BIMdepot™ – Operational Equipment Rental for Our Technicians

This personal protective equipment, consisting of a fall arrest harness and accessories, is used by our technician for professional inspection, supervision, work, installation and positioning on roofs or during work at height, mainly on façades, roofs, access balconies, balconies, balustrades or industrial facilities. Anything that cannot be reached safely or economically usually requires the use of a suitable lifting platform or aerial work platform. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with Regulation 303/2008 on chemicals and climate protection and Implementing Regulation (EU) 2015/2066.

This pressure reducer is used by our technicians for commissioning, leak testing and soldering work on refrigeration systems. For various tasks, we also recommend the following equipment: Recycled bottle Refrigeration fitting Disposal station Nitrogen Nitrogen for pressure testing before filling refrigeration circuits Fresh refrigerant and much more... If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This leak scanner is used by our technicians for assessments, leak testing and environmental important measures and documentation on refrigeration cycless. For various tasks, we also recommend the following equipment: Recycled bottle Refrigeration fitting Disposal station Nitrogen for pressure testing before filling refrigeration circuits Fresh refrigerant and much more... If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This aid as a pressure gauge battery is used by our technicians for all work on refrigeration circuits and air conditioning systems. For various tasks, we also recommend the following equipment: Nitrogen nitrogen gas bottle for pressure tests Refrigerant scale for collection or disposal Vacuum pump before recommissioning In addition to fresh refrigerant, there is much more... If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

The cable locator device is used by our technicians for quickly finding individual wires, defective cables or testing before connection or any wiring might change or is confusing. We also recommend the following equipment for various tasks: Appliance Tester Cable Tester and much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

The data cable tester was specially developed for quick on-site testing of connection and network cables only by our technicians. The tester has an RJ-11, RJ-45, IEEE 1394 (Firewire) and USB output socket. In addition, coaxial network cables can also be tested using the BNC connection. We also recommend the following equipment for various tasks: Appliance Tester Cable Tester Installation Tester and much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This vacuum pump is used by our technicians to evacuate each refrigerant cycle once new installed for commissioning or after replacement of fitted appliances. For various tasks, we also recommend the following equipment: Recycled bottle Refrigeration fitting Disposal station Nitrogen Nitrogen for pressure testing before filling refrigeration circuits Fresh refrigerant and much more... If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This scale is used by our technicians to accurately measure the amount of refrigerant during both filling and disposal processes. For various tasks, we also recommend the following equipment: Recycled bottle Refrigeration fitting Disposal station Nitrogen Nitrogen for pressure testing before filling refrigeration circuits Vacuum pump after pressure testing Fresh refrigerant and much more... If the item is listed in your sales channel as a rental, it must typically be shipped together with the Coolenvi service vehicle. Please note that these rented items cannot be shipped via air freight due to logistics restrictions. If your service location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This pallet truck is used by our technician for the proper movement and positioning of heavy or bulky pallet goods, especially IBC containment trays or packaged equipment or parts. The maximum load capacity is 2200 kg, which can only be achieved on flat, smooth and load-bearing surfaces. For various tasks we additionally recommend the following equipment: If this item is listed in your sales channel as a rental product, shipment should generally be carried out using the Coolenvi™ service vehicle. Please note that these leased items cannot be shipped by air freight for logistical reasons. If you are located on an island or outside the country, please check shipping methods and equipment availability in advance to avoid delays. Coolenvi™ is a certified specialist company for sustainable services in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.

The Hose Trolley is a strong and resilient hose for rental use. Itt supports in different environments to fill or discharge variants of technical facilities only if they containt non-hazardous water based media. This Set provides also a standard couple adapter from 3/4 inch to 1/2" connectors. Diameter: 1/2" Length: 20 m Sustainability & Service: Cleaning after use is included in the rental price. Optional return logistics are available. Recommended accessories: Extraction pump Mixing tank for glycol preparation Manual filling pump station Leak test equipment and sealing accessories If listed as a rental item in your distribution channel, the product is typically shipped via a dedicated service logistics system. Air freight is not permitted for these rental items. For island or overseas operations, shipping feasibility must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.

