DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 20x cable ties KBL 1 polyamide with plastic tongue DE-HS1001 – 20 m control cable 5 x 1.5 mm² DE-WU097366090 – 20 m cable trunking 60 x 90 mm, white DE-HS760002001 – 20 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 50x TX screws 4.5x60mm DE-WU590620635 – 52x wall plugs 6mm DE-WU0176203535 – 2x TX screws 3x35mm DE-S321.4016 – 20 m CU double pipe 10,16mm insulated DE-S282.0541 – 2x solder fittings 10mm DE-S282.0543 – 2x solder fittings 16mm 1x nitrogen soldering gas (flat rate), sealant included Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 – 2x wall brackets 630mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x support bars 45° DE-WU0862005326 – 2x retaining clips M10 DE-WU005791040 – 2x hex screws M10 DE-WU037110 – 2x hex lock nuts M10 DE-WU041610 – 4x fender washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof mounting: DE-LIN1229000 - 1x SET roof support beams 1000mm DE-WU071392915 – 2x construction protection mats (strips) NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 20 m control cable 5 x 1.5 mm DE-WU097366090 – 20 m cable duct 60 x 90 mm, white DE-HS760002001 – 20 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 20m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation kit for small and large split air conditioning systems, primarily for commercial applications, consisting of the following individual components in the corresponding quantities and for a maximum rated air conditioning output of approximately 12 kW. Installation set – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy-Mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 3 m control cable 5 x 1.5 mm DE-WU097366090 – 3 m cable duct 60 x 90 mm, white DE-HS760002001 – 3 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 20x TX screws 4.5x60mm DE-WU590620635 - 20x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4016 - 3m CU double pipe 10, 16mm insulated DE-S282.0541 - 2x solder sockets 10 mm DE-S282.0543 – 2x solder sockets 16 mm 1x nitrogen flat rate, soldering gas, sealant Mounting kit variant 1 – For facades with a cooling capacity over 3.5 kW: DE-WU0862009062 – 2x wall brackets 630 mm DE-WU0862005006 – 2x end caps DE-WU0862009125 – 2x bracket 45° DE-WU0862005326 – 2x retaining clips clamp DE-WU005791040 – 2x hexagon screw M10 DE-WU037110 – 2x hexagon nut M10 DE-WU590681266 – 6x Universal wall anchor 12 mm DE-WU019210100 – 6x Hex bolts M10x100 DE-WU041610 – 6x Washers M10 Mounting kit variant 2 – For floor or flat roof mounting: DE-LIN1229000 - 1x SET roof support beam 1000 mm DE-WU071392915 – 2x Construction site protection mats in strips NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 3 m control cable 5 x 1.5 mm DE-WU097366090 – 3 m cable duct 60 x 90 mm, white DE-HS760002001 – 3 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 20x TX screws 4.5x60mm DE-WU590620635 - 20x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 3m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation set for small and large split air conditioning systems, primarily for residential use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW. Installation Set – Basic Equipment: DE-WU0862104001 – 4x M8 quick connectors DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® mounting foam DE-WU0892165 – 1x white acrylic sealant – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 5 m control cable 5 x 1.5 mm DE-WU097366090 – 5 m cable duct 60 x 90 mm, white DE-HS760002001 – 5 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U elbow 20 mm 90° DE-HS240016001 – 1x Tangit adhesive DE-WU0176204560 – 30x TX screws 4.5x60 mm DE-WU590620635 – 32x wall plugs 6 mm DE-WU0176203535 – 2x TX screws 3x35 mm DE-S321.4046 – 5 m CU double pipe 6, 12 mm insulated DE-S282.0540 – 2x solder sleeves 6 mm DE-S282.0542 – 2x solder sleeves 12 mm 1x nitrogen soldering gas (flat rate) content, sealant Installation Set Variant 1 – For facades from 3.5 kW cooling capacity: DE-WU0862009062 - 2x wall bracket 630 mm DE-WU0862005006 – 2x end caps DE-WU0862009125 - 2x support beams 45° DE-WU0862005326 - 2x holding clamp M10 DE-WU005791040 - 2x hex screw M10 DE-WU037110 - 2x hex lock nut M10 DE-WU041610 - 6x body washers M10 DE-WU590681266 – 6x universal wall plugs 12 mm DE-WU019210100 – 6x hex screws M10x100 DE-WU041610 – 6x washers M10 Installation Set Variant 2 – For floor or flat roof installation: DE-LIN1229000 - 1x SET roof support beams 1000 mm DE-WU071392915 – 2x construction site protective mats (strips) NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW. Installation kit – basic equipment: DE-WU0862104001 – 4x M8 quick-release fasteners DE-WU04223830 – 4x M8 rubber washers DE-WU04168 – 4x M8 housing washers DE-WU0057850 – 4x M8x40 machine screws DE-WU0892143 – 1x PURLOGIC® Easy mounting foam DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue DE-HS1001 – 5 m control cable 5 x 1.5 mm DE-WU097366090 – 5 m cable duct 60 x 90 mm, white DE-HS760002001 – 5 m PVC-U pipe 20 mm DE-HS760010001 – 1x PVC-U angle 20 mm, 90° DE-HS240016001 – 1x Tangit glue DE-WU0176204560 – 30x TX screws 4.5x60mm DE-WU590620635 - 32x dowels 6mm DE-WU0176203535 - 2x TX screws 3x35mm DE-S321.4046 - 5m CU double pipe 6, 12mm insulated DE-S282.0540 - 2x soldering sockets 6mm DE-S282.0542 - 2x soldering sockets 12mm 1x Flat-rate nitrogen content, soldering gas content, sealant Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity: DE-WU0862009061 - 2x wall brackets 455mm DE-WU0862005006 - 2x end caps DE-WU590681266 - 4x universal wall anchors 12 mm DE-WU019210100 - 4x hexagon head screws M10x100 DE-WU041610 - 4x washers M10 Mounting Kit Variant 2 - For floor or flat roof mounting: DE-WU0862003056 - 2x Roof Support Beams 600mm DE-WU071392915 - 2x Construction Site Protection Mats in Strips NOTE: The product image is not binding and does not represent a claim to the contents of the set. This item is manufactured according to your specifications. Therefore, you have no right of withdrawal and no Coolenvi return policy applies.

