Comprehensive BIM & Technical Services for Air Conditioning Systems

Gli spostamenti ottimizzati in termini di CO₂ dei nostri tecnici sono parte integrante della vostra catena di approvvigionamento. Vi supportano nel soddisfare in modo affidabile i requisiti legali e interni in materia di sostenibilità e riduzione delle emissioni, senza ulteriore impegno organizzativo. Il vostro vantaggio: Catena di approvvigionamento sostenibile senza sforzi aggiuntivi Ogni spostamento avviene nell’ambito di un concetto complessivo rispettoso del clima. Beneficiate di: Supporto nel rispetto dei requisiti ESG e di sostenibilità Riduzione delle emissioni di CO₂ nella vostra catena di approvvigionamento Integrazione trasparente nella vostra strategia ambientale e di compliance Tempi di intervento pianificabili senza coordinamento aggiuntivo Tempi di ricarica (ca. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h ✅ Wichtig:

Measurement, optimization or consulting? We offer this service on-site or remotely for one hour, tailored to your specific needs. What are the advantages of a BIMcare™ maintenance contract? After maintenance is performed under BIMcare™, we will reimburse 50% of the cost of a fault diagnosis, provided that the resulting repair quotes are commissioned and BIMcare™ is subsequently continued continuously for at least 12 months. Even without BIMcare™, a cost-effective remote service is available via WhatsApp. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

The air conditioning technician for air conditioning and refrigeration systems in buildings, committed to economical and environmentally friendly climates. System mechatronics engineers: Services with a focus on safety, environmental protection, and expertise As air conditioning and refrigeration system mechatronics engineers, we master a broad spectrum of skills spanning mechanical, electronic, and electrical trades. Our services range from precise leak tests to fine-tuning and factory settings of the refrigeration circuit. Our range of services includes: Accurate leak tests: We perform precise leak tests to ensure the proper functioning and longevity of your systems. Adjustment and factory filling of the refrigeration circuit: Our expertise extends to the fine-tuning and correct filling of the refrigeration circuit to ensure optimal performance. Personal protection and environmental protection measures: We attach great importance to protecting the safety of people and the environment. This includes measures to protect groundwater from oil loss in refrigeration systems and from leaks in closed systems containing climate-damaging gases. These protective measures extend throughout the entire installation and operation process to ensure safe operation. Why Choose Us? We are internationally recognized for our contributions to environmental protection and safety in building operations. Expertise and access to AI technologies: Our many years of experience and advanced knowledge in the field of artificial intelligence enable us to offer innovative solutions and stay at the cutting edge of technology. Choose us as your plant mechatronics partner to receive first-class services that combine safety, environmental protection, and expertise. Always fully configure supply chains This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

The building's ventilation technician for supply and exhaust air handling units ensures draft-free and freshly filtered indoor air. Expertise for optimal indoor air quality Our system mechatronics engineers are specialists in supply and exhaust air systems. With comprehensive expertise, we install, maintain, and optimize multi-leaf dampers, air filter units, fire dampers, and other essential components of indoor air technology. As masters of ventilation technology, we deliver internationally recognized solutions and rely on the latest technologies, including AI-supported optimization of related trades. Efficient air filtration for clean indoor air Intelligent ventilation concepts for energy savings Professional maintenance and repair for maximum operational reliability BIM-Service – for air quality that impresses. Always fully configure supply chains This ideally only applies to a 4-day week from Monday to Thursday. This is not an all-inclusive package. Travel costs and work materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphases™

Gli spostamenti ottimizzati in termini di CO₂ dei nostri tecnici sono parte integrante della vostra catena di approvvigionamento. Vi supportano nel soddisfare in modo affidabile i requisiti legali e interni in materia di sostenibilità e riduzione delle emissioni, senza ulteriore impegno organizzativo. Il vostro vantaggio: Catena di approvvigionamento sostenibile senza sforzi aggiuntivi Ogni spostamento avviene nell’ambito di un concetto complessivo rispettoso del clima. Beneficiate di: Supporto nel rispetto dei requisiti ESG e di sostenibilità Riduzione delle emissioni di CO₂ nella vostra catena di approvvigionamento Integrazione trasparente nella vostra strategia ambientale e di compliance Tempi di intervento pianificabili senza coordinamento aggiuntivo Tempi di ricarica (ca. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h ✅ Wichtig:

