Sanitary & Drinking Water Facilities – Technical Services

This pallet truck is used by our technician for the proper movement and positioning of heavy or bulky pallet goods, especially IBC containment trays or packaged equipment or parts. The maximum load capacity is 2200 kg, which can only be achieved on flat, smooth and load-bearing surfaces. For various tasks we additionally recommend the following equipment: If this item is listed in your sales channel as a rental product, shipment should generally be carried out using the Coolenvi™ service vehicle. Please note that these leased items cannot be shipped by air freight for logistical reasons. If you are located on an island or outside the country, please check shipping methods and equipment availability in advance to avoid delays. Coolenvi™ is a certified specialist company for sustainable services in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.

The Hose Trolley is a strong and resilient hose for rental use. Itt supports in different environments to fill or discharge variants of technical facilities only if they containt non-hazardous water based media. This Set provides also a standard couple adapter from 3/4 inch to 1/2" connectors. Diameter: 1/2" Length: 20 m Sustainability & Service: Cleaning after use is included in the rental price. Optional return logistics are available. Recommended accessories: Extraction pump Mixing tank for glycol preparation Manual filling pump station Leak test equipment and sealing accessories If listed as a rental item in your distribution channel, the product is typically shipped via a dedicated service logistics system. Air freight is not permitted for these rental items. For island or overseas operations, shipping feasibility must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.

This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads. For various tasks, we also recommend the following equipment: If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This mobile scaffold is used by our technician for the professional installation of various system components, most commonly on façades, hard-to-access areas, or roof sections. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, it should normally be shipped with the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company in the field of sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This personal protective equipment, consisting of a fall arrest harness and accessories, is used by our technician for professional inspection, supervision, work, installation and positioning on roofs or during work at height, mainly on façades, roofs, access balconies, balconies, balustrades or industrial facilities. Anything that cannot be reached safely or economically usually requires the use of a suitable lifting platform or aerial work platform. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with Regulation 303/2008 on chemicals and climate protection and Implementing Regulation (EU) 2015/2066.

This professional pressure and leak testing system is an all-in-one solution for compliant testing of gas, LPG, water and wastewater pipelines. The unit enables fully automated test sequences and combines measurement, testing and documentation in one compact system. Technical & Functional Features Suitable for gas, LPG, water and wastewater lines Test range up to 20 bar Integrated compressor for automatic pressure build-up up to 1.5 bar Automated test sequences for repeatable results DVGW-certified testing methodology Integrated pressure and leakage measurement Documentation & Process Reliability The system includes a built-in printer for on-site documentation of all test procedures. Test reports are generated instantly and stored in a revision-safe manner, ensuring compliant workflows on site. Application Benefits The all-in-one solution reduces setup time, minimizes error sources and enables safe pressure and leak testing. Automated processes simplify operation and significantly improve process quality. Scope of Delivery Pressure and leak testing device with integrated compressor, printer unit and system-relevant accessories according to configuration. Use exclusively within BIMdepot rental conditions and by appropriately qualified professionals. If listed as a rental item, it must generally be shipped with the Coolenvi™ service vehicle. Air freight is not permitted due to logistical restrictions. For island or overseas deployments, please verify shipping method and availability in advance. Coolenvi is a certified specialist company in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.

The IBC container 600 L (REKO) is a reconditioned industrial container for rental use for safe storage, mixing and internal handling of glycol solutions. In particular, Antifrogen type N is classified as dangerous goods and must under no circumstances be disposed of via public sewage systems or by contaminating groundwater. Use is exclusively intended for compatible, non-hazardous media. Not suitable for acids, highly aggressive chemicals or other hazardous substances. The container must be cleaned by the lessee prior to return or can optionally be processed via a recycling concept including disposal costs. Transport costs are not included and can optionally be booked via BIMconnect™. Sustainability & Service: The inner container is made of HDPE (transparent/natural) and allows easy and safe level monitoring. A stable steel grid frame ensures mechanical durability in daily use, while the robust plastic pallet enables flexible internal transport with pallet trucks or forklifts. Volume: 600 litres Inner container material: HDPE Pallet: plastic, forklift accessible Filling opening: 225 mm Outlet valve: 2" sliding valve DN50 Outlet coupling: 3/4" valve with hose connection Dimensions: 1200 × 800 × 1013 mm Condition: REKO (cleaned, inspected) Approval: no UN dangerous goods approval For different applications we also recommend: Antifrogen L - antifreeze fluid Extraction pump Hose trolley Mixing tank for glycol preparation Manual pressure filling pump station Leak test station, sealing compounds and additional accessories If the item is listed as a rental product in your distribution channel, it is typically shipped together with the Coolenvi™ service vehicle. Please note that due to logistical restrictions these rental items cannot be shipped by air freight. For island or overseas operations, shipping feasibility and availability must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.

