BIMservice | Fault Diagnose Construction Technology

The Hygiene inspector for sampling and the hygiene assurance for building services systems and food processing surfaces. Hygiene assurance for building services systems and food processing surfaces Our hygiene inspectors offer comprehensive sampling and hygiene assurance for building services systems and food processing surfaces. Here is an overview of the essentials: Advantages: Our inspectors have theoretical and practical experience in plant engineering and are familiar with VDI regulations and ASHRAE guidelines. Their extensive practical experience brings with it outstanding expertise. Sampling and risk assessment: Our inspectors conduct surface sampling using contact or swab samples. The informative laboratory analysis provides information about microbiological or chemical parameters and serves as a risk assessment for operators. Documentation and recurring inspections: The inspectors determine sampling points and document them on inventory plans. They also prepare recommendations for action and risk assessments for operators through regularly recurring sampling. Visual inspection and testing of external work environments: A comprehensive visual inspection and the testing of external workplace environments round out the range of services offered by our inspectors. With our experienced hygiene inspectors, you can ensure hygiene safety and health in your company. Are maintenance contracts necessary? We offer this without restrictive contracts in the BIMcare™ category. Always fully configure supply chains This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™

With independent expert we will prepare you customized advisory and technical reports. This supports to understand, resolve, and professionally document the problem. This provides an objective assessment, dissolving of disputes, clear technical insights, and a reliable basis for further action — be it for repair, negotiation, or prevention. 1. What is being assessed? Each area of expertise requires its own report. Ventilation technology Air conditioning technology Fire protection (dampers, concept, smoke protection) Gas or heat pump heating Refrigeration technology Plumbing technology (drinking water) Electrical engineering (low voltage, meter cabinet) Building automation (switch cabinet) Energy consulting & renovation ️2. Where about is advise requested? 🌡️ Heating, ventilation, air conditioning – problems or failures 📉 Loss of value / building damage 🚧 Defects in existing buildings, during renovation, or during new construction 3. What do you need the appraisal for? 🧑‍🏫 Technical advisory report 🏡 Assistance with home purchase 🏗️ Accompaniment during building inspections 📊 Property valuation 4. Which services are required? Assessment of Responsibilities Repair Recommendations Energy Efficiency BIMaudit™ Process ✔️ You submit documents, photos, and data digitally. ✔️ The appraiser reviews and prepares an individual report. ✔️ Optional: Additional services such as BIM management can be booked. Always fully configure supply chains The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).

Whenever you have any damages to your building's technology - We are there whether it's water damage, no heating, or a dispute with improvements – with this you will receive a customised report from our independent building services expert. 1. What is being assessed? Ventilation technology Air conditioning technology Fire protection (dampers, concept, smoke protection) Gas or heat pump heating Refrigeration technology Plumbing technology (drinking water) Electrical engineering (low voltage, meter cabinet) Building automation (switch cabinet) Construction contracts & Building Acceptance ️2. Where did damage occur? 💧 Water damage, burst pipes 🔥 Fire damage, short circuit, power surge 🌫️ Mold, indoor air or odors 🧱 Construction defects or construction delays 📉 Loss of value / building damage 🌪️ Natural event (storm, hail, lightning, flood)> 3. What do you need the appraisal for? ⚖️ Legal dispute / preservation of evidence 🕊️ Mediation or out-of-court settlement 🧾 Review of a construction contract 💰 Submission to insurance / claims settlement 4. Which services are required? Cause of Damage & Condition Assessment Scope documented in detail Estimation of renovation costs Repair recommendations BIMaudit™ Process ✔️ You submit documents, photos, and data digitally. ✔️ The appraiser reviews and prepares an individual report. ✔️ Optional: Additional services such as BIM Management can be booked. Always fully configure supply chains The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).

Independent experts like us are familiar with establishing assessments for each trade of technical building equipment. According to a structured checklist, most condition assessments are one solution for repairs, negotiations, or prevention. 1. What trade is to be assessed? Ventilation ducting technology Air conditioning technology Fire protection (dampers, concept, smoke protection) Gas or heat pump heating Refrigeration technology Plumbing technology (drinking water) Electrical engineering (low voltage, meter cabinet) Building automation (switch cabinets) Energy consumption 2. What are mostly defects? 🏡 Visual Collision Review of BIM Discipline Models 🧱 Construction defects or construction delays 📉 Loss of value / building damage 🚧 Defects during renovation or new construction 3. What appraisals are usual for? ⚖️ Legal disputes / securing evidence 🏗️ Accompanying building inspections 🏡 Assistance with buying a house 4. What services are required? Preservation of evidence with images/measurement data Assessment of responsibilities Support with acceptance or negotiations BIMaudit™ Process ✔️ You submit documents, photos, and data digitally. ✔️ The expert reviews and prepares a customized report. ✔️ Optional: Additional services such as BIM Management can be booked. This package includes the preparation of a report in the following format: Cover sheet Table of contents Description Findings / Evaluation Summary Disclaimer The report can also be provided in tabular form or as a project document on a digital platform upon request. Note: Please book the appropriate number of packages to cover the desired scope of services, depending on the task, building size, and intended use. Always fully configure supply chains The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMpilot™, BIMservice™, or BIM Management. Processing takes place within a 4-day week (Monday–Thursday).

This neutral mediator supports you in disputes concerning technical building equipment. The goal is an amicable solution that ensures the quick and long-term operation of the building technology in an appropriate manner. Dispute resolution for building technology and contractual issues As a neutral mediator, I conduct individual discussions, identify conflicts, and develop solution-oriented approaches with the parties involved. The goal is a quick, out-of-court settlement – ​​fair, structured, and independently documented. Your advantages: Confidential one-on-one discussions without confrontation Documented attempts at settlement for your protection Legal position remains intact if settlement fails Representatives (attorney, expert) possible No clarification of liability – focus on solutions Termination of mediation: Mutual agreement Declaration of failure Termination by the mediator if there is no prospect of success No payment of the advance fee No participation in Appointments BIMaudit™ Process ✔️ You submit documents, photos, and data digitally. ✔️ The appraiser reviews and prepares an individual report. ✔️ Optional: Additional services such as BIM Management can be booked. Always fully configure supply chains The service is provided remotely (no on-site appointments included). Costs for travel, materials, or additional reviews can be booked separately under BIMdepot™, BIMservice™, or BIM-Management. Processing takes place within a 4-day week (Monday–Thursday).