New
Coolenvi™ - Mounting SET 10m I/O Comfort Devices
€803.87*
Item - Connection Length:
10m
|
Item - Installation SET Variant:
For Facades < 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 10 m control cable 5 x 1.5 mm
DE-WU097366090 – 10 m cable duct 60 x 90 mm, white
DE-HS760002001 – 10 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 10m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
New
Coolenvi™ - Mounting SET 10m I/O Commercial Devices
€929.85*
Item - Connection Length:
10m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning systems, primarily for commercial use, consisting of the following components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick connectors
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x white acrylic sealant – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 12x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 10 m control cable 5 x 1.5 mm
DE-WU097366090 – 10 m cable duct 60 x 90 mm, white
DE-HS760002001 – 10 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 30x TX screws 4.5x60 mm
DE-WU590620635 – 32x wall plugs 6 mm
DE-WU0176203535 – 2x TX screws 3x35 mm
DE-S321.4016 – 10 m CU double pipe 10, 16 mm insulated
DE-S282.0541 – 2x solder fittings 10 mm
DE-S282.0543 – 2x solder fittings 16 mm
1x nitrogen soldering gas (flat rate) content, sealant
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support beams 45°
DE-WU0862005326 – 2x holding clamp M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x body washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof installation:
DE-WU0862003056 – 2x roof support beams 1000 mm
DE-WU071392915 – 2x construction site protective mats (strips)
Variants from €926.59*
New
Coolenvi™ - Mounting SET 15m I/O Comfort Devices
€1,040.03*
Item - Connection Length:
15m
|
Item - Installation SET Variant:
For Facades < 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 15 m control cable 5 x 1.5 mm
DE-WU097366090 – 15 m cable duct 60 x 90 mm, white
DE-HS760002001 – 15 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 15m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
New
Coolenvi™ - Mounting SET 15m I/O Commercial Devices
€1,174.21*
Item - Connection Length:
15m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick couplings
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 12x cable ties KBL 1 polyamide with plastic tongue
DE-HS1001 – 15 m control cable 5 x 1.5 mm²
DE-WU097366090 – 15 m cable trunking 60 x 90 mm, white
DE-HS760002001 – 15 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 40x TX screws 4.5x60mm
DE-WU590620635 – 42x wall plugs 6mm
DE-WU0176203535 – 2x TX screws 3x35mm
DE-S321.4016 – 15 m CU double pipe 10,16mm insulated
DE-S282.0541 – 2x solder fittings 10mm
DE-S282.0543 – 2x solder fittings 16mm
1x nitrogen soldering gas (flat rate), sealant included
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support bars 45°
DE-WU0862005326 – 2x retaining clips M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x fender washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof mounting:
DE-WU0862003056 – 2x roof support beams 1000mm
DE-WU071392915 – 2x construction protection mats (strips)
Variants from €1,170.95*
New
Coolenvi™ - Mounting SET 20m I/O Comfort Devices
€1,276.18*
Item - Connection Length:
20m
|
Item - Installation SET Variant:
For Facades < 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 20 m control cable 5 x 1.5 mm
DE-WU097366090 – 20 m cable duct 60 x 90 mm, white
DE-HS760002001 – 20 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 20m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
New
Coolenvi™ - Mounting SET 20m I/O Commercial Devices
€1,420.16*
Item - Connection Length:
20m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning units, primarily for commercial use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick couplings
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 20x cable ties KBL 1 polyamide with plastic tongue
DE-HS1001 – 20 m control cable 5 x 1.5 mm²
DE-WU097366090 – 20 m cable trunking 60 x 90 mm, white
DE-HS760002001 – 20 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 50x TX screws 4.5x60mm
DE-WU590620635 – 52x wall plugs 6mm
DE-WU0176203535 – 2x TX screws 3x35mm
DE-S321.4016 – 20 m CU double pipe 10,16mm insulated
DE-S282.0541 – 2x solder fittings 10mm
DE-S282.0543 – 2x solder fittings 16mm