Installation set for anchoring of usual two-point consoles with supporting trusses, primarily for installing appliances in commercial use on insulated facades with External Thermal Insulation Composite System. This SET is consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approximately 12 kW and thickness of insulation of upt o 200mm max. Installation Set – For ETICS thickness from 100 - 200 mm: DE-WU0892165 – 1x acrylic sealant white – 310 ml DE-WU0903450205 – 3x Allround Injection Mortar WIT-VM 250 – 420 ml DE-WU090344121 - 6x 12x50mm Sieve sleeve anchor - Perforated brickwork, aerated concrete DE-WU0905461016 - 6x M10x260mm Anchor rod for injection system DE-WU041610 – 12x M10x30mm fender washer DE-WU031710 – 12x hex nuts M10 DE-WU0911100200 - 6x Distance Spacer Installation AMO MAX

The Coolenvi™ CLASSIC console unit stands out as a powerful Bi-Flow console for year-round comfort in rooms of approx. 20–25 m². With excellent energy efficiency (A++ for cooling and heating) and an innovative floor-heating effect, the system ensures an even, comfortable room temperature – efficient, quiet and reliable, even without WiFi. Bi-Flow air distribution: Variable dual air outlet at the top and bottom for optimal air distribution during cooling and heating High efficiency: A++ energy class with inverter technology for low power consumption and consistent performance Healthy indoor air: Large-area dust filter combined with an IAQ filter for air purification and particle reduction Flexible design: Compact form factor for discreet installation under window sills or on the wall Convenient control: Infrared remote control included, WiFi optionally retrofittable Robust, durable and thoughtfully equipped: the Coolenvi console unit combines cooling, heating, dehumidification and air purification in one system. Optional features such as night comfort mode, weekly timer, frost protection (8 °C function), child lock, auto-diagnosis and preparation for optional leak detection make it a future-proof solution for demanding single rooms.

The Coolenvi™ CLASSIC console unit stands out as a powerful Bi-Flow console for year-round comfort in rooms of approx. 25–40 m². With excellent energy efficiency (A++ for cooling and heating) and an innovative floor-heating effect, the system ensures an even, comfortable room temperature – efficient, quiet and reliable, even without WiFi. Bi-Flow air distribution: Variable dual air outlet at the top and bottom for optimal air distribution during cooling and heating High efficiency: A++ energy class with inverter technology for low power consumption and consistent performance Healthy indoor air: Large-area dust filter combined with an IAQ filter for air purification and particle reduction Flexible design: Compact form factor for discreet installation under window sills or on the wall Convenient control: Infrared remote control included, WiFi optionally retrofittable Robust, durable and thoughtfully equipped: the Coolenvi console unit combines cooling, heating, dehumidification and air purification in one system. Optional features such as night comfort mode, weekly timer, frost protection (8 °C function), child lock, auto-diagnosis and preparation for optional leak detection make it a future-proof solution for demanding single rooms.