This measuring device is used by our technicians to measure air flow at air vents and in air ducts. We also recommend the following equipment for various tasks: Air quality meter Sound level meter Smoke test sticks and much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

Portable multifunction dosimeter for detecting ionizing radiation (beta, gamma, X-ray). Intended for internal use and supervised external operations. Real-time measurement, data logging and multi-alarm system compliant with common standards. For various tasks, we additionally recommend the following equipment: If this item is offered as a rental product in your sales channel, shipment should generally be carried out using a Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. You are advised to order the operational use of personal protection equipmemnt a OHS Occupational Health and Safety Manager from us, see under category BIMservice.

High-performance wet and dry vacuum cleaner for rental and operational use. Designed for efficient removal of water, sludge, and construction debris on building sites and technical installations. A robust solution for demanding cleaning tasks where high suction power and operational reliability are essential.

The BIMdepot drinking water test kit enables professional sampling and laboratory analysis of drinking water at one defined sample-taking point. Samples are collected in certified containers and sent to an accredited laboratory for analysis and evaluation. The results provide a reliable basis for assessing water quality and potential contamination from chemical or biological parameters. Sampling and evaluation should be performed by qualified professionals. 🔬 Analysis scope Depending on the selected variant, the following parameters are analyzed: Chemical parameters: Lead (Pb), Nickel (Ni), Copper (Cu) Biological parameters: Coliform bacteria, Enterococci, Pseudomonas aeruginosa, Legionella 📦 Variant overview Direct | Heavy metals & chemistrySelf-sampling for chemical analysis Direct | Bacteria & microbiologySelf-sampling for microbiological testing Direct | Full analysisSelf-sampling for combined chemical and biological analysis Accredited & supervised | Heavy metals & chemistryAccredited sampling with coordinating support for heavy metals Accredited & supervised | Bacteria & microbiologyAccredited sampling with coordinating support for hygiene Accredited & supervised | Full analysisAccredited sampling with coordinating support for complete water analysis ⚠️ Important notes Valid for one sampling location only. Additional kits required for multiple locations. Laboratory shipping included unless otherwise stated. Coordinating On-site services available separately. 📊 Results & Benefits Laboratory analysis provides detailed measurements and a verifiable assessment of water quality. It serves as a basis for professionals to initiate or maintain technical measures, optimize hygiene, or provide legal documentation. Completely configure supply chains For complete implementation, we recommend booking a coordinating BIM Facility Manager or VDI Hygiene Inspector as a certified professional, typically for 4 days per week (Monday to Thursday). Note: This offer is not all-inclusive. Travel expenses and equipment are not included and can be booked optionally in the categories BIMconnect, BIMpilot, or BIMservice.

The testing device is used by our technicians to check installation while commissioning or even if in operation to ensure the cleanest supply of electricity for your demand, including electromagnetic compliance. We also recommend the following equipment for various tasks: Appliance Tester Cable Tester and much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This professional pressure and leak testing system is an all-in-one solution for compliant testing of gas, LPG, water and wastewater pipelines. The unit enables fully automated test sequences and combines measurement, testing and documentation in one compact system. Technical & Functional Features Suitable for gas, LPG, water and wastewater lines Test range up to 20 bar Integrated compressor for automatic pressure build-up up to 1.5 bar Automated test sequences for repeatable results DVGW-certified testing methodology Integrated pressure and leakage measurement Documentation & Process Reliability The system includes a built-in printer for on-site documentation of all test procedures. Test reports are generated instantly and stored in a revision-safe manner, ensuring compliant workflows on site. Application Benefits The all-in-one solution reduces setup time, minimizes error sources and enables safe pressure and leak testing. Automated processes simplify operation and significantly improve process quality. Scope of Delivery Pressure and leak testing device with integrated compressor, printer unit and system-relevant accessories according to configuration. Use exclusively within BIMdepot rental conditions and by appropriately qualified professionals. If listed as a rental item, it must generally be shipped with the Coolenvi™ service vehicle. Air freight is not permitted due to logistical restrictions. For island or overseas deployments, please verify shipping method and availability in advance. Coolenvi is a certified specialist company in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.