1x nitrogen soldering gas (flat rate), sealant included
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 – 2x wall brackets 630mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 – 2x support bars 45°
DE-WU0862005326 – 2x retaining clips M10
DE-WU005791040 – 2x hex screws M10
DE-WU037110 – 2x hex lock nuts M10
DE-WU041610 – 4x fender washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof mounting:
DE-WU0862003056 – 2x roof support beams 1000mm
DE-WU071392915 – 2x construction protection mats (strips)
Variants from €1,416.90*
New
Coolenvi™ - Mounting SET 3m I/O Comfort Devices
€466.73*
Item - Connection Length:
3m
|
Item - Installation SET Variant:
For Facades < 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 3 m control cable 5 x 1.5 mm
DE-WU097366090 – 3 m cable duct 60 x 90 mm, white
DE-HS760002001 – 3 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 20x TX screws 4.5x60mm
DE-WU590620635 - 20x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 3m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
New
Coolenvi™ - Mounting SET 3m I/O Commercial Devices
€585.77*
Item - Connection Length:
3m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Mounting kit for small and large split air conditioning systems, mostly for commercial applications, consisting of the following individual components in the corresponding quantities and up to a maximum rated output of the air conditioning systems of approximately 12kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 3 m control cable 5 x 1.5 mm
DE-WU097366090 – 3 m cable duct 60 x 90 mm, white
DE-HS760002001 – 3 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 20x TX screws 4.5x60mm
DE-WU590620635 - 20x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4016 - 3m CU double pipe 10, 16mm insulated
DE-S282.0541 - 2x soldering sockets 10mm
DE-S282.0543 - 2x soldering sockets 16mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades above 3.5 kW cooling capacity:
DE-WU0862009062 - 2x wall brackets 630mm
DE-WU0862005006 - 2x end caps
DE-WU0862009125 - 2x Support 45 degrees
DE-WU0862005326 - 2x Holding clamp
DE-WU005791040 - 2x hex screw M10
DE-WU037110 - 2x Lock nut hex M10
DE-WU590681266 - 6x universal wall anchors 12 mm
DE-WU019210100 - 6x hexagon head screws M10x100
DE-WU041610 - 6x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 1000mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
New
Coolenvi™ - Mounting SET 5m I/O Comfort Devices
€612.62*
Item - Connection Length:
5m
|
Item - Installation SET Variant:
For Facades < 3.5 kW
Installation kit for small split air conditioners, primarily for residential comfort applications, consisting of the following individual components in the corresponding quantities and for a maximum rated output of approximately 3.5 kW.
Installation kit – basic equipment:
DE-WU0862104001 – 4x M8 quick-release fasteners
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® Easy mounting foam
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU0892165 – 1x acrylic sealant white – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 5 m control cable 5 x 1.5 mm
DE-WU097366090 – 5 m cable duct 60 x 90 mm, white
DE-HS760002001 – 5 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U angle 20 mm, 90°
DE-HS240016001 – 1x Tangit glue
DE-WU0176204560 – 30x TX screws 4.5x60mm
DE-WU590620635 - 32x dowels 6mm
DE-WU0176203535 - 2x TX screws 3x35mm
DE-S321.4046 - 5m CU double pipe 6, 12mm insulated
DE-S282.0540 - 2x soldering sockets 6mm
DE-S282.0542 - 2x soldering sockets 12mm
1x Flat-rate nitrogen content, soldering gas content, sealant
Mounting kit variant 1 - For facades up to 3.5 kW cooling capacity:
DE-WU0862009061 - 2x wall brackets 455mm
DE-WU0862005006 - 2x end caps
DE-WU590681266 - 4x universal wall anchors 12 mm
DE-WU019210100 - 4x hexagon head screws M10x100
DE-WU041610 - 4x washers M10
Mounting Kit Variant 2 - For floor or flat roof mounting:
DE-WU0862003056 - 2x Roof Support Beams 600mm
DE-WU071392915 - 2x Construction Site Protection Mats in Strips
Variants from €570.72*
New
Coolenvi™ - Mounting SET 5m I/O Commercial Devices
€688.50*
Item - Connection Length:
5m
|
Item - Installation SET Variant:
For Facades > 3.5kW
Installation set for small and large split air conditioning systems, primarily for residential use, consisting of the following individual components in the specified quantities and for a maximum nominal capacity of approx. 12 kW.
