Coolenvi™ SDI-System Under Ceiling – 5.0/5.6 kW A++ Heat Pump
€3,883.95*
% €4,795.00* (19% saved)Available, delivery time: May - October
Product number:
DE-ZT-CESDI0561UD+A.1
Product information "Coolenvi™ SDI-System Under Ceiling – 5.0/5.6 kW A++ Heat Pump"
The fast, reliable and cost-effective solution for rooms with high ceilings as well as for areas outside permanently occupied work or living zones. Thanks to the space-saving ceiling installation, the entire floor area remains fully usable and flexibly configurable – a decisive advantage when room concepts or merchandise layouts change.
The system impresses with high performance and operational reliability, even under demanding environmental conditions. It is specifically designed for professional use and represents our best-selling solution for cooling retail spaces, storage areas and sales facilities. Uniform air distribution ensures a constant temperature without restricting valuable usable space.
At a glance:
- Reliable cooling operation down to −15 °C outdoor temperature
- Control of up to 16 systems with one remote control
- Consistently high energy efficiency (energy class A++)
- This solution combines flexibility, efficiency and operational reliability and is ideally suited for commercial applications with high demands on space design and air conditioning.
Indoor and outdoor unit
Add items for complete systems:
48plus extended warranty up to 48 months (one-time fee per indoor unit – only in combination with BIMcare™).
LCD wired remote control
Control option signal module (operation/fault signal and remote on/off) (only in combination with wired remote control)
Installation SET 3 m / 5 m / 10 m / 15 m or 20 m, consisting of: mounting brackets, connecting lines and accessories
GSM KIT for remote transmission of SMS alerts
Add services for installation:
Coolenvi – air conditioning installation fixed-price packages
Wall drilling
Electrical connection installation, with safety switch or fuse
Condensate drainage installation or pump, funnel trap, etc.
Roof work execution, usually with scaffolding and flat-roof mounting
Increase of refrigerant charge
Programming of setpoint limitation
Programming of automatic restart after power failure
Ideal for:
Offices, retail spaces, gastronomy up to approx. 60 m², as well as primarily server rooms and technical rooms with a maximum sensible cooling capacity of up to 3.6 kW.
| SDI - Nominal Cooling Capacity kW: | 5,00 / 1,20 - 5,60 min.-max. |
|---|---|
| SDI - Nominal Heating Capacity kW: | 5,60 / 0,90 - 7,30 min.-max. |
| SDI - Consumption kW: | 0,16/1,39/2,67 |
| SDI - Power Supply V/Ph/Hz: | 220-240/1/50 |
| SDI - Energy Class: | A++ cool / A++ heat |
| SDI - Sound pressure level dB(A): | I 28/35/37 - O 48 |
| SDI - Pipe dimension mm (inch) / m: | 6,4 (¼) - 12,7 (½) / 5 - 50 |
| SDI - Pipe Length (min.-max.) m: | 5 - 50 |
| SDI - Height Difference (max.) m: | 30 |
| SDI - IU Dimensions (HxWxD) mm: | 235 x 952 x 690 - UD |
| SDI - OU Dimensions (HxWxD) mm: | 630 x 799 x 299 - 561 |
| SDI - Weight IU/OU kg: | 23 / 45 |
| SDI - Refrigerant: | R32 |
Login
Others also ordered
New
Coolenvi™ - Mounting SET 10m I/O Commercial Devices
€929.85*
Item - Connection Length:
10m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning systems, primarily for commercial use, consisting of the following components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick connectors
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x white acrylic sealant – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 12x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 10 m control cable 5 x 1.5 mm
DE-WU097366090 – 10 m cable duct 60 x 90 mm, white
DE-HS760002001 – 10 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 30x TX screws 4.5x60 mm
DE-WU590620635 – 32x wall plugs 6 mm
DE-WU0176203535 – 2x TX screws 3x35 mm
DE-S321.4016 – 10 m CU double pipe 10, 16 mm insulated
DE-S282.0541 – 2x solder fittings 10 mm
DE-S282.0543 – 2x solder fittings 16 mm
1x nitrogen soldering gas (flat rate) content, sealant
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support beams 45°
DE-WU0862005326 – 2x holding clamp M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x body washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof installation:
DE-WU0862003056 – 2x roof support beams 1000 mm
DE-WU071392915 – 2x construction site protective mats (strips)