The testing device is used by our technicians to regularly check office and household appliances for electrical safety. We also recommend the following equipment for various tasks: Installation Tester Cable Tester and much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

BIMdepot contact and swab sampling set for surface analysis professionals: Includes 5 round agar plates in Petri dishes and 5 swabs for surface sampling – ideal for air filters, condensate trays, interior walls, air-handling components, food areas, or refrigeration units. Sample evaluation and report generation (e.g. according to VDI 6022, HACCP, or GMP) are not included and are the responsibility of the user. Swabs are recommended for hard-to-reach or uneven surfaces. Note: More than 5 samples require additional kits. Microbial and bacterial analysis On TTC agar, most bacteria grow as red colonies – some fungi and yeasts may also appear. Colorless colonies are also counted. The key factor is Colony Forming Units (CFU), not colony size. At high contamination levels, the surface may appear uniformly colored or colorless due to heavy growth. Comparison with a fresh medium helps avoid misinterpretation. Reference values: < 10⁴ CFU/ml = low contamination 10⁴ – 10⁶ CFU/ml = moderate contamination > 10⁶ CFU/ml = high, unacceptable contamination Important notes This analysis kit does not include PPE, on-site sampling, or services. Transport, consulting, action planning & result interpretation are booked separately. Coordinated or extended deployments require separate booking. Create professional supply chains For full process and sampling support, booking a coordinating BIM Facility Manager or VDI hygiene inspector is recommended (Mon–Thu, 4 days/week). Note: Work equipment and travel costs are not included – see BIMconnect, BIMpilot or BIMservice.

The Dräger Air Flow Tester enables the fast and reliable visualization of even the smallest air movements. The proven smoke tube system generates a clearly visible white smoke, allowing air movements, leakages and flow directions to be identified immediately. Ideal for industrial applications, cleanrooms, laboratories, ventilation systems, mining and safety-critical environments. Your Benefits ✔ Visualization of even the smallest air movements ✔ Fast leak detection in airtight systems ✔ Easy application without electrical power supply ✔ Resealable for multiple applications ✔ Immediate indication of air flow direction and movement speed ✔ Ideal for maintenance, servicing and safety inspections Applications The Dräger Air Flow Tester is suitable for a wide range of applications: Testing of ventilation and air conditioning systems Leak detection in airtight systems Inspection of cleanrooms and laboratories Monitoring of positive and negative pressure areas Industrial facilities and production environments Mining and safety-relevant working areas Operating Principle After opening the test tube, air is pumped through the tube using a rubber bulb. This creates a clearly visible white smoke that follows existing air currents. This allows the source, direction and intensity of air movement to be identified immediately. The rubber bulb is not included with individual tubes or the 10-pack refill package and is available separately as a Pro Set. If the test is stopped before completion, the tube can be sealed with the supplied rubber cap and used again later, as long as sufficient smoke remains available. Technical Features Product Type Air flow test tube Application Visualization of air movements and leakages Indication White smoke generation Use Industry, cleanrooms, laboratories, HVAC, maintenance Reusable Yes, until the smoke is completely consumed Scope of Delivery Dräger Air Flow Tester smoke tube Sealing cap (Depending on the version, rubber bulb or complete set available separately) Note The Air Flow Tester is a professional testing device for the visualization of air currents. Please observe the safety data sheets and the manufacturer's instructions for use to ensure safe application. Safety Data Sheet (EN) Usage Instructions (INT) Safety Data Sheet (DE)

