NOVAER Mounting Bracket Set for Oil Containment Tray

WÜRTH - VARIFIX® Retaining Clip, Galvanized, 41-D10.5mm

Item - Quantity: 1 Pc

Suitable for mounting rails: 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 44 mm, instead of washers for a stable connection of, among other things, support structures. Length: 55 mmThickness: 6 mmLeg Length: 47 mmSlotted Hole Length: 40 mmSlotted Hole Width: 15 mmWeight: 390 gSurface: GalvanizedMaterial: Structural steel, 1.0037Sustainability: Resources, pollutants / emissions

Content: 100 Pcs / (PU 100 Pcs) (R 0,09* / 1 Pcs / (PU 100 Pcs))

R 9,40*

WÜRTH - VARIFIX® end cap for mounting rail 26/18–41/124 black

Item - Quantity: PU

End cap for VARIFIX® mounting rails, designed for a clean and safe closure of open rail ends. Protects against dirt ingress and reduces risk of injury. Product features Suitable for mounting rails 26/18 to 41/124 Compatible with VARIFIX® profile systems Ensures safe and clean rail termination Quick and easy installation Note For double profiles, 2 end caps are required per end. Technical data MaterialPE (polyethylene) ColorBlack

Variants from R 12,22*

R 439,17*

WÜRTH - VARIFIX® Quick Fastener Systemfix 41 - M8

Item - Quantity: PU

VARIFIX® Quick Fastener Systemfix 41 for mounting all Varifix mounting rails in the 41 series. Secures instantly with a 1/4 turn. Force-fit connection to the rail. Precise fit in the mounting rail – alignment within the rail is possible. One-handed installation is possible. Facilitates installation, especially when working on a ladder. Compatible with all Systemfix 41 models. Suspensions with threaded rods for long lengths are possible. Content: 25 Pcs. Our products with the Cradle to Cradle Certified® certificate are resource-efficient and low in pollutants. The standard assesses the safety, recyclability, and pollutant content of materials in the final product. The focus here is on resource conservation, for example, through the use of recycled materials in the manufacturing process. Cradle to Cradle® certified. Enhance your building with pollutant-tested materials. Expanded scope of application for GreenBuilding and building certifications according to LEED®, BREEAM® and DGNB

Content: 25 Pcs / (PU 25 Pcs) (R 27,67* / 1 Pcs / (PU 25 Pcs))

Variants from R 29,14*

R 691,84*

WÜRTH - Anti-slip mat, granules, 250 x 5000 mm

Item - Quantity: Roll

Suitable for heavy and normal loads Suitable for: Heavy and normal loads.Min. coefficient of friction: 0.6 µMaterial thickness: 8 mmTemperature range: -40 to 115 °CMaterial: Rubber granules bonded with PURColor: BlackWidth: 250 mmLength: 5000 mmWeight per m²: 6.88 kgDensity: 860 kg/m³Min. elongation at break: 60%Building material class / condition: E - Normally flammable / according to DIN EN 13501-1 Type name: REGUPOL cargo mat 7210

Content: 5 m / (5m Roll) (R 145,36* / 1 m / (5m Roll))

Variants from R 103,40*

R 726,81*

WÜRTH - VARIFIX® Console 41/41 450 mm length Galvanized Steel

Universally applicable wall bracket for mounting pipes, assemblies, and much more.Base plate height: 126 mmBase plate width: 50 mmBase plate thickness: 8 mmProfile height: 41 mmProfile width: 41 mmProfile thickness: 2.5 mmSlotted hole length: 20 mmSlotted hole width: 13 mmHole spacing: 75 mmSlotted hole length 2: 20 mmSlotted hole width 2: 12.5 mmHole spacing 2: 35 mmSurface: GalvanizedMaterial: Structural steel, 1.0037Sustainability: Resources, pollutants / Emissions

