Original MS-1633 replacement hose for peristaltic kneading pumps of the ASPEN Condensate Pump PERI. Easy swap, reliable performance, durable spare part.

The new Peri Pro+ is a float-operated condensate pump offering exceptional reliability with an industry-leading 5-year warranty*. Based on stepper motor technology and software control, this version features intelligent pumping technology similar to the latest mini-pumps – always with the goal of minimizing noise and hose wear. The Peri Pro+ is ideally suited for split systems with high walls, ducted units, and floor-standing and chassis units. It's perfect for hotel rooms and other remote installation locations. *Hose not included and subject to proper installation and operation.

The new and improved 5th generation Silent+ Mini Lime is the quietest corner duct pump on the market at just 16 dB(A). Quick, easy, and flexible to install with proven technology, high flow performance, and low power consumption. Maximum performance, high reliability, and energy efficiency at near-silent operation. Ideal for comfort and commercial areas where low noise is critical. Features: Backward-compatible Plug & Play cable Compatible with all common duct systems Fast installation – no vibration damper or anti-siphon valve required Flow rate up to 40 l/h with up to 10x lower power consumption Suitable up to 46 kW / 157000 Btu/h Vibration damper for quiet operation Pump can be installed in duct angle, left or right Various duct systems available Easy maintenance Included: Silent+ Mini Lime pump with 1.5 m fixed power cable Construction with vibration damper and backflow protection 500 mm inlet hose (14 mm ID) 40 mm PVC vent hose (6 mm ID) Pump angle 800 mm straight duct (not for OEM) Seal and ceiling penetration Inlet adapter Mounting kit Installation manual

Hygienic - Professional - Simply Practical. Air conditioning units can only capture condensate or residual water with this funnel siphon, which directs it cleanly and separately from the sewage system into the drain. This oval funnel is made of durable white plastic and can be installed tightly against almost any wall. Its narrow and short shape allows installation in hard-to-reach areas that must remain accessible for maintenance purposes. Suitable for the standard DN 50 outlet. The adjustable range of 220 to 340 mm allows for easy, precise mounting at the correct height. The product is practically pre-assembled and includes the dip tube, wall pipe, and funnel. The bend can be easily removed for cleaning and reassembled. Secure tightening is done by hand using sturdy, craftsmanship-grade union nuts. The high-quality plastic is break-resistant, resistant to household cleaning agents, and features smooth, pore-free surfaces. Please note: This siphon is suitable as a replacement for ball siphons that can handle different overpressure or underpressure situations. Purpose: For catching residual water / leak water Material: PP - Polypropylene Color: White Nominal size DN outlet: DN 50 Temperature resistance min./max.: 0 to 100 °C Short-term maximum temperature resistance: 130 °C Height min./max.: 220-340 mm Height 2: 124 mm Length: 300 mm

HI-PVC 90° elbow, 20mm, PN16, solvent weld fitting, socket on both sides

HI-PVC 90° elbow, 25mm, PN16, solvent weld fitting, socket on both sides

HI-PVC pipe 20x1.5mm PN16 hard in bars of 5m

HI-PVC pipe 25x1.5mm PN6 hard in bars of 5m

The highly flexible, resin-based paste reliably seals threaded and flange connections as well as gasket and mating surfaces. Ideal for new installations, leak tests, repairs, or warranty replacements. LEAK LOCK® adheres to metal and plastic surfaces, fills cavities, and withstands extreme vibrations, temperatures from -73°C to +204°C, and pressures up to 688 bar. It reliably seals chemicals, refrigerants, petroleum products, gases, steam, water, and compressed air. Clean surfaces with alcohol before use. Content: 40 g

Xtra PVC Hose connector 6mm

Transparent, reinforced PVC hose for connecting pumps to condensate drainage. Flexible, durable, and suitable for temperatures from -20 to +60 °C. Perfect for commercial and domestic applications. Technical Data: Type: ACC00914 Design: Reinforced PVC hose Roll length: 50 m Inner diameter: 6.3 mm Outer diameter: 11.4 mm Max. operating pressure: 22 bar Total weight: 4.5 kg / 50 m Operating temperature: -20 to +60 °C Ideal for safe and flexible pump connections to condensate drains, offering high durability and long service life.

The perfect glue for previously cleaned HI-PVC U pipes and fittings

Cáñamo para sellado de roscas se utiliza para sellar roscas metálicas en combinación con pasta de sellado. Garantiza conexiones fiables y duraderas. Contenido: bobina 80 g Para usar con pasta de sellado Apto para roscas metálicas Aplicación: Enrolle el cáñamo alrededor de la rosca, aplique la pasta de sellado y monte la conexión. Proporciona un sellado seguro y duradero.

Cinta selladora PTFE utilizada para sellar conexiones roscadas, especialmente roscas finas hasta DN 10. Resistente a medios agresivos, no adhesiva, evita el agarrotamiento. Material: Politetrafluoroetileno Peso por m²: 60 g Espesor: 0,1 mm Ancho: 12 mm Longitud: 12 m Certificación: DVGW Temperatura: -240 a 240 °C Presión máx.: 25 bar Sin silicona Libre de plomo, estaño, SCCP, MCCP, LCCP, disolventes, plastificantes KWS, propelentes halogenados, HBCD y granulado de neumáticos reciclado SVHC según REACH < 0,1 % Aplicación: Permite alinear las roscas con posibilidad de giro limitado. Temperatura y presión dependen del medio y son orientativas.

Lubricante especial para tubos HT es un lubricante respetuoso con el medio ambiente para uniones de tuberías plásticas. Totalmente biodegradable Libre de cloro, formaldehído y aromáticos policíclicos Sin componentes perjudiciales para la salud Incoloro, sin silicona y soluble en agua Protege las tuberías durante el montaje y facilita la inserción y alineación. Aplicación: Limpiar la unión, colocar la junta, aplicar lubricante y ensamblar. Enjuagar las tuberías antes del uso.

Masilla de instalación es una masa sellante plástica para todo tipo de instalaciones sanitarias. Especialmente indicada para montar grifería en lavabos y bañeras. Envase: Lata Peso neto: 500 g Resistente a la temperatura: hasta 100 °C Libre de SCCP, MCCP, LCCP, plomo, cadmio, cromo-VI, plastificantes KWS, disolventes, halógenos, PBDE y granulados de neumáticos reciclados SVHC según REACH < 0,1 % Aplicación: Forme un cordón de masilla, introdúzcalo en juntas limpias y secas y presione firmemente. No usar sobre superficies porosas como mármol.

Pasta para sellado de roscas se utiliza para sellar roscas metálicas junto con cáñamo. Aprobada por DVGW para gas, agua potable (fría/caliente) y calefacción (NV-5142BM0126, clase ARp). Envase: Tubo Peso neto: 150 g Rango de temperatura: -20 a 100 °C Sin silicona Libre de plomo, cadmio, cromo VI, SCCP, MCCP, LCCP, disolventes, halógenos, PBDE y granulados de neumáticos reciclados SVHC según REACH < 0,1 % Aplicación: Combinar con cáñamo para un sellado seguro de roscas metálicas. Adecuado para gas, agua potable y calefacción.