This mobile soldering station is used by our technicians to create professional connections on refrigeration circuits, plumbing, and heating systems. It also includes consumables such as brazing solder, soldering gases, and flux. We also recommend the following equipment for various tasks: Nitrogen gas cylinder as soldering forming gas Nitrogen gas cylinder for pressure testing Vacuum pump for evacuating refrigeration systems, for example There's much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your location is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This super assembly lift is used by our technician as a platform carrier for the professional installation of various system components, particularly HVAC and ventilation equipment beneath unfinished ceilings. The standard lifting height is up to 3.80 m. For installing heavier loads on façades, an additional fork lift with a lifting height of up to 2.51 m is available. For working heights exceeding 2 m, we generally recommend ordering suitable scaffolding. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This professional pipe freezing unit enables controlled freezing of heating and water pipes for maintenance and installation work without fully draining the system. The unit operates with R290 refrigerant and is available in the 1.1/4" version (2" optional), allowing certified Coolenvi™ technicians to cover a wide range of applications. Technical & Functional Features Suitable for heating and potable water lines Enables safe work without system shutdown Flexible hose design for improved mobility Slim clamp construction for tight installation areas Digital support indicating minimum freezing time Efficient and resource-saving operation Application Benefits The system supports forward-looking, economical and environmentally conscious installation processes. Its optimized design makes it ideal for restricted access environments. The digital time calculation enhances process reliability and planning accuracy. Scope of Delivery Freezing unit according to set configuration, hose system, clamp components and operational accessories. If listed as a rental item in your sales channel, it must generally be shipped together with the Coolenvi™ service vehicle. Due to logistical restrictions, air freight is not permitted. For island or overseas deployments, please verify shipping method and availability in advance. Coolenvi is a certified specialist company in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.

This camera is used by our technician for thermography when diagnosing errors, thermodynamics and network loads. For various tasks, we also recommend the following equipment: If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

The electric filling pump for glycol brines and water-based heat transfer fluids is a compact and powerful solution for fast filling of heating, solar, and heat pump systems. It is designed for professional use by certified contractors. The pump is suitable for water and water-like, non-flammable fluids. Use with oils, fuels, or other flammable liquids is not permitted. Technical data Power supply230 V mains operation Power consumption800 W Flow rateup to 3,300 l/h Max head46 m Suction height9 m MaterialStainless steel housing Dimensions (L × W × H)29.5 × 37 × 29 cm Weight8.1 kg Delivery scope Electric filling pump 4 m suction hose with foot valve and filter screen Application notes Filling and flushing of closed-loop systems Not suitable for continuous circulation operation Suitable for water and glycol-water mixtures Thorough cleaning required after use with brine media Self-priming design for mobile use Description The electric filling pump enables efficient and reliable filling of heating, solar, and heat pump systems. Its compact design allows flexible mobile use on construction sites and during maintenance work. Recommended accessories IBC collection tank Pressure hoses for pump outlet Transport solutions for glycol brines Pressure testing equipment before filling Antifrogen L and compatible fluids Shipping and usage notes If offered as a rental item, shipping is typically carried out together with a service vehicle. Due to logistical and transport restrictions, air freight is not available. For island or non-mainland locations, transport feasibility must be verified in advance. BIMdepot is a certified technical provider in accordance with European chemical and climate protection regulations, including Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066. When handling glycol brines, water protection regulations must be observed to protect soil and groundwater.