R 334,64*

WÜRTH - VARIFIX® Console 41/41 630 mm length Galvanized Steel

Universal wall bracket for secure fastening of pipe systems, equipment and structural components. Designed for versatile use in installation and construction applications. Product features Robust design made of galvanized steel Suitable for pipes, installations and technical equipment Compatible with VARIFIX® 41/41 profile system Flexible installation due to slotted holes Technical data Length630 mm Profile size41 x 41 mm MaterialStructural steel 1.0037 SurfaceGalvanized Base plate (H x W x T)126 x 50 x 8 mm Profile thickness2.5 mm Slot hole 120 x 13 mm Hole spacing 175 mm Slot hole 220 x 12.5 mm Hole spacing 235 mm

R 385,40*

%

WÜRTH - Damping base Console for roofs 600 mm

Item - Quantity: 1 Pc

Efficient vibration damping reduces vibrations and noise during the installation of technical equipment. Durable material consisting of robust and weather-resistant SBR rubber for maximum service life. Easy installation enables quick and secure mounting with versatile application possibilities. High load-bearing capacity and stability ensure reliable performance under various requirements. Low-maintenance properties offer resistance to weathering, UV radiation, and many chemicals. Ideal for safe and long-lasting use in building technology and air conditioning installation. Note The damping bases with article numbers 0862003052, 0862003053, 0862003054, 0862003055, 0862003056, 0862003057 are not compatible with the risers 0862003138 and 0862003139. Our damping bases are specifically designed for professional use in building technology and air conditioning systems. They minimize noise and vibration transmission, contributing to quieter and more efficient system operation. Thanks to their robust material quality, they are ideal for long-term use under demanding conditions.

R 413,98* 👍 R 489,18* 💰 (15.37% saved)

WÜRTH Damping base Console for roofs 1000 mm

Item - Quantity: 1 Pc

Efficient vibration damping reduces vibrations and noise during the installation of technical equipment. Durable material consisting of robust and weather-resistant SBR rubber for maximum service life. Easy installation enables quick and secure mounting with versatile application possibilities. High load-bearing capacity and stability ensure reliable performance under various requirements. Low-maintenance properties offer resistance to weathering, UV radiation, and many chemicals. Ideal for safe and long-lasting use in building technology and air conditioning installation. Note The damping bases with article numbers 0862003052, 0862003053, 0862003054, 0862003055, 0862003056, 0862003057 are not compatible with the risers 0862003138 and 0862003139. Our damping bases are specifically designed for professional use in building technology and air conditioning systems. They minimize noise and vibration transmission, contributing to quieter and more efficient system operation. Thanks to their robust material quality, they are ideal for long-term use under demanding conditions.

R 808,59*

WÜRTH - VARIFIX® support bracket 45° galvanized

Item - Quantity: PU

Support bracket designed to reinforce wall brackets and mounting rail systems. Can be installed above, below or alongside consoles to increase load capacity and stability. Product features Increases load capacity of rail systems and brackets Compatible with VARIFIX® mounting rails Robust galvanized steel construction Flexible installation via slotted holes Cradle to Cradle® certified Technical data Angle45° Length418 mm Width50 mm Height295 mm Material thickness3 mm MaterialSteel 1.0332 SurfaceGalvanized Slot hole50 x 13 mm Hole diameter13 mm Permissible load4.5 kN Weight955 g

Variants from R 365,10*

R 1 460,76*

WÜRTH - VARIFIX® heavy-duty bracket set

VARIFIX® heavy-duty bracket set for wall mounting of HVAC units, ventilators and pumps. Equipped with rubber-metal buffers, pre-assembled hammerhead bolts, and adjustable fixing with sliding nuts. Bracket length: 640 mm Vertical support length: 520 mm Surface: Galvanized Material: Steel/Rubber Load capacity per pair: 160 kg Product weight per piece: 6090 g Integrated rubber-metal buffer Easy height adjustment Pre-assembled hammerhead bolts Flexible fixing via sliding nuts Quick wall mounting with cut-to-length rail 41/41/1.8 including end caps Sustainability: Resources, emissions, low hazardous substances