Gli spostamenti ottimizzati in termini di CO₂ dei nostri tecnici sono parte integrante della vostra catena di approvvigionamento. Vi supportano nel soddisfare in modo affidabile i requisiti legali e interni in materia di sostenibilità e riduzione delle emissioni, senza ulteriore impegno organizzativo. Il vostro vantaggio: Catena di approvvigionamento sostenibile senza sforzi aggiuntivi Ogni spostamento avviene nell’ambito di un concetto complessivo rispettoso del clima. Beneficiate di: Supporto nel rispetto dei requisiti ESG e di sostenibilità Riduzione delle emissioni di CO₂ nella vostra catena di approvvigionamento Integrazione trasparente nella vostra strategia ambientale e di compliance Tempi di intervento pianificabili senza coordinamento aggiuntivo Tempi di ricarica (ca. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h ✅ Wichtig:

Unknown fault with air conditioning? We will find the cause within 3 hours for quick repairs. The advantage of a maintenance contract After maintenance has been carried out as part of BIMcare™, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned and BIMcare™ is then continued for at least 12 months without interruption. Always configure supply chains completely This is ideally suited for a 4-day work week, Monday through Thursday. This is not an all-inclusive package; travel expenses and materials are not included and can be found at BIMdepot™, BIMcare™, BIMpilot™, or BIMphase™. BIMcare™ customers automatically receive a discount on this item.

An error in the construction technology? Within 3 hours we have solutions ready and estimate the repair costs. The construction technology error analysis We inspect, measure, endoscope, dismantle, walk around and find the best way to locate the causes and develop well-founded technical action plans. We are aware that not everything can be done within a few hours, but a structured and precise damage analysis lays the foundation for a sustainable solution. The advantage of our BIM facility management If you use our facility management continuously or as part of BIMcare™ maintenance, we will reimburse 50% of the costs of a fault diagnosis, provided that the resulting repair offers are commissioned or BIMcare™ and facility management are subsequently continued for at least 12 months without interruption. We do always recommend an appropriate BIM-Model of your building. Always configure supply chains completely It is best to work 4 days a week from Monday to Thursday. This is not an all-inclusive package, travel costs and work equipment are not included and these can be found under BIMpilot™ or BIMservice™.

Il pacchetto di messa in servizio comprende l’intervento di un tecnico dal nostro centro assistenza per un massimo di 2 ore. Include un unico viaggio di andata e ritorno per la consegna dei climatizzatori fino al bordo strada e un viaggio separato il giorno successivo per la messa in servizio. L’installazione del climatizzatore deve essere effettuata da un installatore abilitato e certificato indicato dal cliente, che assume anche la responsabilità della garanzia. In assenza di tale prova, la consegna non avverrà. Ci riserviamo il diritto di stoccare la merce applicando il 10% del prezzo dell’unità. Ambito del pacchetto di messa in servizio Intervento tecnico: 1 tecnico per un massimo di 2 ore Costi di viaggio: Inclusi fino a 100 km a tratta; chilometri aggiuntivi a consumo Pernottamento: Incluso Consegna materiali: Consegna a bordo strada; trasporto interno a cura dell’installatore certificato Messa in servizio: Collegamento delle linee frigorifere (cartellatura), collegamento elettrico, evacuazione dell’impianto, prova di tenuta secondo normativa vigente e test funzionale. Eseguito esclusivamente da noi. Servizi aggiuntivi (opzionali, a pagamento) Collegamento elettrico (interruttore differenziale, magnetotermici, ecc.) Distanze superiori a 100 km Supplementi di pernottamento Lavori speciali (nuova messa in servizio) Integrazione WLAN o KNX Fornitura di ponteggi o piattaforme elevatrici Personale per la movimentazione dei materiali Reso e recesso Poiché i climatizzatori sono configurati su richiesta del cliente, resi o rimborsi sono esclusi finché non viene fornita prova di installazione da parte di un installatore abilitato. La consegna viene sospesa o stoccata a pagamento. Il diritto di recesso ai sensi del § 355 BGB è escluso. Il cliente è tenuto a fornire la prova prima della consegna. Solo dopo la verifica avvengono consegna e messa in servizio. Nota su installazione di emergenza In caso di emergenza assoluta, l’installazione può essere eseguita da noi con supplemento e solo su richiesta esplicita. La messa in servizio è effettuata esclusivamente dai nostri tecnici secondo il Regolamento UE (UE) 2024/573. L’installazione resta responsabilità dell’installatore certificato.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 12 hours of team effort (2 technicians) Travel: up to 30 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 30 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 14 hours of team effort (2 technicians) Travel: up to 30 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 30 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 16 hours of team effort (2 technicians) Travel: up to 30 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 30 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 16 hours of team effort (2 technicians) Travel: up to 60 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 60 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