The IBC container 600 L (REKO) is a reconditioned industrial container for rental use for safe storage, mixing and internal handling of glycol solutions. In particular, Antifrogen type N is classified as dangerous goods and must under no circumstances be disposed of via public sewage systems or by contaminating groundwater. Use is exclusively intended for compatible, non-hazardous media. Not suitable for acids, highly aggressive chemicals or other hazardous substances. The container must be cleaned by the lessee prior to return or can optionally be processed via a recycling concept including disposal costs. Transport costs are not included and can optionally be booked via BIMconnect™. Sustainability & Service: The inner container is made of HDPE (transparent/natural) and allows easy and safe level monitoring. A stable steel grid frame ensures mechanical durability in daily use, while the robust plastic pallet enables flexible internal transport with pallet trucks or forklifts. Volume: 600 litres Inner container material: HDPE Pallet: plastic, forklift accessible Filling opening: 225 mm Outlet valve: 2" sliding valve DN50 Outlet coupling: 3/4" valve with hose connection Dimensions: 1200 × 800 × 1013 mm Condition: REKO (cleaned, inspected) Approval: no UN dangerous goods approval For different applications we also recommend: Antifrogen L - antifreeze fluid Extraction pump Hose trolley Mixing tank for glycol preparation Manual pressure filling pump station Leak test station, sealing compounds and additional accessories If the item is listed as a rental product in your distribution channel, it is typically shipped together with the Coolenvi™ service vehicle. Please note that due to logistical restrictions these rental items cannot be shipped by air freight. For island or overseas operations, shipping feasibility and availability must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.

The core drilling machine set is a reliable tool for installation work in rental and operational use. Core drilling in concrete and masonry up to a wall thickness of 350 mm is possible, enabling a wide range of technical installations. The set includes selectable standard diamond core drill bits in sizes 60, 80, 100, 120, 200, 250, and 300 mm. A 230 V power supply and a water connection must be provided on site. A manual pressure pump for cooling and flushing water is included in the set. Sustainability & Service: Cleaning after use is included in the rental price. Optional logistics services are available. Recommended accessories: Wet vacuum cleaner Protective covers Anchor dowels Worksite equipment If the item is listed as a rental product in your distribution channel, it is typically shipped together with the Coolenvi™ service vehicle. Please note that due to logistical restrictions these rental items cannot be shipped by air freight. For island or overseas operations, shipping feasibility and availability must be checked in advance. Coolenvi is a certified specialist service provider in accordance with EU Regulation 303/2008 and Implementing Regulation 2015/2066.

This condenser station is used by our technician to recover, dispose of or collect refrigerant gases. For various tasks, we also recommend the following equipment: Recycled bottles for storage or disposal Refrigeration fitting suitable for the refrigerant gas Refrigerant scale for documentation of recorded gas quantities Nitrogen Nitrogen for pressure testing before filling Much more is needed to refill... If the item is listed as a rental item in your sales channel, it will normally have to be sent together with the Coolenvi service vehicle. Please note that due to logistical constraints, these leased items cannot be shipped by air freight. If you are on an island or abroad, please check the shipping method and device availability in advance to avoid delays. Coolenvi is a certified specialist company in sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

The set is based on an electro-hydraulic, radial pressing machine and is designed for system-compliant pressing of professional piping systems. This rental equipment is exclusively available to our certified Coolenvi™ technicians. Technical Performance Features Suitable for metal, plastic, and multilayer composite systems System-dependent application up to Ø 110 mm Pressing force: 32–34 kN Press cycle: approx. 5 seconds Constant Force Technology (CFT) ensures consistent pressing force throughout the entire cycle Service interval: 40,000 press cycles / 2 years Ergonomics & Efficiency With a weight of only 3.6 kg and optimized weight distribution, the tool enables ergonomic and low-fatigue operation — even during extended use. The energy-efficient design supports productive on-site workflows. Scope of Delivery Press machine, 4Ah battery, system-relevant components according to the set configuration. If the item is listed as a rental product in your sales channel, it must generally be shipped together with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your deployment location is on an island or overseas, please verify the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with Regulation (EC) No. 303/2008 and Implementing Regulation (EU) 2015/2066.