The electric filling pump for glycol brines and water-based heat transfer fluids is a compact and powerful solution for fast filling of heating, solar, and heat pump systems. It is designed for professional use by certified contractors. The pump is suitable for water and water-like, non-flammable fluids. Use with oils, fuels, or other flammable liquids is not permitted. Technical data Power supply230 V mains operation Power consumption800 W Flow rateup to 3,300 l/h Max head46 m Suction height9 m MaterialStainless steel housing Dimensions (L × W × H)29.5 × 37 × 29 cm Weight8.1 kg Delivery scope Electric filling pump 4 m suction hose with foot valve and filter screen Application notes Filling and flushing of closed-loop systems Not suitable for continuous circulation operation Suitable for water and glycol-water mixtures Thorough cleaning required after use with brine media Self-priming design for mobile use Description The electric filling pump enables efficient and reliable filling of heating, solar, and heat pump systems. Its compact design allows flexible mobile use on construction sites and during maintenance work. Recommended accessories IBC collection tank Pressure hoses for pump outlet Transport solutions for glycol brines Pressure testing equipment before filling Antifrogen L and compatible fluids Shipping and usage notes If offered as a rental item, shipping is typically carried out together with a service vehicle. Due to logistical and transport restrictions, air freight is not available. For island or non-mainland locations, transport feasibility must be verified in advance. BIMdepot is a certified technical provider in accordance with European chemical and climate protection regulations, including Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066. When handling glycol brines, water protection regulations must be observed to protect soil and groundwater.

This super assembly lift is used by our technician as a platform carrier for the professional installation of various system components, particularly HVAC and ventilation equipment beneath unfinished ceilings. The standard lifting height is up to 3.80 m. For installing heavier loads on façades, an additional fork lift with a lifting height of up to 2.51 m is available. For working heights exceeding 2 m, we generally recommend ordering suitable scaffolding. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

The BIMdepot drinking water test kit enables professional sampling and laboratory analysis of drinking water at one defined sample-taking point. Samples are collected in certified containers and sent to an accredited laboratory for analysis and evaluation. The results provide a reliable basis for assessing water quality and potential contamination from chemical or biological parameters. Sampling and evaluation should be performed by qualified professionals. 🔬 Analysis scope Depending on the selected variant, the following parameters are analyzed: Chemical parameters: Lead (Pb), Nickel (Ni), Copper (Cu) Biological parameters: Coliform bacteria, Enterococci, Pseudomonas aeruginosa, Legionella 📦 Variant overview Direct | Heavy metals & chemistrySelf-sampling for chemical analysis Direct | Bacteria & microbiologySelf-sampling for microbiological testing Direct | Full analysisSelf-sampling for combined chemical and biological analysis Accredited & supervised | Heavy metals & chemistryAccredited sampling with coordinating support for heavy metals Accredited & supervised | Bacteria & microbiologyAccredited sampling with coordinating support for hygiene Accredited & supervised | Full analysisAccredited sampling with coordinating support for complete water analysis ⚠️ Important notes Valid for one sampling location only. Additional kits required for multiple locations. Laboratory shipping included unless otherwise stated. Coordinating On-site services available separately. 📊 Results & Benefits Laboratory analysis provides detailed measurements and a verifiable assessment of water quality. It serves as a basis for professionals to initiate or maintain technical measures, optimize hygiene, or provide legal documentation. Completely configure supply chains For complete implementation, we recommend booking a coordinating BIM Facility Manager or VDI Hygiene Inspector as a certified professional, typically for 4 days per week (Monday to Thursday). Note: This offer is not all-inclusive. Travel expenses and equipment are not included and can be booked optionally in the categories BIMconnect, BIMpilot, or BIMservice.

BIMdepot contact and swab sampling set for surface analysis professionals: Includes 5 round agar plates in Petri dishes and 5 swabs for surface sampling – ideal for air filters, condensate trays, interior walls, air-handling components, food areas, or refrigeration units. Sample evaluation and report generation (e.g. according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user. Swabs are recommended for hard-to-reach or uneven surfaces. Note: More than 5 samples require additional kits. Microbial and bacterial analysis On TTC agar, most bacteria grow as red colonies – some fungi and yeasts may also appear. Colorless colonies are also counted. The key factor is Colony Forming Units (CFU), not colony size. At high contamination levels, the surface may appear uniformly colored or colorless due to heavy growth. Comparison with a fresh medium helps avoid misinterpretation. Reference values: < 10⁴ CFU/ml = low contamination 10⁴ – 10⁶ CFU/ml = moderate contamination > 10⁶ CFU/ml = high, unacceptable contamination Important notes This analysis kit does not include PPE, on-site sampling, or services. Transport, consulting, action planning & result interpretation are booked separately. Coordinated or extended deployments require separate booking. Create professional supply chains For full process and sampling support, booking a coordinating BIM Facility Manager or VDI hygiene inspector is recommended (Mon–Thu, 4 days/week). Note: Work equipment and travel costs are not included – see BIMconnect, BIMpilot or BIMservice.