Variants from €926.59*
New
Coolenvi™ - Mounting SET 15m I/O Commercial Devices
€1,174.21*
Item - Connection Length:
15m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick couplings
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 12x cable ties KBL 1 polyamide with plastic tongue
DE-HS1001 – 15 m control cable 5 x 1.5 mm²
DE-WU097366090 – 15 m cable trunking 60 x 90 mm, white
DE-HS760002001 – 15 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 40x TX screws 4.5x60mm
DE-WU590620635 – 42x wall plugs 6mm
DE-WU0176203535 – 2x TX screws 3x35mm
DE-S321.4016 – 15 m CU double pipe 10,16mm insulated
DE-S282.0541 – 2x solder fittings 10mm
DE-S282.0543 – 2x solder fittings 16mm
1x nitrogen soldering gas (flat rate), sealant included
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support bars 45°
DE-WU0862005326 – 2x retaining clips M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x fender washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof mounting:
DE-WU0862003056 – 2x roof support beams 1000mm
DE-WU071392915 – 2x construction protection mats (strips)
Variants from €1,170.95*
New
Coolenvi™ - Mounting SET 20m I/O Commercial Devices
€1,420.16*
Item - Connection Length:
20m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick couplings
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 20x cable ties KBL 1 polyamide with plastic tongue
DE-HS1001 – 20 m control cable 5 x 1.5 mm²
DE-WU097366090 – 20 m cable trunking 60 x 90 mm, white
DE-HS760002001 – 20 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 50x TX screws 4.5x60mm
DE-WU590620635 – 52x wall plugs 6mm
DE-WU0176203535 – 2x TX screws 3x35mm
DE-S321.4016 – 20 m CU double pipe 10,16mm insulated
DE-S282.0541 – 2x solder fittings 10mm
DE-S282.0543 – 2x solder fittings 16mm
1x nitrogen soldering gas (flat rate), sealant included
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support bars 45°
DE-WU0862005326 – 2x retaining clips M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x fender washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof mounting:
DE-WU0862003056 – 2x roof support beams 1000mm
DE-WU071392915 – 2x construction protection mats (strips)
Variants from €1,416.90*
New
Coolenvi™ - Mounting SET 3m I/O Commercial Devices
€585.77*
Item - Connection Length:
3m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Mounting kit for small and large split air conditioning systems, mostly for commercial applications, consisting of the following individual components in the corresponding quantities and up to a maximum rated output of the air conditioning systems of approximately 12kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 3 m control cable 5 x 1.5 mm
DE-WU097366090 – 3 m cable duct 60 x 90 mm, white
DE-HS760002001 – 3 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 20x TX screws 4.5x60mm
DE-WU590620635 - 20x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4016 - 3m CU double pipe 10, 16mm insulated
DE-S282.0541 - 2x soldering sockets 10mm
DE-S282.0543 - 2x soldering sockets 16mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades above 3.5 kW cooling capacity:
DE-WU0862009062 - 2x wall brackets 630mm
DE-WU0862005006 - 2x end caps
DE-WU0862009125 - 2x Support 45 degrees
DE-WU0862005326 - 2x Holding clamp
DE-WU005791040 - 2x hex screw M10
DE-WU037110 - 2x Lock nut hex M10
DE-WU590681266 - 6x universal wall anchors 12 mm
DE-WU019210100 - 6x hexagon head screws M10x100
DE-WU041610 - 6x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 1000mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
New
Coolenvi™ - Mounting SET 5m I/O Commercial Devices
€688.50*
Item - Connection Length:
5m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning systems, primarily for residential use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick connectors
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x white acrylic sealant – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 5 m control cable 5 x 1.5 mm
DE-WU097366090 – 5 m cable duct 60 x 90 mm, white
DE-HS760002001 – 5 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 30x TX screws 4.5x60 mm
DE-WU590620635 – 32x wall plugs 6 mm
DE-WU0176203535 – 2x TX screws 3x35 mm
DE-S321.4046 – 5 m CU double pipe 6, 12 mm insulated
DE-S282.0540 – 2x solder sleeves 6 mm
DE-S282.0542 – 2x solder sleeves 12 mm