R 1 497,42*

Flat roof Inlet Attachment 125x125mm

Item - Quantity: 1 Pc

This roof inlet is designed for the safe and reliable routing of cables and wires on flat roofs. Its corrosion-resistant construction ensures long-term durability without rust or leakage. The wide base surface allows for a secure and watertight connection to the roof membrane. Manufactured from lightweight 2 mm aluminium plate, the unit combines structural stability with ease of installation. The interior is smoothly rounded beneath the protective hood to protect cables and insulation coatings from mechanical damage. With a generous passage opening of 125 × 125 mm and a height of 600 mm, the roof inlet provides ample space for organised and protected cable routing. For enhanced thermal insulation and condensation protection, optional insulation using Armaflex® insulation materials and technical foam is available. This optional insulation improves energy efficiency and provides additional protection for sensitive cables and conduits, particularly in demanding climatic conditions. Technical Specifications Application: Cable and wire routing on flat roofs Material: Aluminium, 2 mm thickness Corrosion resistance: Rust-free Passage opening: 200 × 200 mm Height: 600 mm Base dimensions: 425 × 425 mm Optional: Mandatory Armaflex® and/or PU-Foam Insulation after installation.

R 2 293,60*

Flat roof Inlet Attachment 200x200mm

Item - Quantity: 1 Pc

This roof inlet is designed for the safe and reliable routing of cables and wires on flat roofs. Its corrosion-resistant construction ensures long-term durability without rust or leakage. The wide base surface allows for a secure and watertight connection to the roof membrane. Manufactured from lightweight 2 mm aluminium plate, the unit combines structural stability with ease of installation. The interior is smoothly rounded beneath the protective hood to protect cables and insulation coatings from mechanical damage. With a generous passage opening of 200 × 200 mm and a height of 600 mm, the roof inlet provides ample space for organised and protected cable routing. For enhanced thermal insulation and condensation protection, optional insulation using Armaflex® insulation materials and technical foam is available. This optional insulation improves energy efficiency and provides additional protection for sensitive cables and conduits, particularly in demanding climatic conditions. Technical Specifications Application: Cable and wire routing on flat roofs Material: Aluminium, 2 mm thickness Corrosion resistance: Rust-free Passage opening: 200 × 200 mm Height: 600 mm Base dimensions: 500 × 500 mm Optional: Mandatory Armaflex® and/or PU-Foam Insulation after installation.

R 3 722,40*

Flat roof Inlet Attachment 500x200mm

Item - Quantity: 1 Pc

This roof inlet is designed for the safe and reliable routing of cables and wires on flat roofs. Its corrosion-resistant construction ensures long-term durability without rust or leakage. The wide base surface allows for a secure and watertight connection to the roof membrane. Manufactured from lightweight 2 mm aluminium plate, the unit combines structural stability with ease of installation. The interior is smoothly rounded beneath the protective hood to protect cables and insulation coatings from mechanical damage. With a generous passage opening of 500 × 200 mm and a height of 600 mm, the roof inlet provides ample space for organised and protected cable routing. For enhanced thermal insulation and condensation protection, optional insulation using Armaflex® insulation materials and technical foam is available. This optional insulation improves energy efficiency and provides additional protection for sensitive cables and conduits, particularly in demanding climatic conditions. Technical Specifications Application: Cable and wire routing on flat roofs Material: Aluminium, 2 mm thickness Corrosion resistance: Rust-free Passage opening: 500 × 200 mm Height: 600 mm Base dimensions: 680 × 425 mm Optional: Mandatory Armaflex® and/or PU-Foam Insulation after installation.

R 4 681,20*

NOVAER - Mounting Bracket Set for Oil Containment Tray

Product information "NOVAER - Mounting Bracket Set for Oil Containment Tray"

System Components – Compatible Accessories

NOVAER - Mounting Bracket Set for Oil Containment Tray

Product information "NOVAER - Mounting Bracket Set for Oil Containment Tray"

Login

System Components – Compatible Accessories