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort. Your Advantage: A Sustainable Supply Chain Without Additional Effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Plannable operations without additional coordination effort Charging Times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting legal and internal requirements for sustainability and emission reduction – without additional organizational effort. Your advantage: Sustainable supply chain without additional effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Predictable deployment times without additional coordination Charging times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

The CO₂-optimized travel of our technicians is an integral part of your supply chain. It supports you in reliably meeting both regulatory and internal sustainability and emissions reduction requirements – without any additional organizational effort. Your Advantage: A Sustainable Supply Chain Without Additional Effort Each journey is carried out as part of a climate-friendly overall concept. You benefit from: Support in meeting ESG and sustainability requirements Reduction of CO₂ emissions within your supply chain Transparent integration into your environmental and compliance strategy Plannable operations without additional coordination effort Charging Times (approx. 25 kWh / 100 km) Distance AC 3.7 kW AC 7.4 kW DC 100 kW Route Total ~22 h (0–100%) ~11 h (0–100%) ~40 min (0–100%) Up to 50 km 100 km 7 h 3:30 h 0:40 h 51–100 km 200 km 14 h 7 h 0:50 h 101–150 km 300 km 20 h 10:30 h 1 h 151–200 km 400 km 26:40 h 14 h 1:30 h 201–250 km 500 km 33:30 h 18 h 2 h 251–300 km 600 km 40 h 21 h 2:30 h 301–500 km 1000 km 67 h 35 h 4 h 501–600 km 1200 km 80 h 41:30 h 4:30 h 601–800 km 1600 km 107 h 55 h 5:30 h 801–1000 km 2000 km 133 h 69 h 8 h

Our sustainable and customer-friendly solution enables the safe and efficient transport of people and permitted goods on international flight routes and within Europe. We combine speed, environmental responsibility, and legal certainty for your transport needs. What we transport Specialists for assignments at the destination Permitted goods, spare parts, and documents Other non-perishable, non-hazardous goods compliant with international aviation regulations What we do not transport For safety and legal reasons, we cannot transport the following goods: Animals of any kind Chilled or frozen goods Hazardous or legally prohibited goods Batteries (e.g. LiFePO4) or other lithium batteries in large quantities Liquids exceeding permitted air transport limits Gases, pressure containers, or compressed substances Explosive, flammable, or chemically aggressive substances Other goods prohibited under international aviation or safety regulations Customer notice: Pickup at destination Our service exclusively includes, depending on the option, national or international air transport. Delivery within the destination country or domestic transport at the destination is not included. The customer must collect the goods at the destination unless local transport has been booked. Freight is only transported from our warehouse on one route. Mobility at the destination, storage, parking, transfer, and accommodation costs are optional and must be borne and arranged by the customer. The total price depends on the selected options. Your advantage Fast and predictable availability of specialists and goods Sustainable, efficient, and legally compliant execution English as the business language for international operations Total price composition Description Price in EUR excl. VAT 1. Mobility at departure location - no Km 200.00 2. Mobility at destination - no Km 200.00 3. Non-EU round-trip ticket per person 2,100.00 4. EU round-trip ticket per person 300.00 5. One-way surcharge per 31 kg freight 300.00 6. Parking / transfer costs per location per vehicle/month if required 150.00 7. Overnight stay per night / person 120.00

If our staff is required on site, please also book the corresponding accommodation costs together with other BIM packages. Choose according to the defined location This accommodation package is valid for one person. It is provided as part of BIM Facility Management, BIMcare™, BIMservice™ or BIM-Management depending on route planning, seasonal requirements or urgency. Please note that this package must be booked on a daily basis and in line with the order: In the event of deviations, subsequent bookings are required before the contract is concluded, as no one should sleep on the street and we attach great importance to an optimal working atmosphere. If the employees work more than 4 days per week, overnight accommodation must be booked according to the daily flat rate, including at weekends. If the duration of the business trip or the travel times are not sufficient, weekends must be considered as standby time, but must be booked separately by the customer and at their own expense. Fully configure supply chains Ideally, a booking of 4 days per week, Monday to Thursday, is recommended. Please note that this is not an all-inclusive offer. Travel costs and work equipment are not included and can be found under BIMpilot™ or BIMservice™.