1x nitrogen soldering gas (flat rate) content, sealant
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 - 2x wall bracket 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 - 2x support beams 45°
DE-WU0862005326 - 2x holding clamp M10
DE-WU005791040 - 2x hex screw M10
DE-WU037110 - 2x hex lock nut M10
DE-WU041610 - 6x body washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof installation:
DE-WU0862003056 – 2x roof support beams 1000 mm
DE-WU071392915 – 2x construction site protective mats (strips)
Variants from €685.24*
Tip
New
Coolenvi™ AC Installation – 1 AT | 2×10h | 100 km travel – Delivery | Setup | Commissioning | Handover
€2,600.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 20 hours of team effort (2 technicians)
Travel: up to 100 km (one way)
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 100 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.
Tip
New
Coolenvi™ AC Installation – 1 AT | 2×10h | 150 km travel – Delivery | Setup | Commissioning | Handover
€2,800.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 20 hours of team effort (2 technicians)
Travel: up to 150 km (one way)
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 150 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.
Tip
New
Coolenvi™ AC Installation – 1 AT | 2×10h | 200 km travel – Delivery | Setup | Commissioning | Handover
€3,150.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 20 hours of team effort (2 technicians)
Travel: up to 200 km (one way)
Accomodation: included
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 200 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.
Tip
Coolenvi™ AC Installation – 1 AT | 2×6h | 30 km travel – Delivery | Setup | Commissioning | Handover
€1,440.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 12 hours of team effort (2 technicians)
Travel: up to 30 km (one way)
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 30 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.
Tip
New
Coolenvi™ AC Installation – 1 AT | 2×7h | 30 km travel – Delivery | Setup | Commissioning | Handover
€1,660.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 14 hours of team effort (2 technicians)
Travel: up to 30 km (one way)
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 30 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.
Tip
New
Coolenvi™ AC Installation – 1 AT | 2×8h | 30 km travel – Delivery | Setup | Commissioning | Handover
€1,880.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 16 hours of team effort (2 technicians)
Travel: up to 30 km (one way)
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 30 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.
Tip
New
Coolenvi™ AC Installation – 1 AT | 2×8h | 60 km travel – Delivery | Setup | Commissioning | Handover
€2,000.00*
Task - Work Location:
DK - From Ribe
The installation package includes the deployment of a two-person service team for a full working day, as well as a single round trip from our service hub. It provides a clearly defined, professional solution for the installation of your air conditioning system.
Scope of Services
Working time: Total 16 hours of team effort (2 technicians)
Travel: up to 60 km (one way)
Material delivery: ordered units, components, installation sets delivered curbside
Installation: indoor and outdoor units including piping
System check: pressure test, vacuum, leak test, and functional run
Commissioning: complete documented handover in operational condition
Instruction: operation, basic functions, and maintenance guidance
Additional services to be ordered separately
Electrical connection (fuse connection, RCD/MCB, repair switch)
Additional kilometers beyond 60 km
Overnight costs for longer distances or multi-day assignments
Special work (core drilling, wall penetrations, pipe adjustments)
Condensate pump, funnel siphon, or connection to existing lines
Connection or integration with Wifi or KNX
Provision of scaffolding from 2 m working height, crane transport, lifts
Provision of special tools and equipment for dismantling
Construction and follow-up work: masonry, painting, roofing, and similar trades
This ensures a structured, efficient, and professional installation with a clearly defined scope of services. Installation is carried out according to ChemKlimaschutzV, EU 573/2024 and only by certified personnel or HVAC specialists.