Gli spostamenti ottimizzati in termini di CO₂ dei nostri tecnici sono parte integrante della vostra catena di approvvigionamento. Vi supportano nel soddisfare in modo affidabile i requisiti legali e interni in materia di sostenibilità e riduzione delle emissioni, senza ulteriore impegno organizzativo. Il vostro vantaggio: Catena di approvvigionamento sostenibile senza sforzi aggiuntivi Ogni spostamento avviene nell’ambito di un concetto complessivo rispettoso del clima. Beneficiate di: Supporto nel rispetto dei requisiti ESG e di sostenibilità Riduzione delle emissioni di CO₂ nella vostra catena di approvvigionamento Integrazione trasparente nella vostra strategia ambientale e di compliance Tempi di intervento pianificabili senza coordinamento aggiuntivo Tempi di ricarica (ca. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h ✅ Wichtig:

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 100 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 100 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

La nostra soluzione sostenibile e orientata al cliente consente il trasporto sicuro ed efficiente di persone e merci consentite su rotte aeree internazionali e all’interno dell’Europa. Combiniamo velocità, responsabilità ambientale e sicurezza giuridica per i vostri trasporti. Cosa trasportiamo Specialisti per incarichi presso la destinazione Merci consentite, pezzi di ricambio e documenti Altri beni non deperibili e non pericolosi conformi alle normative aeronautiche internazionali Cosa non trasportiamo Per motivi di sicurezza e legali, non possiamo trasportare i seguenti beni: Animali di qualsiasi tipo Prodotti refrigerati o congelati Merci pericolose o vietate per legge Batterie (ad es. LiFePO4) o altre batterie al litio in grandi quantità Liquidi oltre i limiti consentiti per il trasporto aereo Gas, contenitori a pressione o sostanze compresse Sostanze esplosive, infiammabili o chimicamente aggressive Altri beni vietati dalle normative aeronautiche o di sicurezza internazionali Avviso al cliente: ritiro a destinazione Il nostro servizio include esclusivamente, a seconda dell’opzione, il trasporto aereo nazionale o internazionale. La consegna all’interno del paese di destinazione o i trasporti nazionali in loco non sono inclusi. Il cliente deve ritirare la merce presso la destinazione salvo prenotazione di trasporto locale. Il trasporto avviene solo dal nostro magazzino su una singola tratta. Mobilità a destinazione, deposito, parcheggio, trasferimenti e alloggio sono opzionali e a carico e organizzazione del cliente. Il prezzo totale dipende dalle opzioni selezionate. Il vostro vantaggio Disponibilità rapida e pianificabile di specialisti e merci Esecuzione sostenibile, efficiente e conforme alla legge Inglese come lingua commerciale per operazioni internazionali Composizione del prezzo totale Descrizione Prezzo in EUR IVA esclusa 1. Mobilità al luogo di partenza 200.00 2. Mobilità a destinazione 200.00 3. Biglietto andata e ritorno extra UE per persona 2,100.00 4. Biglietto andata e ritorno UE per persona 300.00 4. Supplemento solo andata per 31 kg di carico 300.00 5. Costi parcheggio/trasferimento per luogo e veicolo/mese se necessario 150.00 6. Pernottamento per notte/persona 120.00

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 150 km (one way) Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 150 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 200 km (one way) Accomodation: included Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 200 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 300 km (one way) Accomodation: included Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 300 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.

The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system. Delivery | Setup | Commissioning | Handover Scope of Services Working time: Total 20 hours of team effort (2 technicians) Travel: up to 400 km (one way) Accomodation: included Material delivery: ordered units, components, installation sets delivered curbside Installation: indoor and outdoor units including piping System check: pressure test, vacuum, leak test, and functional run Commissioning: complete documented handover in operational condition Instruction: operation, basic functions, and maintenance guidance Additional services to be ordered separately Electrical connection (fuse connection, RCD/MCB, repair switch) Additional kilometers beyond 400 km Overnight costs for longer distances or multi-day assignments Special work (core drilling, wall penetrations, pipe adjustments) Condensate pump, funnel siphon, or connection to existing lines Connection or integration with Wifi or KNX Provision of scaffolding from 2 m working height, crane transport, lifts Provision of special tools and equipment for dismantling Construction and follow-up work: masonry, painting, roofing, and similar trades This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists. NOTE: Fixed-price packages may include delivery and/or installation by service technicians using special tools and specialized vehicles, as well as customer-specific assembled and pre-picked materials and service infrastructure. Personnel, materials, and resources are reserved exclusively. Cancellation after booking is not possible (§ 312g Abs. 2 BGB / EU Consumer Rights Directive 2011/83/EU). The installation date is scheduled once after booking and is only available within the specified season. This also applies if performance cannot be carried out for reasons attributable to the customer, including lack of cooperation or unavailability at the scheduled time.