Installation Set – Basic Equipment:
DE-WU0862104001 – 4x M8 quick connectors
DE-WU04223830 – 4x M8 rubber washers
DE-WU04168 – 4x M8 housing washers
DE-WU0057850 – 4x M8x40 machine screws
DE-WU0892143 – 1x PURLOGIC® mounting foam
DE-WU0892165 – 1x white acrylic sealant – 310 ml
DE-WU08925102 – 1x neutral silicone sealant WHITE – 310 ml
DE-WU05021413 – 6x cable ties KBL 1 made of polyamide with plastic tongue
DE-HS1001 – 5 m control cable 5 x 1.5 mm
DE-WU097366090 – 5 m cable duct 60 x 90 mm, white
DE-HS760002001 – 5 m PVC-U pipe 20 mm
DE-HS760010001 – 1x PVC-U elbow 20 mm 90°
DE-HS240016001 – 1x Tangit adhesive
DE-WU0176204560 – 30x TX screws 4.5x60 mm
DE-WU590620635 – 32x wall plugs 6 mm
DE-WU0176203535 – 2x TX screws 3x35 mm
DE-S321.4046 – 5 m CU double pipe 6, 12 mm insulated
DE-S282.0540 – 2x solder sleeves 6 mm
DE-S282.0542 – 2x solder sleeves 12 mm
1x nitrogen soldering gas (flat rate) content, sealant
Installation Set Variant 1 – For facades from 3.5 kW cooling capacity:
DE-WU0862009062 - 2x wall bracket 630 mm
DE-WU0862005006 – 2x end caps
DE-WU0862009125 - 2x support beams 45°
DE-WU0862005326 - 2x holding clamp M10
DE-WU005791040 - 2x hex screw M10
DE-WU037110 - 2x hex lock nut M10
DE-WU041610 - 6x body washers M10
DE-WU590681266 – 6x universal wall plugs 12 mm
DE-WU019210100 – 6x hex screws M10x100
DE-WU041610 – 6x washers M10
Installation Set Variant 2 – For floor or flat roof installation:
DE-WU0862003056 – 2x roof support beams 1000 mm
DE-WU071392915 – 2x construction site protective mats (strips)
Variants from €685.24*
New
Pre-Insulated Double Copper Pipe 6/12x1mm 20m Bundle
€292.00*
Item - Quantity:
Roll
Pre-Insulated Double Copper Pipe 6/12x1mm 20m Bundle
High-quality, pre-insulated double copper pipe in 20-meter bundles for air conditioning installations. The pipe is refrigerator-grade and meets the requirements of building material class E. For use in air conditioners, split systems, and heat pumps.
Properties:
Insulation vapor diffusion resistance factor: ≥ 11000 μm
Fire behavior: DIN 13501-1; Building material class E / Insulation class BL - S1 - d0
Odor: neutral
Chemical resistance: excellent
Resistance to fungal and pest infestation: excellent
Toxicity in case of fire: none
PE protective film, color: white, embossed
Sound insulation up to 30 dB of flow and contact noise for metal pipes
Dimensions
Outer diameter: x wall thickness
6 mm x 1 mm / 12 mm x 1 mm
Insulation
Outer diameter: x insulation thickness
24 x 9 / 30 x 9 mm
General
Design: Double pipe
Construction type
Copper pipe in coils
Pipe size: metric
Bundle: per package
1 pc.
Roll length
20 m
Type: TWINSPLIT 6/12
Thermal conductivity: 0.036 W/(m*K)
Pressure
Maximum: operating pressure
183/91 barTemperature data: Ambient temperature
-45 to +90 °C
Variants from €20.60*
New
Solder adapter FSA 26M 6 mm 023U8041
€25.92*
Solder adapter FSA 26M 6 mm. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.
New
Solder adapter FSA412M 12mm 023U8045
€36.72*
Solder adapter FSA412M 12mm 023U8045. With the flare solder adapter, type FSA, flare connections can be easily and securely converted to solder connections. The adapter offers a connection method that retains the advantages of flare connections, namely the easy and quick replacement of components. At the same time, the flare solder adapter also provides this advantage with solder connections, i.e., a high degree of tightness that prevents leakage. The copper sealing ring only needs to be replaced each time the adapter is disassembled to replace flare components.