This fork lift is used by our technician for the professional installation and positioning of heavy or bulky system components, particularly on façades or in ground-level outdoor areas. The maximum lifting height is 2.52 m. Installation tasks that cannot be safely or economically reached with this lift generally require the use of a suitable mobile crane. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, shipment should normally be carried out using the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This cylinder is used for collecting, transporting, and disposing of up to 9 kg of refrigerant gases. It is exclusively operated by certified professional technicians. All processes are fully documented via a CAFM system ensuring traceability and environmental compliance. Disposal, hazardous goods surcharge, and container cleaning are included. We also recommend for various tasks: Disposal station Refrigeration fittings Refrigerant scale Nitrogen and service valves for pressure testing before commissioning or filling Refrigerants, oil recycling containers, vacuum pumps and additional equipment If listed as a rental item, shipment is typically combined with the Coolenvi™ service vehicle. Air freight is not permitted. For island or overseas operations, please verify logistics in advance. Coolenvi is certified under EU Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This mobile scaffold is used by our technician for the professional installation of various system components, most commonly on façades, hard-to-access areas, or roof sections. For various tasks, we additionally recommend the following equipment: If the item is listed as a rental product in your sales channel, it should normally be shipped with the Coolenvi service vehicle. Please note that, for logistical reasons, these leasing items cannot be shipped by air freight. If you are located on an island or abroad, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company in the field of sustainable services in accordance with the Chemicals and Climate Protection Regulation 303/2008 and Implementing Regulation (EU) 2015/2066.

This measuring device is used by our technicians to measure quality and air flow in workplaces. We also recommend the following equipment for various tasks: Air flow meter Sound level meter Smoke tester and much more... If the item is listed as a rental item in your sales channel, it must usually be shipped with the Coolenvi service vehicle. Please note that due to logistical restrictions, these rental items cannot be shipped by air freight. If your installation is on an island or overseas, please check the shipping method and equipment availability in advance to avoid delays. Coolenvi is a certified specialist company for sustainable service in accordance with the Chemicals Climate Protection Regulation 303/2008 and the Implementing Regulation (EU) 2015/2066.

This sampling kit is used for structured detection of key indoor pollutant groups and forms the basis for comprehensive laboratory analysis of indoor air quality in residential, office, and work environments without a known single source. The product includes sampling technology and laboratory analysis only. On-site sampling, coordination, assessment, or report preparation is not part of the scope of delivery. Analytical parameters Formaldehyde from wood-based materials and furniture Wood preservatives (e.g. PCP, Lindane, DDT, PCB, Chlorthalonil, Endosulfans) Moulds and yeasts (including non-visible contamination) VOC & solvents (e.g. benzene, toluene, alcohols, aldehydes, ketones) Plasticisers (e.g. DEP, DIBP, DBP, BBP, DEHP) Asbestos fibres (optional fibre analysis using specialised methods) Sampling principle Air samples are collected using a leased electronic sampling pump onto adsorption tubes. Sampling is standardised and designed for rooms up to approx. 100 m². Additionally, mould detection is carried out using sedimentation methods including an outdoor air reference sample. Laboratory analysis Gas chromatographic VOC analysis according to VDI-oriented procedures Scanning electron microscopy fibre analysis (e.g. SEM/EDX in case of asbestos suspicion) Microbiological testing (moulds & yeasts) Comparison with guideline and assessment values Evaluation (separately defined service scope) Laboratory report with structured measurement data - included Technical evaluation of results - optional Optional cause and mitigation interpretation by specialist bodies - optional Scope of delivery General: Laboratory analysis of all commissioned parameters Standardised result documentation Indoor air adsorption sampling: Complete sampling kit incl. leased sampling pump Special adsorption tubes for VOC, PAHs, formaldehyde, solvents Mould detection (indoor air) Culture media in dishes for two rooms Culture media for outdoor air reference sample Asbestos and mineral fibre detection Surface imprint sample on a specialised sampling carrier Note Leased sampling pump is included in delivery Overdue return may incur additional charges Results are for technical assessment only and do not replace medical diagnosis BIMdepot™ process logic For structured project workflows, the involvement of a BIM Facility Manager or a VDI Hygiene Inspector as a qualified indoor air specialist is recommended. Laboratory analyses are performed independently by specialised analysis partners.